- Excellent cooling performance and low pressure drop! - Fits without AC, model year -1986 with the old front. - Compatible with AC, model year 1987- with new front. - Compatible with the battery in the original position. - New towing eye included (originals must be cut away).
The intercooler kit includes a full aluminum performance intercooler and a complete 2” / 2,75" pipe kit and silicone hoses. This kit replaces everything between the turbo outlet and the throttle body, hence the drastical improvement in airflow and cooling performance.
The do88 performance intercooler is an all-aluminum construction. With CAD-designed, flow optimized cast end tanks along with an optimized core design, it achieves the best possible cooling efficiency combined with lowest possible pressure drop!
The pressure pipes are manufactured in 2” (Turbo-Intercooler) and 2,75" (Intercooler-Throttle body) mandrel bent seamless aluminum pipes.
Custom made high quality silicone hoses with 4 layers of polyester/aramid reinforcement. These hoses can handle very high temperature and pressure!
Always remember that the OEM intercooler was designed for the power level the car was built for originally. A power increase or even very hard use of the car in standard version, may cause the OEM intercooler not having the performance that you need. So only after an engine software tune the do88 BigPack will give a performance increase over the OEM intercooler!
A common misunderstanding is that an intercooler installed in this position cannot provide good performance and that a front mounted intercooler / FMIC would be much better. But actually the do88 BigPack is far better than most FMIC installations where only a core with a small front surface is possible to install, partially behind the bumper beam which will reduce cooling capacity even further and often cooling abilities worse than the OEM intercooler are achieved.
Comes with all hardware necessary for installation.
1 piece available 
