Chapter 14 - Zodiac

Chapter 14 

Roland Sands Design 

ribbed handlebars are an 

original take on two 

timeless designs 

Chapter 14 is all about handlebars and everything 

that’s bolted to the handlebars such as grips, levers, 

control cables, risers, handlebar clamps and much 

more. No matter if you are looking for a stock 

replacement or custom handlebar, in diameters from 

1”, 1 1/4” or even Mucho-Fatzo 1 1/2” thick, you will 

find them in this section. This section also shows 

various types of handlebar controls. Stock replacement 

controls, custom style controls as well as billet 

aluminum controls from Zodiac, Performance Machine, 

Kustom Tech and Arlen Ness. Many new products are 

introduced in this catalog such as new handlebars from 

Zodiac, Biltwell, Roland Sands Design,Arlen Ness and 

Fehling, grips fromArlen Ness, KustomTech and Cycle 

Kraft, loads of different riser designs and Barnett 

“Stealth” clutch, throttle and idle cables, which feature 

black casings, as well as all-black cable adjusters 

instead of the regular chrome hardware. 

Biltwell “Dog Bone” style Stainless Steel riser top 

clamps come in polished and black 

New handlebars 

from Biltwell come 

in chrome and black in 

many, many different styles 

Cycle Kraft’s “Neo 

Fusion” grips by Kan’s 

Factory of Japan 

feature outstanding 

designs and come in black, 

polished aluminum or satin 

finish bronze

Handlebars 

PAUL YAFFE'S BAGGER NATION MONKEY BAGGER 

BARS 

These bars are bitchin'!! When Paul Yaffe took to tricking out his Street 

Glide he wanted to combine chopper styling and attitude with a unique 

handlebar that Bagger Nation could truly call it's own! Talk about 

nailing it! These handcrafted bars fit all touring models with bat wing 

fairing such as Street Glides and all the Electra Glides. Nothing will add 

more attitude to your Bagger than a set of Monkey Bagger Bars! They 

sit 12" (30 cm) tall with a 36" (91 cm) spread.They are chrome plated, 

pre-drilled for internal wires and are 1.25" in diameter. The coolest 

part is they fit all applications including 2008 to present fly-by-wire 

models! 

745034 Monkey Bagger Bars for 1986 to present FLHT and FLHX 

models 

Z-BARS 

There is no handlebar with the looks of a Zodiac Z-bar. Zodiac's Z-bars 

are available in normal 1" (2.54 cm) diameter as well as in the "Fat 

Bubba" 1 1/4" (3 cm) diameter.The Fat Bubba version has 1" diameter 

ends to allow the installation of regular handlebar controls and is 

dimpled to route the switch wire looms. As with all our Fat Bubba 

handlebars, the fat section has a flatted spot for your brake master 

cylinder.The 1" diameter Z-bar comes undimpled. 

096114 Z-bar, without dimples, 25 1/2" (65 cm) wide, 2 3/4" 

(7 cm) rise and 3" (8 cm) pull-back 

096113 Fat-Bubba Z-bar, with dimples, 1 1/4" (3 cm), thick, 29" 

(74 cm) wide, 3" (8 cm) rise and 3" (8 cm) pull-back 

14 

Handlebars, Risers, Grips, Controls & Cables 

PAUL YAFFE'S BAGGER NATION MONKEY BAGGER 

BARS 

If you're a Road King freak don't feel left out! Paul Yaffe makes killer 

bars for your model too! Paul wanted to lend all the chopper styling 

and attitude he could to the Road King platform so he took a set of his 

classic Monkey Bars,widened them a couple of inches,fit to a Road King 

and WHAM... instant attitude adjustment! These bars completely 

change the look and ride of any Road King and also fit all other 1986 to 

present Harley Models. They measure 9" (23cm) tall and have a 32" 

(81 cm) spread. They are chrome plated, pre-drilled for internal wires 

and are 1.25" in diameter.They are killer for Road Glides too and the 

coolest part is they fit for all applications including 2008 fly-by-wire 

models! 

745036 OEM Monkey Bars for 1986 to present FLHR and FLTR 

models 

NESS 1 1/4" LOWRIDER BARS 

• These are the same bars Arlen made back in 70's 

• Brought back by demand in 1 1/4" tubing 

• Looks and feels great! 

• Installation requires ZPN A01471 riser bolt kit 

• Sizes in width, rise and Pullback 

A08022 Lowrider Bars with indents 29 1/2" (75 cm) x 12" 

(30.5 cm) x 12 1/4" (31 cm) 

14-002

Handlebars 

NESS 1 1/4" RAM BARS 

• These are a re-make of the first product ever made by Arlen in 1970 

• Smooth curvaceous bends featuring 1 1/4" tubing 

• Excellent comfort 



Width Rise Pull Back 

A08033 30 1/4" 12 1/2" 10 1/4" 

A08032 30 1/4" 10 3/4" 11 1/2" 

NESS 1" & 1 1/4" V-DRAG BARS 

• Another new design from Arlen Ness featuring unique V-Styling 

• Now available in 1" and our new 1 1/4" diameter for that stylish 

"Fat-Look" 

• Work great on FXST, FXR and Dyna Glide Models 


• Measure 7 1/4" (19 cm) tall 

A08034 1 1/4" V-Drag Bars with internal wiring guide holes 

A08031 1" V-Drag Bars without indents 

NESS 1" & 1 1/4" LATE STYLE TALL FATBOB DRAG 

BARS 

• These are the famous "Ness-Drag bars" 

• Now available in 1" and our new 1 1/4" diameter for that stylish 

"Fat-Look" 

• Bars are 5" center-to-center width 


• 1" diameter bars feature 8 1/2" (21.5 cm) rise, 11" (28 cm) pullback 

and 25 1/2" (65 cm) width at bar ends 

• 1 1/4" Diameter bars feature a rise of 9 1/2" (24 cm), a 10" (25 cm) 

pullback and a 27 1/2" (70 cm) width from tip to tip 

A08006 1" Fatbob Drag Bars with indents 

A08009 1" Fatbob Drag Bars with indents and internal wiring 

holes 

A08011 1 1/4" Fatbob Drag Bars with internal wiring guide-holes 

NESS 1 1/4" FLYBARS 

• Curvaceous styling 

• Looks great on any application 

• Indented models feature internal wiring holes and guides 

• Available in two heights 



Width Rise Pull Back 

A08021 30 1/2" 9 1/2" 8 1/2" 

A08020 30 1/2" 7 1/2" 8" 




Handlebars 

NESS MODULAR HANDLEBARS 

These Patent Pending design handlebars combine function and adjustability.They feature 1 1/4" (32 mm) steel tubing with billet aluminum junction 

clamps that rotate towards or away from the rider for their desired comfort needs. All bars are drilled and slotted for internal wiring and can be 

used for cable as well as Fly-By-Wire applications. Drag bars bolt on directly to 3 1/2" center to center handlebar mounts on all Softail, Dyna and 

Sportster models. Bagger Apes and Mini Apes have the 3 1/2" center to center knurling to fit most Harley models.Available in chrome and black. 

Modular Bagger Apes for FLHT and FLHX 

Chrome Black Center Width Width Rise Pullback 

A08970 A08960 15" (38 cm) 36" (91 cm) 13" (33 cm) 8" (20 cm) 

12" Modular Drag Bars 


A08976 A08966 3 1/2" (9 cm) 26" (66 cm) 12" (30 cm) 8" (20 cm) 

10" Modular Mini Apes 


A08972 A08962 10" (25 cm) 35" (89 cm) 10" (25 cm) 5" (13 cm) 



8" Modular Drag Bars 


A08975 A08965 3 1/2" (9 cm) 25" (64 cm) 8" (20 cm) 8" (20 cm) 

NESS HANDLEBARS 

• Constructed from either 1" or 1 1/4" DOM steel tubing 

• 1 1/4" diameter bars feature 1" grip ends allowing clearance for stock and aftermarket controls designed for 1" handlebars 

• Dimensions are listed as CW for center width,W for width, R for rise and PB for pullback 

Ness Dresser style bars 

A08041 1 1/4" Diameter for stock style 

1 1/4" diameter handlebar 

clamps, drilled for internal 

wiring CW = 11" (28 cm),W = 

35 3/4" (91 cm), R= 6 1/2" 

(16.5 cm), PB = 10" (25 cm) 

Ness Flat Track style bars 

A08044 1 1/4" Diameter for 1 1/4" 

handlebar clamp, drilled for 

internal wiring CW = 7 1/2" 

(19 cm),W = 31" (79 cm), R = 

0" (0 cm), PB =6" (15 cm) 

A08016 1" Diameter with indents CW = 

5 1/2" (14 cm),W = 29 1/4" 

(74 cm), R = 4 1/2" (11 cm), PB 

= 8" (20 cm) 

Ness Ape Hanger bars 

Feature built-in risers. Require ZPN 

A01471 riser bolt kit. 

A08027 1" diameter High Bars, drilled 

for internal wiring CW = 5" 

(13 cm),W = 33" (84 cm), R = 

19" (48 cm), PB = 8" (20 cm) 

A08028 1 1/4" diameter Extra High, 

drilled for internal wiring CW = 

5" (13 cm),W = 39" (99 cm), R 

= 19" (48 cm), PB =10" 

(25 cm) 


Handlebars 

BILTWELL HANDLEBARS 

Biltwell handlebars are precision crafted out of 100% seamless 

4130 chromoly tubing with a burly .120" wall thickness. Available in 

dimpled for stock H-D applications and non-dimpled for custom 

applications. 

Moto style 

751727 Non-dimpled, chrome 

751726 Non-dimpled, black 

751729 Dimpled, chrome 

751728 Dimpled, black 

Breezer bars 





Drag style T-bars 





Mustache bars 





ZED bars 





H-bars 








Handlebars 

BILTWELL LOW DRAGS 

Riserless bar with 1/2x13 UNC threaded insert welded into the bases 

of each bar makes for a sturdy, compact and strong design. Bolt these 

up and trim the ends just as narrow as you can stand for a nice lanesplitting 

profile. These bars generally do not require longer or shorter 

cables. Chrome or Black electroplate finish and available smooth for 

custom controls or dimpled for stock controls. 

751763 Chrome, undimpled 

751762 Black, undimpled 

751765 Chrome, dimpled 

751764 Black, dimpled 

BILTWELL CHUMPS 

Nice low rise bar that works with just about any bike.Want something 

modern and comfortable, but not the wacky "check me out bro I'm so 

radical!" styling? Maybe Chumps are the just ticket. Chrome or Black 

electroplate finish and available smooth for custom controls or dimpled 

for stock controls. 







BILTWELL CLUBMAN HANDLEBARS 

Biltwell Clubman Café Racer style handlebars are precision crafted 

from 100% seamless 4130 chromoly.The wall thickness of the tubing 

is a burly .120". Available only in 1" (25.4 mm) diameter and nondimpled 

for custom applications. 

751852 Chrome 

751851 Black electroplated 

BILTWELL WINDOWS 

Built for speed in the attack position these bars are strong and narrow. 

Trim the ends off as much as possible and start dodging mirrors.Chrome 

or Black electroplate finish and available smooth for custom controls 

or dimpled for stock controls. 





BILTWELL 12" APES 

Traditional apehangers without the ridiculous dimensions of today's 

contemporary tall bars.These are about as narrow as you can go at the 

base and still mount up to a stock HD clamp. Knurled to eliminate 

slipping. Chrome or Black electroplate finish and available smooth, or 

dimpled for stock controls. 






Handlebars 

BILTWELL TRACKER HANDLEBARS 

Racy and simple design is comfortable and built for performance. 

Precision crafted with 100% seamless 4130 chromoly tubing with a 

burly .120" wall thickness. Available smooth or dimpled for stock 

controls, and in a Chrome or Black finish. These bars generally do not 

require changes to brake lines or cables on Evolution Sportsters, but 

fit Big Twins as well. All bars are knurled, 1" (25.4 mm) in diameter, 

30" (76 cm) wide, 1 3/4" (4.5 cm) end rise and have a 12 degree pull 

back. 

751766 Black, non-dimpled 

751767 Chrome, non-dimpled 




BILTWELL HANDLEBARS 

Biltwell handlebars are lightweight 4130 Chrome-moly tubing with super strong TIG welds.Available without dimples or dimpled to route the wiring 

of 1982 to present switch housings .Available in chrome or black electroplate finish. 

Frisco Rise Rise End End Width Width Center Center Pull Pull 

Style cm Rise Rise cm Width Width Back Back 

cm cm cm 

751818 Chrome, no dimples 7" 18 cm 7" 18 cm 29" 74 cm 7" 18 cm .94" 2.4 cm 

751819 Black, no dimples 7" 18 cm 7" 18 cm 29" 74 cm 7" 18 cm .94" 2.4 cm 

751822 Chrome, dimpled 7" 18 cm 7" 18 cm 29" 74 cm 7" 18 cm .94" 2.4 cm 

751823 Black, dimpled 7" 18 cm 7" 18 cm 29" 74 cm 7" 18 cm .94" 2.4 cm 

Keystone Rise Rise End End Width Width Center Center Pull Pull 

style cm Rise Rise cm Width Width Back Back 

cm cm cm 

751820 Chrome, no dimples 5" 12.5 cm 2" 5 cm 28" 71 cm 8" 20 cm 2" 5 cm 

751821 Black, no dimples 5" 12.5 cm 2" 5 cm 28" 71 cm 8" 20 cm 2" 5 cm 

751824 Chrome, dimpled 5" 12.5 cm 2" 5 cm 28" 71 cm 8" 20 cm 2" 5 cm 

751825 Black, dimpled 5" 12.5 cm 2" 5 cm 28" 71 cm 8" 20 cm 2" 5 cm 



Handlebars 

1" (2,54 CM) TRIPLE CHROME PLATED HANDLEBARS 

Changing the handlebars is the easiest way to change the look of your 

motorcycle. Zodiac stocks the widest selection of chrome handlebars 

on the market. For each model there are several triple chrome plated 

handlebars available for both early (thru 1981) as well as late (1982 to 

present) models.Late models have dimples for the wiring.All handlebars 

have Mandrel bends, your guarantee for perfect symmetrical looks and 

a constant diameter throughout the bar. More difficult to make but 

worth it, because of their rich, smooth show bike appearance 



End Width Center Pull 

Rise Width Back 

096011 Drag-Bar 0 24 3/8" 7 7/8" 5 3/4" 

no dimples (62 cm) (20 cm) (15 cm) 

096012 Drag-Bar 0 24 3/8" 7 7/8" 5 3/4" 

with dimples (62 cm) (20 cm) (15 cm) 

241242 Drag-Bar 0 28" 6 1/4" 4" 

with dimples (71 cm) (16 cm) (10 cm) 



241248 Ape Hanger 15 3/4" 39 3/8" 7" 8 1/4" 

with dimples (40 cm) (100 cm) (18 cm) (21 cm) 

241250 Ape Hanger 19 3/4" 39 3/8" 7" 8 1/4" 

no dimples (50 cm) (100 cm) (18 cm) (21 cm) 



096003 Stock Style 9 1/2" 9 1/2" 4 3/4" 9 1/2" 


096005 Stock Style 9 1/2" 27 1/2" 4 3/4" 9 1/2" 


096014 Custom Low 5 3/4" 30" 7 7/8" 13 3/4" 


096001 Custom Low 5 3/4" 30" 7 7/8" 13 3/4" 


096013 Custom Medium 8 5/8" 34 5/8" 7 7/8" 7 1/2" 

no dimples (14 cm) (88 cm) (20 cm) (19 cm) 

096008 Custom Medium 8 5/8" 34 5/8" 7 7/8" 7 1/2" 

with dimples (14 cm) (88 cm) (20 cm) (19 cm) 

096006 Custom High 13" 34 5/8" 9" 7 7/8" 


096009 Custom High 13" 34 5/8" 9" 7 7/8" 




096002 Dresser Style 5" 36 5/8" 12 1/2" 6 5/8" 


096004 Dresser Style 5" 36 5/8" 12 1/2" 6 5/8" 



Handlebars 

APEHANGERS 

Apehanger handlebars have never been away. Zodiac's apehangers are made from heavy gauge tubing, have precision mandrel bend and feature 

triple chrome plating.Available with or without dimples in 8" (20 cm) up to 20" (51 cm) heights. Dimples allow easy installation of 1982 to present 

style handlebar controls. 

With Without End Width Center Pull 

Dimple Dimple Rise Width Back 

096132 096133 8" (20 cm) 33" (84 cm) 8 1/2" (22 cm) 10" (25 cm) 

096126 096120 10" (25 cm) 36" (91 cm) 8 1/2" (22 cm) 7" (18 cm) 

096127 096121 12" (30 cm) 36" (91 cm) 8 1/2" (22 cm) 7" (18 cm) 

096128 096122 14" (36 cm) 36" (91 cm) 8 1/2" (22 cm) 7" (18 cm) 

096129 096123 16" (41 cm) 36" (91 cm) 8 1/2" (22 cm) 7" (18 cm) 

096130 096124 18" (46 cm) 36" (91 cm) 8 1/2" (22 cm) 7" (18 cm) 

096131 096125 20" (51 cm) 36" (91 cm) 8 1/2" (22 cm) 7" (18 cm) 


TYPHOON HANDLEBARS 

High quality handlebars from Zodiac, designed for style and comfort to put your bike above the rest. Made of thick wall 1" tubing, which is perfectly 

polished and triple chrome plated or black powder coated.The use of a computer-operated welding machine ensures the exact symmetry of each 

handlebar.Without dimples or holes for up to 1982 Harley models, and with dimples and holes for 1982 to present Harley models. 

No holes or dimples End Rise Width Center Width Pull Back 

096326 Chrome 8" (20 cm) 30" (76 cm) 9" (23 cm) 6 1/4" (16 cm) 

096327 Black 8" (20 cm) 30" (76 cm) 9" (23 cm) 6 1/4" (16 cm) 

096324 Chrome 12 3/4" (33 cm) 30" (76 cm) 9" (23 cm) 6 1/4" (16 cm) 

096325 Black 12 3/4" (33 cm) 30" (76 cm) 9" (23 cm) 6 1/4" (16 cm) 

With holes and dimples End Rise Width Center Width Pull Back 

096336 Chrome 8" (20 cm) 30" (76 cm) 9" (23 cm) 6 1/4" (16 cm) 

096337 Black 8" (20 cm) 30" (76 cm) 9" (23 cm) 6 1/4" (16 cm) 

096334 Chrome 12 3/4" (33 cm) 30" (76 cm) 9" (23 cm) 6 1/4" (16 cm) 

096335 Black 12 3/4" (33 cm) 30" (76 cm) 9" (23 cm) 6 1/4" (16 cm) 



Handlebars 


TOMAHAWK HANDLEBARS 

Designed by Zodiac, these 1" handlebars stand out from the crowd. 

All handlebars are knurled for use with regular or Springer handlebar 

clamps. Available in raw steel, black powder coated or with a triple 

plated chrome finish. Slotted for internal wiring and come with 

removable end caps. Endcaps can also be used for most 1" diameter 

handlebars.All Tomahawk handlebars are 30" (77 cm) wide and have 

a 4" (10 cm) pull back. 

Rise End Rise 

096603 Chrome 7 1/2" (19 cm) 3 1/2" (9 cm) 

096609 Chrome Springer 7 1/2" (19 cm) 3 1/2" (9 cm) 

096604 Black 7 1/2" (19 cm) 3 1/2" (9 cm) 

096610 Black Springer 7 1/2" (19 cm) 3 1/2" (9 cm) 

096605 Raw 7 1/2" (19 cm) 3 1/2" (9 cm) 

096611 Raw Springer 7 1/2" (19 cm) 3 1/2" (9 cm) 

096600 Chrome 12" (30 cm) 6 1/4" (16 cm) 

096606 Chrome Springer 12" (30 cm) 6 1/4" (16 cm) 

096601 Black 12" (30 cm) 6 1/4" (16 cm) 

096607 Black Springer 12" (30 cm) 6 1/4" (16 cm) 

096602 Raw 12" (30 cm) 6 1/4" (16 cm) 

096608 Raw Springer 12" (30 cm) 6 1/4" (16 cm) 

EXTENDED REACH HANDLEBARS FOR TOURING 

MODELS 

These handlebars are approximately 1 1/2" (4 cm) higher and 2" (5 cm) 

further away from the rider as the stock handlebars found on Electra 

Glide models. Also fit almost any other Harley model. Bars are drilled 

and dimpled for internal wiring.Available in chrome and black. 



9 3/4" 34" 17" 5" 

25 cm 86 cm 43 cm 13 cm 

096354 Chrome (OEM 56964-07) 

096355 Black 


096613 Domed end cap, chrome, set of 4 

096614 Domed end cap, black, set of 4 

096615 Domed end cap, raw, set of 4 

APEHANGERS 

Apehanger handlebars have never been away. Zodiac's apehangers 

are made from heavy gauge 1 1/4" tubing.All handlebars have Mandrel 

bends, your guarantee for perfect symmetrical looks and a constant 

diameter throughout the bar.These ultimate stylish handlebars feature 

"reduced end" design to fit most standard or aftermarket controls, 

grips, risers and top clamps.Available in black or chrome with an End 

Rise of up to 18" (46 cm). Feature holes with dimples. 

End Rise Width Center Width Pull Back 

096400 Chrome 12" (30,5 cm) 9" (23 cm) 36" (92 cm) 11" (28 cm) 7.5" (20 cm) 

096401 Chrome 13" (33 cm) 10" (25 cm) 36" (92 cm) 11" (28 cm) 7.5" (20 cm) 

096402 Chrome 14" (35,5 cm) 12.5" (32 cm) 36" (92 cm) 11" (28 cm) 8" (21 cm) 

096403 Chrome 16" (40,5 cm) 14.5" (37 cm) 36" (92 cm) 11" (28 cm) 8" (21 cm) 

096404 Chrome 18" (46 cm) 16" (41 cm) 36" (92 cm) 11" (28 cm) 8.5" (22 cm) 

096405 Chrome 20" (51 cm) 18" (46 cm) 36" (92 cm) 11" (28 cm) 9" (23 cm) 

096410 Black 12" (30,5 cm) 9" (23 cm) 36" (92 cm) 11" (28 cm) 7.5" (20 cm) 

096411 Black 13" (33 cm) 10" (25 cm) 36" (92 cm) 11" (28 cm) 7.5" (20 cm) 

096412 Black 14" (35,5 cm) 12.5" (32 cm) 36" (92 cm) 11" (28 cm) 8" (21 cm) 

096413 Black 16" (40,5 cm) 14.5" (37 cm) 36" (92 cm) 11" (28 cm) 8" (21 cm) 

096414 Black 18" (46 cm) 16" (41 cm) 36" (92 cm) 11" (28 cm) 8.5" (22 cm) 

096415 Black 20" (51 cm) 18" (46 cm) 36" (92 cm) 11" (28 cm) 9" (23 cm) 


Handlebars 

TOURING STYLE HANDLEBARS 

Perfect replica of the stock handlebars as found on 1971 thru 

1983 4-speed FL models and 1983 thru 1987 FLHT and FLT models. 

Also fit almost any other Harley model.Available in chrome and black. 



7 3/4" 29 3/4" 13 1/4" 5 3/4" 

20 cm 75 cm 34 cm 15 cm 

096350 Chrome (OEM 55920-83B) 

096351 Black 

DRESSER STYLE "HIDDEN WIRE" HANDLEBAR 

Now you can route your unsightly electrical wires through this "Hidden 

Wire" handlebar.The bends of this handlebar are similar to those found 

on early Dressers. Designed to fit Heritage Softail models from 1986 to 

present, but also fits all models from 1982 to present with late style 

handlebar controls that require the wiring dimple. 



096016 Hidden wire 6 3/4" 33 1/2" 12 1/2" 9 1/4" 

handlebar (17 cm) (85 cm) (32 cm) (24 cm) 

with dimples 

FLHRS STYLE HANDLEBARS 

Perfect replica of the stock handlebars as found on 2004 thru 

2007 FLHRS models. Also fit almost any other Harley model. Bars are 

drilled and dimpled for internal wiring.Available in chrome and black. 

End Center Pull 

Rise Width Width Back 

5" (13 cm) 30 1/2" (78 cm) 13 1/2" (34 cm) 11" (28 cm) 

096352 Chrome (OEM 55908-04) 

096353 Black 

BAY AREA HANDLEBAR 

A very stylish extra wide handlebar that brings back the "Forties" look 

on your machine. The bar has a brilliant chrome plated finish. Looks 

extremely good on Softail models. 

Bay End Width Center Pull 

Area Rise Width Back 

096053 no dimples 5" 38" 10" 5" 

(13 cm) (97 cm) (25 cm) (13 cm) 

096051 with dimples 5" 38" 10" 5" 

(13 cm) (97 cm) (25 cm) (13 cm) 

EXTRA WIDE "FLYER" BEACH BAR 

If you have been looking for extra-wide handlebars, you found them. 

These bars will give your motorcycle a total different look. Made of 

thick wall 1" (2,54 cm) tubing, which is perfectly polished and triple 

chrome plated.Available without dimples for models up to 1981 and 

dimpled model to fit 1982 to present models. 

Beach End Width Center Pull 

Bar Rise Width Back 

096023 no dimples 1" 40" 10" 7 1/4" 

(2,54 cm) (102 cm) (25 cm) (18 cm) 

096022 with dimples 1" 40" 10" 7 1/4" 

(2,54 cm) (102 cm) (25 cm) (18 cm) 




Handlebars 

ZODIAC'S "FAT BUBBA" LARGE DIAMETER HANDLEBARS 

Eliminate the wimpy look of the standard 1" (2.54 cm) diameter handlebar with these 1 1/4" (32 mm) diameter "Fat Bubba" handlebars. 25% 

thicker than stock, they offer quality and great comfort. These ultimate stylish handlebars feature "reduced end" design to fit all standard or 

aftermarket controls, grips, risers and top clamps. Although the bars suit stock handlebar clamps and risers, we offer matching design Bulky Fat 

covers elsewhere in this catalog to finish the look. "Fat Bubba" bars are dimpled and drilled for 1982 to present handlebar controls and wiring 

for easy installation. 




096110 Low T-Bar with dimples 6" (15 cm) 31" (74 cm) 8 1/2" (22 cm) 10 1/2" (27 cm) 

096111 Medium T-Bar dimples 8" (21 cm) 31" (74 cm) 8 1/2" (22 cm) 11 1/2" (29 cm) 

096112 High T-Bar with dimples 10" (25 cm) 31" (74 cm) 8 1/2" (22 cm) 12 1/2" (32 cm) 


096039 Buckhorn with dimples 9 1/2" (24 cm) 27 1/2" (70 cm) 4 3/4" (12 cm) 9 1/2" (24 cm) 

096040 XLX Style with dimples 8 5/8" (22 cm) 34 5/8" (88 cm) 7 7/8" (20 cm) 7 1/2" (19 cm) 

096034 Low Apehanger dimples 10" (25 cm) 37 1/2" (95 cm) 11 1/2" (29 cm) 10" (25 cm) 

096035 Medium Apehanger dimples 12" (30 cm) 35 1/2" (90 cm) 11 1/2" (29 cm) 11 1/2" (29 cm) 

096036 High Apehanger with dimples 16" (41 cm) 39 1/2" (100 cm) 11 1/2" (29 cm) 11 1/2" (29 cm) 


Handlebars 


096037 Road King Style dimples 5 1/2" (14 cm) 36 1/2" (93 cm) 12" (30 cm) 16" (41 cm) 

096038 Knuckle Style with dimples 4 1/2" (11 1/2 cm) 36 1/2" (93 cm) 10 1/2" (27 cm) 8 1/2" (22 cm) 

096144 Staghorn with dimples 2 1/2" (6 cm) 36" (91 cm) 11" (28 cm) 8 3/4" (22 cm) 

094140 Wildcat V-Style dimples 12 1/2" (32 cm) 30 1/2" (77 cm) 8 1/2" (22 cm) 18 1/2" (47 cm) 

096143 Wildcat Radial T-Bar with dimples 10" (25 cm) 31 3/4" (81 cm) 8 1/2" (22 cm) 4" (10 cm) 

096145 Broken Arrow Z-Bar with dimples 15" (38 cm) 33" (81 cm) 12" (30 cm) 10" (25 cm) 

096149 Wildcat XT T-Bar with dimples 15" (38 cm) 33 1/2" (85 cm) 10" (25 cm) 10" (25 cm) 

Width Center Pull 

Width Back 

38" 11" 7 1/4" 

96.5 cm 28 cm 18.5 cm 

height 

096360 Chrome 8" (20 cm) 

096361 Black 8" (20 cm) 

096362 Chrome 12" (31 cm) 

096363 Black 12" (31 cm) 

096364 Chrome 13" (33 cm) 

096365 Black 13" (33 cm) 

096366 Chrome 16" (41 cm) 

096367 Black 16" (41 cm) 

ZODIAC'S FAT BUBBA LARGE DIAMETER SIX-BEND 

BAGGER STYLE HANDLEBARS 

Eliminate those stock flimsy 1" (25.4 mm) diameter handlebars and 

go for the beefy looks of these 1 1/4" (32 mm) diameter Fat Bubba 

handlebars. These handlebars feature standard 1" diameter ends to 

accommodate for stock and most aftermarket handlebar controls and 

also have regular 1" diameter mid section to work with the stock onepiece 

upper handlebar clamp. Bars are drilled and dimpled for internal 

wiring.Available in chrome and black in 8" (20cm), 12" (31 cm), 13" 

(33 cm) and 16" (41 cm) high. 




Handlebars 

PHAT HANDLEBARS 

These USA made bars have the ultimate style, great comfort and quality.At 1 1/4" (3 cm) diameter, they are 25% thicker than stock, and eliminate 

the wimpy look of the standard 1" (2,54 cm) handlebars. The "step down" design fits all standard or aftermarket controls, grips, risers and top 

clamps. For an even smoother finish you may combine these handlebars with Phat top-clamp covers found elsewhere in this catalog.All handlebars 

are dimpled and drilled for 1982 to present handlebar controls and wiring for easy installation. 




741301 6" T-Bar with dimples 4" (10 cm) 31" (79 cm) 8 1/2" (22 cm) 10 1/2" (27 cm) 

741326 6" Low Profile Drag with dimples 4" (10 cm) 30 1/2" (77 cm) 8 1/2" (22 cm) 14 1/2" (37 cm) 

741302 8" T-Bar with dimples 5" (13 cm) 31" (79 cm) 8 1/2" (22 cm) 11 1/2" (29 cm) 

741303 10" T-Bar dimples 6" (15 cm) 31" (79 cm) 8 1/2" (22 cm) 12 1/2" (32 cm) 

741324 8" Chopper Drag-Bar dimples 8" (20 cm) 31" (79 cm) 3 1/2" (9 cm) 0 

741325 10" Chopper Drag-Bar with dimples 10" (25 cm) 31" (79 cm) 3 1/2" (9 cm) 0 

14-014

Handlebars 


741306 High Ape with dimples 8 1/2" (22 cm) 36 1/2" (93 cm) 11 1/2" (29 cm) 10" (25 cm) 

741307 High Ape dimples 10" (25 cm) 37 1/2" (94 cm) 11 1/2" (29 cm) 10" (25 cm) 

741308 High Ape with dimples 12,5" (32 cm) 38 1/2" (98 cm) 11 1/2" (29 cm) 10" (25 cm) 

741309 High Ape dimples 16" (41 cm) 39 1/2" (100 cm) 11 1/2" (29 cm) 11 1/2" (29 cm) 

741323 Ape Hanger Bar with dimples 20" (51 cm) 39 1/2" (100 cm) 11 1/2" (29 cm) 11 1/2" (29 cm) 



741312 Road King Bar dimples 5 1/2" (14 cm) 32 1/2" (83 cm) 12" (30 cm) 16" (41 cm) 

741311 Dresser Springer with dimples 5 1/2" (14 cm) 34 1/2" (88 cm) 12" (30 cm) 12" (30 cm) 

741322 Heritage Style dimples 4 1/2" (11 cm) 32 1/2" (83 cm) 12" (30 cm) 16" (41 cm) 

741304 Knuckle Style with dimples 2" (5 cm) 36 1/2" (93 cm) 10 1/2" (27 cm) 8 1/2" (22 cm) 

741305 Springer Knuckle Style with dimples 2" (5 cm) 36 1/2" (93 cm) 10 1/2" (27 cm) 8 1/2" (22 cm) 

741313 Dragster Bar with dimples 0 31" (79 cm) 8 1/2" (22 cm) 6" (15 cm) 

741314 Dragster Springer dimples 0 31" (79 cm) 8 1/2" (22 cm) 6" (15 cm) 



Handlebars 

AMERICAN MADE MUCHO-FATZO HANDLEBARS 

Eliminate that wimpy look of your stock 1" (2,54 cm) diameter handlebars with these 50% thicker Mucho-Fatzo bars. Made in the U.S.A. for style, 

comfort and quality. The "step down" design fits all standard or aftermarket controls and grips. T-Bars bolt straight on to all stock and most 

aftermarket top triple trees. Mucho-Fatzo Ape Hangers must be installed in conjunction with the matching Mucho-Fatzo risers and topclamps.All 

Mucho-Fatzo bars are dimpled and drilled for 1982 to present handlebar controls and wiring for easy installation. 




741315 T-Bar with dimples 5" (13 cm) 31" (79 cm) 8 1/2" (22 cm) 4 1/2" (11 cm) 

741316 T-Bar with dimples 7" (18 cm) 31" (79 cm) 8 1/2" (22 cm) 5" (13 cm) 

741317 T-Bar with dimples 9" (23 cm) 31" (79 cm) 8 1/2" (22 cm) 6 1/8" (16 cm) 


741318 Low Ape Hanger with dimples 13" (33 cm) 38 1/2" (98 cm) 11 1/2" (29 cm) 10" (25 cm) 

741319 Medium Ape Hanger with dimples 16" (41 cm) 39 1/2" (100 cm) 11 1/2" (29 cm) 11 1/2" (29 cm) 

741320 High Ape Hanger with dimples 18" (46 cm) 39 1/2" (100 cm) 11 1/2" (29 cm) 11 1/2" (29 cm) 

741321 Aluminum riser set for use with 1 1/2" 

handlebars 


Handlebars 

BURLY NARROW APEHANGERS 

Burly Narrow Apehangers look extremely good on Sportsters and Dyna's 

with Narrow Glide front forks, but fit bikes with Wide Glide front ends 

too. All Narrow Glide Apes are 1" (25.4 mm) in diameter, have a 5" 

(12.7 cm) center width, 7" (17.8 cm) pull back and are 32 1/2" (83 cm) 

wide. Bars are dimpled and slotted for easy internal wiring, available 

in black and chrome and in 3 different heights. 

744805 12" (30.5 cm) high, chrome 

744806 12" (30.5 cm) high, black 

744807 14" (36 cm) high, chrome 

744808 14" (36 cm) high, black 

744809 16" (41 cm) high, chrome 

744810 16" (41 cm) high, black 




Handlebars 

FEHLING HANDLEBARS 

High quality handlebars from the German manufacturer Fehling, designed for style and comfort to put your bike above the crowd. The use of a 

computer-operated bending machine ensures the exact symmetry of each handlebar. Nearly all Fehling handlebars are TÜV approved with 1" 

(2,54 cm) diameter. Handlebars are available in various models in either high quality chrome or black powder coated: without dimples for up to 

1982 Harley models, and with dimples for 1982 to present Harley models. Some models are available "slotted", to allow you to guide all wiring 

through handlebar and risers. Please note that this requires large diameter risers, and hollow studs.There is a wide variety of styles available, but 

remember, with any Fehling handlebar you are ready to race, chase, cruise and show. 




731629 Dirt Tracker no dimples 4" (10 cm) 36" (91 cm) 10" (25 cm) 4 1/2" (11 cm) 

731630 Dirt Tracker with dimples 4" (10 cm) 36" (91 cm) 10" (25 cm) 4 1/2" (11 cm) 

731587 Black Dirt Tracker with dimples 4" (10 cm) 36" (91 cm) 10" (25 cm) 4 1/2" (11 cm) 

731631 Electra Glide with dimples 6 1/2" (16 cm) 35" (89 cm) 14 1/2" (37 cm) 11 1/2" (29 cm) 

731632 Buckhorn Low with dimples 2 1/2" (6 cm) 40" (100 cm) 11" (28 cm) 11" (28 cm) 

731633 Buckhorn High with dimples 5" (12 cm) 41" (104 cm) 8" (20 cm) 14" (35 cm) 

731634 Superbar with dimples 5" (12 cm) 39" (99 cm) 9" (23 cm) 8 1/2" (22 cm) 

731660 Apehanger Low no dimples 10 1/2" (27 cm) 35 1/2" (90 cm) 7" (18 cm) 10" (25 cm) 

731661 Apehanger Low with dimples 10 1/2" (27 cm) 35 1/2" (90 cm) 7" (18 cm) 10" (25 cm) 

731662 Apehanger Medium no dimples 12" (31 cm) 36" (92 cm) 7" (18 cm) 8" (20 cm) 

731663 Apehanger Medium with dimples 12" (31 cm) 36" (92 cm) 7 (18 cm) 8" (20 cm) 

731597 Apehanger Medium 3-hole 12" (31 cm) 36" (92 cm) 7" (18 cm) 8" (20 cm) 

731598 Apehanger Medium 4-hole 12" (31 cm) 36" (92 cm) 7" (18 cm) 8" (20 cm) 

731664 Apehanger High no dimples 16 1/2" (42 cm) 38" (96 cm) 7" (18 cm) 8 1/2" (22 cm) 

731665 Apehanger High with dimples 16 1/2" (42 cm) 38" (96 cm) 7" (18 cm) 8 1/2" (22 cm) 

731666 Apehanger Sky High no dimples 18" (46 cm) 38" (96 cm) 8 1/2" (21 cm) 6 1/4" (16 cm) 

731667 Apehanger Sky High with dimples 18" (46 cm) 38" (96 cm) 8 1/2" (21 cm) 6 1/4" (16 cm) 

731623 Apehanger Near Space no dimples 20" (50 cm) 40" (100 cm) 8" (20 cm) 6 1/4" (16 cm) 

731624 Apehanger Near Space with dimples 20" (50 cm) 40" (100 cm) 8" (20 cm) 6 1/4" (16 cm) 


Handlebars 


731599 Apehanger Medium Black, with dimples 12" (30 cm) 36" (92 cm) 7" (18 cm) 8" (20 cm) 

731604 Apehanger High Black, with dimples 16" (41 cm) 38" (96 cm) 7" (18 cm) 6 1/4" (16 cm) 

731614 Apehanger Sky High Black, with dimples 18" (46 cm) 38" (96 cm) 8 1/2" (21 cm) 6 1/4" (16 cm) 

731617 Apehanger Near Space Black, with dimples 20" (50 cm) 40" (100 cm) 8" (20 cm) 6 1/4" (16 cm) 

731639 Apehanger Low Black, with dimples 10 1/2" (27 cm) 35 1/2" (90 cm) 7" (18 cm) 10" (25 cm) 


731615 V-Bar, raked triple trees, with dimples 0 38" (97 cm) 8" (20 cm) 4" (10 cm) 

Notes: 

• DIMPLED HANDLEBARS HAVE INDENTS AT THE HANDLEBAR CONTROLS TO ROUTE THE SWITCH WIRING. 

• 3-HOLE HANDLEBARS ALLOW ROUTING OF THE SWITCH WIRING THROUGH THE HANDLEBARS. WIRING 

EXITS IN THE MID LOWER PART OF THE HANDLEBARS. 

• 4-HOLE HANDLEBARS ALLOW ROUTING OF THE SWITCH WIRING THROUGH THE HANDLEBARS AND "HIDDEN 

WIRE" RISERS SUCH AS ZPN 731590, 731591 OR 731592. 




Handlebars 




731600 Drag-Bar Narrow with dimples 0 25" (64 cm) 7 1/2" (19 cm) 5" (13 cm) 

731605 Drag-Bar with dimples 0 28" (71 cm) 9" (23 cm) 5 1/2" (14 cm) 

731690 Drag-Bar Black with dimples 0 28" (71 cm) 9" (23 cm) 5 1/2" (14 cm) 

731608 Drag-Bar with dimples 0 30" (76 cm) 12" (30 cm) 3" (8 cm) 

731601 Drag-Bar no dimples 0 32" (81 cm) 8 1/4" (21 cm) 4 3/4" (12 cm) 

731606 Drag-Bar with dimples 0 32" (81 cm) 8 1/4" (21 cm) 4 3/4" (12 cm) 

731691 Drag-Bar Black with dimples 0 32" (81 cm) 8 1/4" (21 cm) 4 3/4" (12 cm) 

731693 Drag-Bar 4-hole 0 32" (81 cm) 8 1/4" (21 cm) 4 3/4" (12 cm) 

731692 Drag-Bar Wide Black with dimples - 36" 12" 5" 

731694 Drag-Bar Wide 4-hole 0 36" (91 cm) 12" (30 cm) 5" (13 cm) 

731618 Drag-Bar Wide 3-hole 0 36" (91 cm) 12" (30 cm) 5" (13 cm) 

731602 Drag-Bar Extra Wide no dimples 0 38" (97 cm) 13 1/2" (34 cm) 6 1/2" (17 cm) 

731607 Drag-Bar Extra Wide with dimples 0 38" (97 cm) 13 1/2" (34 cm) 6 1/2" (17 cm) 

731603 Drag-Bar Extreme Wide no dimples 0 40 1/2" (103 cm) 15" (38 cm) 7" (18 cm) 

731609 Drag-Bar Extreme Wide with dimples 0 40 1/2" (103 cm) 15" (38 cm) 7" (18 cm) 


731645 Z-Bar no dimple 10" (25 cm) 28" (71 cm) 9 1/2" (24 cm) 5 1/2" (14 cm) 


Handlebars 


731680 Dirty Bar Extra Wide no dimples 8 1/4" (21 cm) 38" (97 cm) 11" (27 cm) 7" (18 cm) 

731681 Dirty Bar Extra Wide with dimples 8 1/4" (21 cm) 38" (97 cm) 11" (27 cm) 7" (18 cm) 

731682 Dirty Bar Extra Wide 8 1/4" (21 cm) 38" (97 cm) 11" (27 cm) 7" (18 cm) 

731683 Dirty Bar Extra Wide 4-hole 8 1/4" (21 cm) 38" (97 cm) 11" (27 cm) 7" (18 cm) 

731685 Flat-Track Bar Wide no dimples 4" (10 cm) 36" (91 cm) 12 1/2" (32 cm) 10" (25 cm) 

731686 Flat-Track Bar Wide with dimples 4" (10 cm) 36" (91 cm) 12 1/2" (32 cm) 10" (25 cm) 

731687 Flat-Track Bar Wide Black, with dimples 4" (10 cm) 36" (91 cm) 12 1/2" (32 cm) 10" (25 cm) 

731688 Flat-Track Bar Wide 4-hole 4" (10 cm) 36" (91 cm) 12 1/2" (32 cm) 10" (25 cm) 

731670 Flyerbar Extra Wide no dimples 1 1/2" (4 cm) 40" (102 cm) 7 1/2" (19 cm) 5" (13 cm) 

731671 Flyerbar Extra Wide w dimples 1 1/2" (4 cm) 40" (102 cm) 7 1/2" (19 cm) 5" (13 cm) 

731672 Flyerbar Extra Wide Black, with dimples 1 1/2" (4 cm) 40" (102 cm) 7 1/2" (19 cm) 5" (13 cm) 

731673 Flyerbar Extra Wide 4-hole 1 1/2" (4 cm) 40" (102 cm) 7 1/2" (19 cm) 5" (13 cm) 

731675 Flyerbar Medium no dimples 4" (10 cm) 34 1/2" (88 cm) 8" (20 cm) 7 1/2" (19 cm) 

731676 Flyerbar Medium with dimples 4" (10 cm) 34 1/2" (88 cm) 8" (20 cm) 7 1/2" (19 cm) 

731677 Flyerbar Medium Black, with dimples 4" (10 cm) 34 1/2" (88 cm) 8" (20 cm) 7 1/2" (19 cm) 

731678 Flyerbar Medium 4-hole 4" (10 cm) 34 1/2" (88 cm) 8" (20 cm) 7 1/2" (19 cm) 

Notes: 









Handlebars 


731593 Dirty Bar Extra Wide 3-hole 8 1/4" (21 cm) 38" (97 cm) 11" (27 cm) 7" (18 cm) 

731596 Power Bar Extra Wide 4-hole 5" (13 cm) 41" (104 cm) 7" (18 cm) 7" (18 cm) 

731594 Flyerbar Extra Wide 3-hole 4" (10 cm) 40" (102 cm) 7" (18 cm) 7" (18 cm) 

731595 Flyerbar 3-hole 2" (6 cm) 33" (84 cm) 6" (15 cm) 6" (15 cm) 

731610 Straight Bar Extra Wide no dimples 0 39" (99 cm) 0 0 

731612 Straight Bar Extra Wide with dimples 0 39" (99 cm) 0 0 

731613 Straight Bar Wide with dimples 0 33" (84 cm) 0 0 




731950 Superbike with dimples 3" (8 cm) 32" (81 cm) 12" (30 cm) 4" (10 cm) 

731951 Dresser Style with dimples 8" (20 cm) 39" (99 cm) 15 1/2" (39 cm) 8 1/2" (22 cm) 

731952 Beach Bar with dimples 2 1/2" (6 cm) 36" (91 cm) 8 1/2" (22 cm) 6" (15 cm) 

731643 Western Bar High with dimples 10" (25 cm) 32 1/2" (83 cm) 8" (20 cm) 6 3/4" (17 cm) 

731642 Western Bar Medium 7" (18 cm) 39" (100 cm) 10 1/4" (26 cm) 8 1/4" (21 cm) 

731644 Cruiser Bar with dimples 2 3/4" (7 cm) 39 3/4" (101 cm) 10 1/4" (26 cm) 11 1/2" (29 cm) 

731647 Super-Bike-Bar Small no dimples 3" (8 cm) 32"(81 cm) 8 3/4" (22 cm) 4 1/8" (11 cm) 

731648 Super-Bike-Bar Small with dimples 3" (8 cm) 32" (81 cm) 8 3/4" (22 cm) 4 1/8" (11 cm) 

731659 Power-Bike-Bar no dimples 5 1/4" (14 cm) 41 1/4" (105 cm) 7 1/2" (19 cm) 7" (18 cm) 

731668 Power-Bike-Bar Black, with dimples 5 1/4" (14 cm) 41 1/4" (105 cm) 7 1/2" (19 cm) 7" (18 cm) 


Handlebars 

FEHLING HANDLEBARS FOR V-ROD 

Designed for use on all 2002 and later V-Rod models, the handlebars have all dimples and holes to allow you to route the handlebar switch wiring 

thru the handlebars. Mounting holes to accept the OEM instrument console are already welded in place.Available in four models. 


731697 Drag Bar w dimples 5 1/2" (14 cm) 32 1/4" (82 cm) 6 1/2" (17 cm) 3 3/4" (10 cm) 

731696 Super Bike Bar w dimples 7 1/4" (18 cm) 36 1/4" (92 cm) 7 1/4" (18 cm) 3 1/2" (9 cm) 

731698 Flyerbar w dimples 6" (15 cm) 33 1/2" (85 cm) 7 1/2" (19 cm) 5 1/2" (14 cm) 

731641 Ape Hanger Low with dimples 16 3/4" (27 cm) 35 1/2" (90 cm) 7" (18 cm) 7" (18 cm) 

Notes: 









Handlebars 

FEHLING T-BAR 

Fehling's TÜV approved T-Bar. 


731654 T-Bar no dimples 8 3/4" 31 1/2" 4" 6 1/4" 



FEHLING DRAGBAR WITH INTEGRATED 

TURNSIGNALS 

The solutions for those who want a clean front end and turn signals 

are mandatory. Fehling has integrated the turn signals into the 

handlebar. Handlebars are dimpled for use with 1982 to present 

handlebar controls.Available in black or chrome. 


731620 Chrome with dimples - 39" (99 cm) 10" (25 cm) 2,36" (6 cm) 

731669 Black with dimples - 39" (99 cm) 10" (25 cm) 2,36" (6 cm) 

731619 Chrome with dimples - 38" (96 cm) 16 1/2" (42 cm) 4,33" (11 cm) 

731625 Black with dimples - 38" (96 cm) 16 1/2" (42 cm) 4,33" (11 cm) 

731638 Replacement lens 

731674 Replacement bulb 

Notes: 







Handlebars 

FEHLING FAT BAR 1 1/4" HANDLEBARS 

Fehling's 1 1/4" (31.75 mm) diameter Fat Bars for use with 1 1/4" 

diameter risers have 1" (25.4 mm) diameter grip ends for stock and 

most aftermarket handlebar controls.The 1 1/4" diameter handlebars 

were introduced in 2002 on Screamin' Eagle Touring models,in 2005 on 

the Screamin' Eagle Fat Boy, in 2007 on all Fat Boys, in 2008 on the 

FXDF Dyna Fat Bob and in 2010 on the FXDWG Dyna Wide Glide. Can 

also be used on other models when used with stock or aftermarket 

1 1/4" diameter risers.The handlebars feature drilled dimples, 2 drilled 

holes where the risers go, as well as a center slot to route the handlebar 

control wires.Available in chrome or black finish.TÜV approved. 

Width Pull Back End Rise Center Width 

732014 Z-Bar, chrome 34.3" (87 cm) 4.7" (12 cm) 3.5" (9 cm) 12" (30.5 cm) 

732015 Z-Bar, black 34.3" (87 cm) 4.7" (12 cm) 3.5" (9 cm) 12" (30.5 cm) 

732016 High Ape-hanger, chrome 37.4" (95 cm) 7.7" (19.5 cm) 13.8" (35 cm) 12.2" (31 cm) 

732017 High Ape-hanger, black 37.4" (95 cm) 7.7" (19.5 cm) 13.8" (35 cm) 12.2" (31 cm) 

732018 Apehanger, chrome 36.4" (92.5 cm) 7.7" (19.5 cm) 10.4" (26.5 cm) 12.2" (31 cm) 

732019 Apehanger, black 36.4" (92.5 cm) 7.7" (19.5 cm) 10.4" (26.5 cm) 12.2" (31 cm) 

732020 Dirty-Bar, chrome 39" (99 cm) 9" (23 cm) 14.8" (37.5 cm) 14.8" (37.5 cm) 

732021 Dirty-Bar, black 39" (99 cm) 9" (23 cm) 14.8" (37.5 cm) 14.8" (37.5 cm) 

732022 Drag-Bar, chrome 32" (81.5 cm) 4.7" (12 cm) 0 8.9" (22.5 cm) 

732023 Drag-Bar, black 32" (81.5 cm) 4.7" (12 cm) 0 8.9" (22.5 cm) 

732024 Flyer-Bar, chrome 34.3" (87 cm) 7.1" (18 cm) 3" (7.5 cm) 6.9" (17.5 cm) 

732025 Flyer-Bar, black 34.3" (87 cm) 7.1" (18 cm) 3" (7.5 cm) 6.9" (17.5 cm) 




Handlebars 

FEHLING HOLLISTER FAT BARS 

Fehling's 1 3/16" (30 mm) diameter Hollister Fat Bars are for use with 

regular 1" (25.4 mm) diameter risers and have 1" (25.4 mm) diameter 

grip ends for use with stock and most aftermarket handlebar controls. 

The handlebars feature drilled dimples and a center slot to route the 

handlebar control wires. Available in chrome or black finish. TÜV 

approved. 


732010 Low Z-Bar, chrome 34.3" (87 cm) 4.7" (12 cm) 3.5" (9 cm) 12" (30.5 cm) 

732011 Low Z-Bar, black 34.3" (87 cm) 4.7" (12 cm) 3.5" (9 cm) 12" (30.5 cm) 

732012 High Z-Bar, chrome 35.4" (90 cm) 4.7" (12 cm) 7.9" (20 cm) 15" (38 cm) 

732013 High Z-Bar, black 35.4" (90 cm) 4.7" (12 cm) 7.9" (20 cm) 15" (38 cm) 



FEHLING SIX-BEND 1 1/4" HANDLEBARS 

Fehling's 1 1/4" (31.75mm) diameter handlebars for use with 1 1/4" 

diameter risers have 1" (25.4 mm) diameter grip ends for stock and 

most aftermarket handlebar controls.The 1 1/4" diameter handlebars 

were introduced in 2002 on Screamin' Eagle Touring models,in 2005 on 

the Screamin' Eagle Fat Boy, in 2007 on all Fat Boys, in 2008 on the 

FXDF Dyna Fat Bob and in 2010 on the FXDWG Dyna Wide Glide. Can 

also be used on other models when used with stock or aftermarket 

1 1/4" diameter risers.The handlebars feature drilled dimples, 2 drilled 

holes where the risers go, as well as a center slot to route the handlebar 

control wires. Fehling Six-Bend style bars are available in two different 

heights and in chrome or black finish.TÜV approved. 

Notes: 

• DIMPLED HANDLEBARS HAVE INDENTS AT THE 

HANDLEBAR CONTROLS TO ROUTE THE SWITCH 

WIRING. 

• 3-HOLE HANDLEBARS ALLOW ROUTING OF THE 

SWITCH WIRING THROUGH THE HANDLEBARS. 

WIRING EXITS IN THE MID LOWER PART OF 

THE HANDLEBARS. 


SWITCH WIRING THROUGH THE HANDLEBARS 

AND "HIDDEN WIRE" RISERS SUCH AS ZPN 

731590, 731591 OR 731592. 


732026 Low, chrome 37.4" (95 cm) 9.6" (24.5 cm) 11.2" (28.5 cm) 12.8" (32.5 cm) 

732027 Low, black 37.4" (95 cm) 9.6" (24.5 cm) 11.2" (28.5 cm) 12.8" (32.5 cm) 

732028 High, chrome 40.4" (102.5 cm) 10.4" (26.5 cm) 13.2" (33.5 cm) 13.6" (34.5 cm) 

732029 High, black 40.4" (102.5 cm) 10.4" (26.5 cm) 13.2" (33.5 cm) 13.6" (34.5 cm) 


Handlebars 

"ROLAND SANDS DESIGN" HANDLEBARS 

Designed by Roland Sands, these 1" handlebars stand out from the 

rest. All handlebars are knurled for use with regular or Springer 

handlebar clamps.Available in raw steel, black powder coated or with 

a chrome finish. Chrome and black handlebars are also slotted and 

drilled for internal wiring and come with removable chrome billet end 

caps. Raw handlebars come with raw billet end caps. 

Vintage 


12" (30 cm) 30" (76 cm) 6 1/2" (16 cm) - 

740620 Chrome finish 

740621 Raw steel 

740722 Black powder coated 

751975 Black OPS 

740622 Springer, chrome finish 

740623 Springer, raw steel 

740723 Springer, black powder coated 

751976 Springer, Black OPS 

Short Stack 


7 1/2" (19 cm)30" (76 cm) 6 1/2" (16 cm) - 


740708 Raw steel 



740715 Springer, chrome finish 

740713 Springer, Raw steel 

740714 Springer, black powder coated 

751974 Springer, Black OPS 

751977 Replacement end caps, pair 

Notes: 

• DIMPLED HANDLEBARS HAVE INDENTS AT THE 

HANDLEBAR CONTROLS TO ROUTE THE SWITCH 

WIRING. 


SWITCH WIRING THROUGH THE HANDLEBARS. 

WIRING EXITS IN THE MID LOWER PART OF 

THE HANDLEBARS. 


SWITCH WIRING THROUGH THE HANDLEBARS 

AND "HIDDEN WIRE" RISERS SUCH AS ZPN 

731590, 731591 OR 731592. 




Handlebars 

ROLAND SANDS DESIGNS VINTAGE KING APE 

It seems like you can never make an ape hanger bar too big so Roland 

shot for the sky with his King Ape. Borrowing some style from his classic 

Vintage bar, he made everything a little larger, including the tubing 

diameter to give you a punk tall bar with attitude, style and quality 

hand TIG welding. King Ape bars are 1 1/4" (32 mm) fat bars with a 

regular 1" diameter center mounting and 1" ends to accept stock and 

aftermarket controls. Bars are slotted and drilled for internal wiring 

and come in chrome or black powder coated. 



Rise Width Center Pull 

Width 

Back 

740925 Black 19" (48 cm) 38" (96 cm) 9 3/4" (25 cm) 6 1/4" (16 cm) 

751979 Black OPS 19" (48 cm) 38" (96 cm) 9 3/4" (25 cm) 6 1/4" (16 cm) 

740926 Chrome 19" (48 cm) 38" (96 cm) 9 3/4" (25 cm) 6 1/4" (16 cm) 

740918 Black 16’’(41 cm) 36 1/2" (93 cm) 9 3/4" (25 cm) 6’’ (15 cm) 

751978 Black OPS 16’’(41 cm) 36 1/2" (93 cm) 9 3/4" (25 cm) 6’’ (15 cm) 

740919 Chrome 16’’(41 cm) 36 1/2" (93 cm) 9 3/4" (25 cm) 6’’ (15 cm) 

ROLAND SANDS DESIGN RIBBED HANDLEBARS 

These RSD handlebars are an original take on two timeless designs. 

Roland took these classic shapes and added his signature radius ribbing 

for an extra detail.These CNC milled ribbed accents match perfectly with 

Roland's Nostalgia ribbed cover line.These bars are a stand out and a 

beautiful finishing touch to any custom build or customized stocker. 

Not to tall,not to short these bars are perfect for a clean yet comfortable 

ride while still looking tough. Bars are 1" diameter to accept stock or 

aftermarket handlebar controls. Hand built and TIG welded in the good 

ol' USA. The T-Bar is internally threaded for use with 1/2"-13 UNC 

hardware and slotted for stock handlebar controls, for internal wiring 

the lower wiring holes must be drilled.The Bobber is slotted and drilled 

for internal wiring and is knurled 3 1/2" (89 mm) on-center for use 

with most stock and aftermarket forks, except Springers. 

Width Rise Center Width Pull Back 

740894 RSD Ribbed Bobber 33" (84 cm) 9" (23 cm) 5 3/4" (15 cm) 5 1/2" (14 cm) 

740895 RSD Ribbed T-Bar 27" (69 cm) 6" (15 cm) 4" (10 cm) 


Handlebars 

"ROLAND SANDS DESIGN" HANDLEBARS FOR 

TOURING MODELS 

Roland Sands initially designed these handlebars to allow installation 

on fairing equipped Touring models, but they will fit on numerous other 

applications as well.Available in black powder coated or with a chrome 

finish. Handlebars are slotted, knurled and drilled for internal wiring 

and stock or aftermarket hand controls. The stylish multi-hole drilled 

corner gussets offer strength and rigidity. Removable chrome billet end 

caps are included.Handlebars listed for 2008 to present Touring models 

are fully compatible with the Fly-By-Wire electronic throttle control. 

MINI APE CROSSBAR 

The RSD High rise mini ape with a stylized billet crossbar will take you 

back to your BMX days.These 1" diameter handlebars have heim joints 

on both ends of crossbar to give a mechanical look and allow the 

crossbar to be tightened until snug. Features knurling at 3 1/2" (89 mm) 

on center. 

751981 "Black OPS" Textured black 

751980 Gloss black with Contrast Cut Crossbar 


rise width back 

9" (23 cm) 34.4" (87 cm) 14 3/4" (37 cm) 6" (15 cm) 

740716 Glider, black, 1998 thru 2007 FLTR 

740717 Glider, chrome, 1998 thru 2007 FLTR 

740726 Glider, black, 2008 to present FLTR 

740727 Glider, chrome, 2008 to present FLTR 



9" (23 cm) 33" (84 cm) 7 3/4" (20 cm) 4" (10 cm) 

740718 Convoy, black, 1986 thru 2007 FLHT & FLHX 

740719 Convoy, chrome, 1986 thru 2007 FLHT & FLHX 

740724 Convoy, black, 2008 to present FLHT & FLHX 

740725 Convoy, chrome, 2008 to present FLHT & FLHX 



9" (23 cm) 33" (84 cm) 14" (36 cm) 5 3/4" (15 cm) 

740720 Lazyboy, black, 1986 thru 2007 FLHT & FLHX 

740721 Lazyboy, chrome, 1986 thru 2007 FLHT & FLHX 

740728 Lazyboy, black, 2008 to present FLHT & FLHX 

740729 Lazyboy, chrome, 2008 to present FLHT & FLHX 

ROLAND SANDS MOTO CROSSBAR 

Low rise aggressive motocross bend handlebar with a stylized billet 

crossbar. Features heim joints on both ends of the crossbar to add a 

mechanical look and allow the crossbar to be tightened until snug.The 

Crossbar is slotted and drilled for internal wiring and has knurling at 

3.5" (89mm) on center.Contrast Cut is a gloss black bar with a Contrast 

Cut Crossbar, Black Ops is a textured black bar with a Black Ops 

Crossbar. 


751982 Contrast Cut 




Handlebars 

"ROLAND SANDS DESIGN" FLAT OUT DRAG BARS 

Designed by Roland Sands for those with the full throttle syndrome.Bars 

are 1" in diameter to accept stock and aftermarket hand controls. 

Knurled, slotted and drilled for internal wiring.These drag bars feature 

TIG welded integrated risers that are bored 3 1/2" on center with 

1/2-13 UNC thread, which allows fitting on most stock Harley 

applications from 1974 to present. Matching billet aluminum risers 

that lift these bars with 2 1/4" are separately available in chrome or 

black powder coated. 



1 1/2" (3.8 cm) 32" (81 cm) - 4" (10 cm) 



Flat-Out 



740760 Flat out riser extensions, chrome 

740759 Flat out riser extensions, black 

RSD CLIP-ONS 

Roland Sands Design clip-on handlebars mount to the front fork below 

the top and lower triple clamps for a low handlebar position.They have 

a fixed 5 degree down angle and can be used with stock wiring, so no 

cutting or soldering is necessary.The aluminum bars are dimple milled 

to allow for stock wiring to cleanly exit your stock control switch 

housings. Bars are black anodized available with your choice of black, 

chrome, or Roland's unique black OPS finished fork clamps. Sold in sets 

of left and right. 

Fit all 39 mm front fork equipped 1988 to present FXR, 

Dyna and Sportster models 

740899 All black 

740905 Black and chrome 


Fit all 41 mm front fork equipped Touring, Softail and 

Dyna Wide Glide models 




Fit all 49 mm front fork equipped V-Rod and Dyna 

models 





Handlebars 

HANDLEBARS AND CONTROLS FOR OLD STYLE 

SPRINGER FORKS 

Steel old style handlebars for Springer forks.These handlebars are exact 

reproductions of the 1936 & 1946 OEM springer handlebars. 

Manufactured for internal throttle and ignition cables and are predrilled 

and tapped for stock style handlebar switches.Available in black 

powder coat or chrome finish. Handlebars come in 3 different models, 

"Speedster", "Standard", and "Buckhorn.The 1936 model handlebars 

will fit the stock style "in-line" Springer forks, as well as our Wide 

Springer, found elsewhere in this catalog. The 1946 handlebar will fit 

the stock style "off-set" Springer forks. 

"In line" handlebars 

Chrome Black 

720085 720045 Speedster, wide 34" (86 cm) 

720105 720100 Standard, wide 38" (97 cm) 

720087 720101 Buckhorn, wide 36" (92 cm) 

"Off-set" handlebars 

Chrome Black 

720103 720106 Speedster, wide 34" (86 cm) 

720102 720086 Standard, wide 38" (97 cm) 

720104 720088 Buckhorn, wide 36" (92 cm) 

Handlebar parts 

720046 Handlebar kit, includes 2 chrome spirals, plunger kits, 

nuts, bolts, cables and rubbers 

720047 2 Bolts, handlebar (OEM 6033-30 & 4636) 

720043 Rubber grip set, Old style, black (OEM 3311-35) (not 

shown) 

720049 Spiral, chrome push (OEM 3312-35C & 56245-35) 

720050 Spiral, chrome pull (OEM 3312-42) 

720051 Plunger only (OEM 3316-36 & 56270-36) 

720052 Pins, rollers, blocks, 2 sides (OEM 305-15, 3320-10, 

3321-31, 3316-36, 9281, 56278-10, 56281-31, 

56270-36) 

720053 Screw, wire fastening (OEM 3322-31 & 56283-31) 

720054 Inner cable, with end (OEM 3326-09 & 56373-09) 

720055 Inner and outer cable, throttle and ignition 

(OEM 3334-32 & 56502-32) 

720027 Lock plate, upper cone nut in-line army green 

(OEM 2759-36 & 46550-36) 

720028 Lock plate, upper cone nut chrome in-line 

(OEM 2759-36C & 46550-36C) 

720030 Lock plate, upper cone nut offset chrome 

(OEM 2759-46 & 46551-46C) 

720044 Nut, cone clamping chrome (OEM 2759-36AC & 

46561-36C) 




Handlebar Risers 

ONE-PIECE UPPER HANDLEBAR 

CLAMPS 

These one-piece upper handlebar clamps fit 

any Zodiac or OEM two-piece riser set on 

1974 to present models with 3 1/2" (89 mm) 

center-to-center risers with offset mounting 

holes, such as Sportster, Dyna, FX, FXR and 

FX Softail models. Does not fit FXLR, Softail 

Deuce, Softail Springer, 2007 to present 

FXSTC, 1996 to present Sportster Custom. 

Note: Handlebar clamps with built-in or bolton 

speedo or tacho can be found in Chapter 

19. 

Scalloped 

These unique styled chrome die-cast 

upper handlebar clamps are available with 

or without a skirt to fill the gap at the 

front of the risers. 

241189 Without skirt 

241191 With skirt 

Billet aluminum with bracket 

recess and control light holes 

Made by MW from solid billet aluminum 

with a high luster polished finish. Has a 

recess and threaded holes in the front to 

install MW's meter brackets as found in 

Chapter 19 of this catalog. Also features 

4 control light holes. 

710427 Handlebar clamp with meter 

bracket recess and control light 

holes 



Eagle Spirit 

Chrome die-cast upper handlebar clamp 

with Eagle Spirit logo in chrome or gold. 


241185 Gold/Chrome finish 

Live To Ride 

Chrome die-cast upper handlebar clamp 

with embossed "Live To Ride" logo. 

Available with or without a skirt to fill the 

front of the risers. 

241181 Without skirt 

241183 With skirt 

Smooth & Skirted 

Chrome die-cast upper handlebar clamp, 

features a skirt to fill the gap at the front 

of the risers. 

241167 Smooth & Skirted handlebar 

clamp 

Chrome with straightened front 

and control light holes 

Chrome plated billet aluminum. 

Availabkle with 4 or 5 control light holes 

241641 Chrome billet aluminum 

with 4 control light holes 


with 5 control light holes 

Billet aluminum with control light 

holes 


with a high luster polished finish. Has 

4 holes ready to take the control lights. 

710428 Billet aluminum with control 

light holes 

Billet aluminum with bracket 

recess 


with a high luster polished finish. Has a 

recess and threaded holes in the front to 

install MW's meter brackets as found in 

Chapter 19 of this catalog. 

710426 Handlebar clamp with meter 

bracket recess 



CHROME PLATED EARLY STYLE 

RISER CLAMPS 

Two-piece riser clamps will fit XLH883, 

883 Hugger, and XL1200S models, all FXD, 

FXDI, and FXDWG models, and FLSTC, FLSTF, 

FLSTN, FXST, FXSTB with 1" handlebars, as 

well as most risers with offset mounting 

holes. Early style riser clamps are available in 

smooth and grooved in your choice of chrome 

or black. 

Grooved 

241025 Chrome 

241725 Black 

Smooth 

241026 Chrome 

241726 Black 

FXWG STYLE "STRAIGHT" 

HANDLEBAR RISER SET 

Chrome plated replicas of the FXWG style 

risers with 41/2" (11.5 cm) rise. Can be used 

as OEM replacement or Custom applications. 

Use in combination with any of our showchromed 

handlebar clamps. Fits 1" 

handlebars, will also fit 7/8" handlebars if 

reducer sleeves are used (ZPN242000) 

(reducer sleeves not included) 

(OEM56063-82A). Use ZPN 233383 riser 

bolts. 

241164 Riser set straight FXWG 

6" PULL BACK RISER SET 

Inspired by the stock pull back style risers, but 

with their 6" (15 cm) they are just a little 

higher. They take all our upper handlebar 

clamps with 3 1/2" (89 mm) center-to-center 

risers and offset mounting holes, as well as 

our Early Style 2-piece top clamps ZPN 

241025 and 241026. Risers are sold in pairs 

and are threaded for 1/2"-13 UNC riser bolts. 

241624 Pull-back riser set, chrome 

241625 Pull-back riser set, black 


CHROME SHORTY HANDLEBAR 

RISERS 

Beautifully chrome-plated duplicates of the 

original parts.Available for all FL models from 

late 1970 thru 1984. Risers are 1.70" 

(4.30 cm) tall and fit under the handlebar 

cover. 

241266 Shorty riser FL 

(OEM 59940-79 & 59941-79) 

NOTE: 

ALL RISERS CAN BE USED 

FOR 7/8" (22 MM) 

HANDLEBARS IF REDUCER 

SLEEVES ZPN 24200 ARE 

USED. 

PULL BACK RISER SET 

Show-chromed die-cast riser set with 4 1/2" 

rise (11.5 cm). Replace stock risers on 

FXS/FXB models 1977 thru 1981, and 

FXST/FXSTC models 1984 to present. Can be 

used with stock upper clamp or any Zodiac 

clamp. Fits 1" handlebars, will also fit 7/8" 

handlebars if reducer sleeves are used (ZPN 

242000) Reducer sleeves not included). Use 

ZPN 233383 riser 

bolts (OEM 56066-82A). 

241144 Pull Back riser set 

CHROME FORGED ALUMINUM 

PULL BACK RISER SET 

Forged aluminum risers with a 4 1/2" 

(11.5 cm) rise. Legs are not round, as with 

the stock pull back style risers, but oval 

shaped. They take all our upper handlebar 

clamps with 3 1/2" (89 mm) center-to-center 

risers and offset mounting holes, as well as 

our Early Style 2-piece top clamps ZPN 

241025 and 241026.These risers are sold in 

pairs with a chrome or black anodize finish 

and are threaded for 1/2"-13 UNC riser bolts. 

241627 Chrome forged aluminum pull 

back riser set 

241628 Black forged aluminum pull 

back riser set 




CHROME BILLET ALUMINUM 

RISERS 

Stock style risers machined form solid billet 

aluminum with a show-chrome finish.These 

risers are available in 5 different heights and 

are sold in pairs. 

Use ZPN 233383 riser bolts 

241020 2" riser set 

241021 3 1/2" riser set 

241022 4 1/2" riser set 

241023 5 1/2" riser set 

241024 6 1/2" riser set 

CHROME HANDLEBAR RISER AND 

CLAMP SETS 

Show-chromed die-cast riser and clamp kits. 

Replace stock risers on XLmodels from 

1974 thru 1978, all Superglide models and 

FXR/FXRS 1982 to present.These kits feature 

four chrome sockethead mounting screws 

and rubber hole plugs.Also usable for many 

Custom applications.Available in a straight or 

a pullback version. Use ZPN 233383 riser 

bolts. 

241169 Pullback riser and clamp set 

plain 

241256 Straight riser and clamp set 

plain 

CHROME EURO STYLE RISER SET 

These chrome plated Euro-style risers feature 

a smooth looking squared design and 

grooved details. Risers are 4" high, give an 

extra 1" pull back on your handlebars and 

come complete with upper handlebar clamps 

and Allen head bolts. Sold in pairs. 

241528 Chrome Euro style riser set 



PHAT RISERS 

These risers are made of billet aluminum with 

show chromed finish. The fat look of these 

Phat risers is especially designed to match 

with the 1 1/4" thick Phat handlebars but 

they work with 1" handlebars too. These 

risers are 1 1/4" thick and can be used in 

combination with stock or any of our 

handlebar clamps. Sold in pairs. 

741327 Phat riser, 1 1/2" rise 

741328 Phat riser, 4 1/2" rise 

741329 Phat pull-back riser, 5 1/2" rise 

741330 Phat pull-back riser, 9" rise 

CHROME PULLBACK RISER FOR 

SOFTAIL MODELS 

Chrome 5" long pullback riser kit. This kit is 

inspired by the Softail Deuce model and will 

fit most 2000 to present Softail models with 

1" diameter handlebars. Provides more 

comfort to smaller riders. Does not fit Softail 

models equipped with Springer forks. 

Installation of higher risers may require 

replacement of longer brake line and control 

cables. 

241027 Pullback riser kit 

NOTE: 


FOR 7/8" (22 MM) 



USED. 

BILTWELL STAINLESS STEEL 

RISERS 

Biltwell's risers are 1 1/4" (32 mm) high and 

machined from solid Stainless Steel with a 

polished or black finish. Come complete with 

stainless Allen head bolts to hold the upper 

to the lower clamp. Sold in pairs. Drilled and 

tapped for 1/2" UNC riser bolts. 

751826 Polished 

751827 Black 

BILTWELL DOGBONE RISER TOP 

CLAMPS 

Biltwell's Dogbone style riser top clamps are, 

just like their risers, made from Stainless Steel 

and available with a polished or black finish. 

The use of a one-piece clamp is strongly 

recommended when handlebars with a wire 

hole between the risers are used, particularly 

in combination with rubber handlebar 

damper kits. 


751850 Black 



REBUFFINI TAU RISERS 

Rebuffini's Tau oval tapered risers show sleek 

looking lines as only Italians can create.Risers 

are CNC machined from solid billet aluminum 

with a polished, black anodized or chrome 

finish for use with 1" handlebars. Feature 

flawless looking caps to hide the handlebar 

clamp screws. Risers are 2 1/4" (5.5 cm) high 

and come complete with M12 allen head 

mounting screws with tapered sleeves. For 

those who want to change from the stock 

rubber handlebar mount to rigid mount a 

special rigid mount kit is available separately 

in black or polished. 

Polished Black Chrome 

746245 746246 746247 TAU riser 

set 

746330 746331 - TAU rigid 

mount kit 

REBUFFINI NAUS RISERS 

Rebuffini's Naus risers are made for use with 

1" handlebars. Risers are CNC machined 

from solid billet aluminum with a polished, 

black anodized or chrome finish.Feature caps 

to hide the handlebar clamp screws for an 

undisturbed appearance. Risers are 2" (5 cm) 

high and come complete with 1/2-13 x 

2-1/2" UNC mounting screws. 


746234 Black anodized 

746235 Chrome 

FAT BAR RISERS 

Fat Bar risers are beefy looking, 5" (12.5 cm) 

high billet aluminum in chrome or gloss black 

finish. They come complete with the upper 

clamps. For those who want an even fatter 

look, these risers are also available with a 

"dumbbell" style one-piece top clamp for 

3 1/2" (89 mm) center-to-center applications. 

Risers are available for regular 1" (25.4 mm) 

diameter handlebars, as well as for thru-out 

1 1/4" (32 mm) diameter handlebars. The 

1 1/4" version does not work with 1 1/4" 

handlebars with recessed mounts, such as 

our "Fat Bubba" and "Phat" bars,these work 

with the regular 1" version. Risers are sold 

in pairs and come complete with the 

necessary hardware. 

For 1" handlebars 

241594 Chrome with individual top 

clamps 

241590 Chrome with one-piece top 

clamp 

241595 Gloss Black with individual top 

clamps 

241592 Gloss Black with one-piece top 

clamp 

For 1 1/4" (32 mm) handlebars 

241593 Chrome with individual top 

clamps 

241589 Chrome with one-piece top 

clamp 

241596 Gloss Black with individual top 

clamps 

241591 Gloss Black with one-piece top 

clamp 

NOTE: 


FOR 7/8" (22 MM) 



USED. 

FUSION CHROME BILLET OVAL 

HEAD RISERS 

These Fusion risers with their symmetric oval 

heads feature handlebar top clamps that are 

secured from the underside, so clean looking, 

as there are no bolt heads in sight.Available 

in 2" (5.1 cm) thru 5" (12.7 cm) in 1" 

increments. They take almost any of our 1" 

handlebars as well as our Phat, Fat Bubba 

and Mucho-Fatzo bars. Risers are made from 

solid billet aluminum, than polished to 

perfection and finished with top quality show 

chrome. Three great looking designs to 

choose from, Smoothie, Lone Star or 

Crossblade design. Riser bolts are not 

included but must be ordered separately. 

Risers are 1/2"-13 UNC threaded for our ZPN 

233383 riser bolts. Risers are sold in pairs. 

Smoothie Design 

Chrome Black 

241060 241072 2" (5.1 cm) high 

241063 241075 3" (7.6 cm) high 

241066 241078 4" (10.2 cm) high 

241069 241081 5" (12.7 cm) high 

Lone Star Design 

Chorme Black 

241061 241073 2" (5.1 cm) high 

241064 241076 3" (7.6 cm) high 

241067 241079 4" (10.2 cm) high 

241070 241082 5" (12.7 cm) high 

Crossblade Design 

Chrome Black 

241062 241074 2" (5.1 cm) high 

241065 241077 3" (7.6 cm) high 

241068 241080 4" (10.2 cm) high 

241071 241083 5" (12.7 cm) high 







FUSION CHROME BILLET 

TAPERED OVAL HEAD RISERS 

These Fusion risers feature tapered oval heads 

inspired by classic design.The handlebar top 

clamps are smooth looking as they are bolted 

out of sight from the underside. Available in 

2" (5.1 cm) thru 5" (12.7 cm) in 1" 

increments. They take almost any of our 1" 

handlebars as well as our Phat,Fat Bubba and 

Mucho-Fatzo bars. Risers are made from solid 

billet aluminum, than polished to perfection 

and finished with top quality show chrome. 

Pick the style that matches your bike from the 

Smoothie, Lone Star or Crossblade design. 

Risers bolts are not included but must be 

ordered separately. Risers are 1/2"-13 UNC 

threaded for our ZPN 233383 riser bolts. 

Risers are sold in pairs. 

Smoothie design 

Chrome Black 

241085 241097 2" (5.1 cm) high 

241088 732000 3" (7.6 cm) high 

241091 732003 4" (10.2 cm) high 

241094 732006 5" (12.7 cm) high 

Lone Star Design 

Chrome Black 

241086 241098 2" (5.1 cm) high 

241089 732001 3" (7.6 cm) high 

241092 732004 4" (10.2 cm) high 

241095 241107 5" (12.7 cm) high 

Crossblade Design 

Chrome Black 

241087 241099 2" (5.1 cm) high 

241090 732002 3" (7.6 cm) high 

241093 732005 4" (10.2 cm) high 

241096 241108 5" (12.7 cm) high 

FUSION II BILLET "TAPERED OVAL 

HEAD" RISERS 

Just like our other Fusion risers these ones 

also feature tapered oval heads, inspired by 

classic design.The handlebar top clamps are 

smooth looking as they are bolted out of sight 

from the underside. The heads of the Fusion 

II risers however are 1 5/8" (41 mm) wide, 

where the Fusion I risers are only 1 3/8" 

(35 mm) wide. Available in 3" (7.5 cm) and 

5" (12.7 cm) height for use with 1" 

handlebars, as well as for 1 1/4" (32 mm) 

handlebars.The 1" diameter version also fits 

our Phat, Fat Bubba and Mucho-Fatzo bars. 

Risers are made from solid billet aluminum, 

than polished to perfection with a top quality 

show chrome or black anodized finish . Riser 

bolts are not included but must be ordered 

separately. Risers are 1/2"-13 UNC threaded 

for our ZPN 233383 riser bolts. Risers are sold 

in pairs. 

For 1" handlebars 

Chrome Black 

241045 241057 3" (7.5 cm) high 

241046 241058 5" (12.5 cm) high 

For 1 1/4" handlebars 

Chrome Black 

241043 241055 3" (7.5 cm) high 

241044 241056 5" (12.5 cm) high 

NOTE: 


FOR 7/8" (22 MM) 



USED. 

CUSTOM RISER SET FOR FXSTS 

MODELS 

This riser set, which was specifically designed 

for the Springer Softail, isolates the 

handlebars in rubber to minimize vibration, 

and raise them approximately 2" above stock 

position while moving them 2" closer to the 

rider. The set features beautiful chrome 

plating and comes complete with all required 

mounting hardware. Longer brake lines and 

control cables may be necessary when 

retaining the OEM Buckhorn handlebars. 

241187 Riser set 

REBUFFINI NAUS SPRINGER 

RISERS 

Rebuffini's Naus Springer risers are made for 

use with their Taurus billet aluminum top fork 

clamp to allow installation of 1" handlebars. 

Risers are CNC machined from solid billet 

aluminum with a polished, black anodized or 

chrome finish. They are 2" (5 cm) high and 

come complete with 1/2-13 x 1/2" UNC 

mounting screws. 



746250 Chrome 



DETONATOR HANDLEBAR RISERS 

Sleek looking chrome handlebar risers with a 

trick mounted domed top cover to keep the 

screws out of sight. Available in 4", 6" and 

8" high. Sold in pairs. 




BILLET ALUMINUM ROUND TOP 

RISERS 

Tapered style billet aluminum risers are a 

timeless design.They come complete with top 

covers and allen head top cover screws.They 

are sold in pairs, 2" (5.1 cm) high and 

threaded for use with 1/2-20 UNF riser bolts 

ZPN 233382. 


241029 Chrome 

BILLET ALUMINUM RISER SET 

Round top billet aluminum riser set.Available 

in both show chromed and polished finish. 

3 different lengths to choose from, 4" 

(10 cm), 6" (15 cm) and 8" (20 cm) rise. Fits 

1" handlebars however will fit 7/8" 

handlebars too, when reducer sleeves ZPN 

242000 are used. Risers are to be fitted with 

ZPN 233382 riser bolts. 

Chrome Polished 

241012 241015 Riser set 4" (10 cm) 

241013 241016 Riser set 6" (15 cm) 

241014 241017 Riser set 8" (20 cm) 

DETONATOR RISERS FOR 

SPRINGERS 

Detonator risers feature a trick mounted 

domed top cover to keep the screws out of 

sight. They have internal fitted 1/2-20 UNF 

allen head screws that bolt straight into the 

threaded top tree of 1988 to present Softail 

Springers. Risers are sold in sets of 2, have a 

show chrome finish and are available in 4" 

(10 cm) and 6" (15 cm). 

241515 Detonator Springer risers 4" 

(10 cm) 

241516 Detonator Springer risers 6" 

(15 cm) 

"HIDDEN MOUNT" FORGED 

ALUMINUM RISERS 

Chrome plated forged risers. These straight 

risers are available in five different lengths 

from 2" up to 10". A small but equally 

smooth cover hides clamping screws.Provide 

a sleek and powerful look. Sold in pairs 

241510 2" high 

241511 4" high 

241512 6" high 

241500 8" high 

241513 10" high 

NOTE: 


FOR 7/8" (22 MM) 



USED. 

LUCKY SEVEN RISERS 

The dice are back! These Lucky Seven risers 

are tastefully designed and give a distinct 

Custom look. They are machined from billet 

aluminum and have a polished finish. The 

handlebar top clamps feature hidden-mount 

hardware for that sleek look. Lucky Seven 

risers are available in 3" and 5" rise, and 

match perfectly with other Lucky Seven 

accessories found elsewhere in this catalog. 

741108 Lucky Seven risers 3" 

741109 Lucky Seven risers 5" 





KUSTOM TECH BILLET 

ALUMINUM ROUND RISERS 

These 1" round handlebar risers are 

machined from billet aluminum. Because of 

the unique design of the top clamp it 

eliminates all the hardware from sight giving 

it a very clean look.Available in 3" and 5" rise 

with polished or black anodized finish. 

741110 3" Polished 

741111 3" Black anodized 

741112 5" Polished 

741113 5" Black anodized 

"MAGNUM .38 POLICE SPECIAL" 

BILLET ALUMINUM RISERS BY 

RBS 

For those that want something really special. 

These Magnum Police Special risers are 

decorated with genuine Magnum cartridge 

cases. Risers are manufactured from solid 

billet aluminum and available in 2 1/4", 4" 

and 6" high. You can have the risers in 

chrome or black, but the cartridges stay the 

same.Matching handlebar grips,point covers, 

SuperTrapp end caps and gas cap covers for 

that real "Shooting" finishing touch can be 

found elsewhere in this catalog 

722260 Chrome 2 1/2" high riser set 

722261 Black 2 1/2" high riser set 

722262 Chrome 4" high riser set 

722263 Black 4" high riser set 

722264 Chrome 6" high riser set 

722265 Black 6" high riser set 

MW PAN AM BILLET RISERS 

These Pan Am risers are made from billet 

aluminum and have a mirror polished finish. 

They are only 2 3/8" (60 mm) high and are a 

perfect match with MW"s Digital Speedo 

clamps found elsewhere in this catalog. Fits 

most stock and stock style triple trees with 

OEM handlebar dampers. 

721879 MW Pan AM aluminum risers 


MW BILLET ALUMINUM RISERS 

These squared MW risers are CNC machined 

from solid blocks of billet aluminum and have 

a beautiful polished finish. They slightly pull 

back and give a rise of 2 3/8 " (60 mm). 

710399 Squared billet aluminum 2 3/8" 

high risers 


RBS RISER SETS 

CNC machined billet aluminum riser sets with 

a 2 5/16" rise. Come in three different 

finishes, polished, chrome and black 

anodized. Made for 1" handlebars.Will also 

fit 7/8" handlebars if reducer sleeves (ZPN 

242000) are used. Use ZPN 233383 riser 

bolts. 

700638 Riser set polished 

700639 Riser set chrome 

700640 Riser set black anodized 

CHROME SQUARED BILLET 

RISERS 

Stock length risers, made from solid billet 

aluminum with a show chrome finish. Sold in 

pairs. Must be installed with 1/2" UNC riser 

bolts (ZPN 233383) which must be ordered 

separately. Come complete with reduction 

sleeves for use with 5/8" (22 mm) 

handlebars. 

241018 Chrome billet riser set 

NOTE: 


FOR 7/8" (22 MM) 



USED. 



SOLID MOUNT HIDDEN WIRE 

BILLET ALUMINUM PULL BACK 

RISERS 

These billet aluminum solid mount "hidden 

wire" pull back risers are designed to keep 

the handle bar switch wires out of sight and 

give that true Custom look when used in 

combination with any of our 1" diameter 

hidden wire handlebars. Risers are fitted 

straight into the top triple tree without the 

use of the damper rubbers and come 

complete with all necessary hardware. Made 

in Germany from solid billet aluminum with 

a polished finish these risers are TÜV 

approved for the use on any motorcycle. 

Available in 2 3/8", 4 3/4" and 6 5/16" high. 

731590 2 3/8" (60 mm) high 

731591 4 3/4" (120 mm) high 

731592 6 5/16" (160 mm) high 

"ROLAND SANDS DESIGN" FLAT 

OUT RISERS 

Roland Sands initially designed these risers 

for use with his Flat-Out drag bars to allow 

installation of these bars on a Softail with 

stock gas tank, but found that these can also 

be used to offer extra lift to almost any kind 

of risers.These risers are CNC machined from 

billet aluminum, come with 1/2-13 UNC 

mounting hardware and are available in 

chrome or black powder coated.Sold in pairs. 

740760 Flat out riser extensions, 

chrome 

740759 Flat ouot riser extensions, black 

REBUFFINI NAUS HIDDEN WIRE 

RISERS 

Rebuffini's Naus "hidden wire" risers are 

designed to keep the handle bar switch wires 

out of sight and give that true Custom look 

when used in combination with any of our 

1" diameter hidden wire handlebars. Risers 

are fitted straight into the top triple tree 

without the use of the damper rubbers or with 

the stock damper rubbers in conjunction with 

the separately available reduction sleeve kit. 

Features caps to hide the handlebar clamp 

screws for an undisturbed appearance. 

Available in 2" (5 cm), 4" (10 cm) and 6" 

(15 cm) high with a polished, black anodized 

or chrome finish and supplied in pairs. 


746236 746237 746238 2" (5 cm) 

746239 746240 746241 4" (10 cm) 

746242 746243 746244 6" (15 cm) 

Reduction sleeve kits 



"ROLAND SANDS DESIGN" 

MOTO-X RISERS 

Roland created these risers inspired by 

motorcross styling.Risers are made from solid 

billet aluminum with a black anodized or 

chrome finish.They feature a laser engraved 

RSD logo on the top caps.Chrome pinch bolts 

are included. Risers are drilled and tapped for 

1/2-13 UNC riser bolts, such as ZPN 233383. 

Sold in pairs in 1 1/2" (38 mm), 3" (76 mm) 

and 5" (127 mm) high. 

740753 Black, 1 1/2" 

740754 Chrome, 1 1/2" 

740755 Black, 3" 

740756 Chrome, 3" 

740757 Black, 5" 

740758 Chrome, 5" 

BILLET ALUMINUM HANDLEBAR 

RISERS FOR USE WITH 1 1/2" 

HANDLEBARS 

Oval shaped, chrome plated billet aluminum 

handlebar risers for use with all 1 1/2" 

diameter handlebars, such as our Mucho- 

Fatzo. Sold in pairs. 

741321 Aluminum riser set for use with 

1 1/2" handlebars 

NOTE: 


FOR 7/8" (22 MM) 



USED. 







FUSION RISER & T-BAR 

EXTENSIONS 

These billet aluminum extensions are 

designed to increase the rise of our Fusion 

riser sets, as well as most T-Bar handlebars 

and risers that have a 1" or 1 1/4" bottom 

diameter.They feature a recess in the top to 

hold your risers or T-bars in exactly the right 

position and are available in straight or 

tapered style. Extended riser bolts must be 

ordered separately. Extensions are sold in 

sets of 2 with a chrome or black finish. 

Tapered design 

Chrome Black 

241759 241760 1/2" high for 1" 

risers or handlebars 

241762 241763 1" high for 1" risers 

or handlebars 

241765 241766 1 1/2" high for 1" 


241768 241769 1/2" high for 1 1/4" 


241771 241772 1" high for 1 1/4" 


241774 241775 1 1/2" high for 

1 1/4" risers or 

handlebars 

Straight design 

Chrome Black 

241777 241778 1/2" high for 1" 


241780 241781 1" high for 1" risers 

or handlebars 

241783 241784 1 1/2" high for 1" 


241786 241787 1/2" high for 1 1/4" 


241789 241790 1" high for 1 1/4" 


241792 241793 1 1/2" high for 

1 1/4" risers or 

handlebars 

Riser bolts (5-packs) 

742309 1/2x20x2 1/2" UNF for 1/2" 

extensions 

742311 1/2x20x3" UNF for 1" 

extensions 

742313 1/2x20x3 1/2" UNF for 1 1/2" 

extensions 

742288 1/2x13x2 1/2" UNC for 1/2" 

extensions 

742290 1/2x13x3" UNC for 1" 

extensions 

742292 1/2x13x3 1/2" UNC for 1 1/2" 

extensions 

CYCLE KRAFT SLOTTED RISER 

SETS 

Cycle Kraft slotted riser sets are CNC 

machined from solid aluminum by Ken's 

Factory.Available in 2" (5 cm), 4" (10 cm), 6" 

(15 cm) and 8" (20 cm) height in a polished 

finish or black anodized with clear cuts.They 

feature top end caps to keep the top 

mounting bolts out of sight and take ZPN 

233383 1/2-20x2" UNC riser bolts.Risers are 

sold in pairs. 

Black Polished 

747214 747215 2" (5 cm) 

747216 747219 4" (10 cm) 

747217 747220 6" (15 cm) 

747218 747221 8" (20 cm) 

NOTE: 


FOR 7/8" (22 MM) 



USED. 

CHOPS 76 RISERS 

Chops 76 offers a complete range of "Old 

School" motorcycle products, including these 

risers.All products are designed and made in 

Italy from top quality materials on CNC 

equipment, your guarantee for state-of-the 

art products that meet the highest quality 

standards.Make your choice from the Classic- 

, Cone-, Tower- and Shaved Line in a length 

that suits your custom or chopper project. 

Besides the wide variety of lengths and 

finishes, you also have the option to change 

the looks of your risers with one of the 

interchangeable top cover kits.Risers and top 

covers are sold in pairs. All risers are drilled 

and tapped for use with M12 riser bolts. 

Classic Line Risers 

Chrome Brass Black Height 

743360 743364 743368 2" (5.1 cm) 

743361 743365 743369 4" (10.2 cm) 

743362 743366 - 16" 

(15.2 cm) 

743363 743367 743371 8" (20.3 cm) 

Cone Line Risers 

Chrome Black Height 

743372 - 2" (5.1 cm) 

743373 - 4" (10.2 cm) 

743374 743377 6" (15.2 cm) 


Handlebar Risers/Handlebar Riser Mounts 

Tower Line Risers 


743378 743381 2" (5.1 cm) 

743379 743382 4" (10.2 cm) 

743380 743383 6" (15.2 cm) 

REDUCTION SLEEVES 

Reduces your 1" (25 mm) riser or lever 

assembly to 7/8" (22 mm). Specially knurled 

to prevent slipping. Sold and packed per 

4 pcs. 

242000 Reduction Sleeves 

HANDLEBAR DAMPER KIT 

Improved handlebar mounting kit, fits all 

models 1973 to present. Dampers are made 

from Heavy-Duty rubber, comes complete 

with heat-treated steel bushing and a choice 

of zinc plated or show-chromed top/bottom 

washers (OEM 56153-73). 

358254 With zinc plated washers 

358267 With chrome plated washers 

Shaved Line Risers 


743384 - 2" (5.1 cm) 

743385 743388 4" (10.2 cm) 

743386 743389 6" (15.2 cm) 

Interchangeable top covers 

Chrome Black 

743393 743390 Coned-line 

743394 743391 Shaved-line 

743395 743392 Tower-line 

SOLID-MOUNT HANDLEBAR KIT 

This solid damper set is specially designed for 

use with high bars and/or risers. Fits all Big 

Twin and Sportster models from 1973 to 

present with rubber handlebar bushings. 

Make the handling of your bike more positive. 

Made from Heavy-Duty nylon. 

358268 Solid-mount handlebar kit 

MACHINED NYLON HANDLEBAR 

DAMPER KIT 

Machined nylon handlebar dampers,ideal for 

use with extremely high handlebars and/or 

risers. Fits all models 1973 to present except 

FLT/FLH & Springer models. 

358277 Machined nylon handlebar 

damper kit 

HEAVY-DUTY POLYURETHANE 

HANDLEBAR DAMPER KIT 

Polyurethane handlebar dampers provide 

excellent vibration damping without the 

mushy feel of rubber dampers.This complete 

kit contains 2 upper and 2 lower dampers in 

your choice of red or black, 2 inner sleeves 

and 4 chrome washers. Fits most models 

1973 to present (OEM 56157-85T). 

358272 Red damper kit 

358273 Black damper kit 




Handlebar Riser Mounts/Handlebar Parts 

NESS POLYURETHANE 

HANDLEBAR DAMPER KITS FOR 

BAGGER MODELS 

• A must when installing Ape Hanger 

handlebars on a Bagger 

• Ness polyurethane bushings add more 

positive feel to the handlebars while limiting 

vibrations 

• Ness heavy-duty chrome cup washers will 

not bend or distort like factory units 

• Kits include polyurethane bushings, inner 

sleeves and heavy-duty chrome cup 

washers 

• Fits 1984 to present FLH and FLT series 

Touring models 

A08029 Ness handlebar damper kit for 

Baggers 

FLUSH MOUNT HANDLEBAR 

DAMPER KIT 

For extra clean looks of your handlebar 

mount.These chrome handlebar damper kits 

feature flush mounted 1/2-13 X 2 1/4" UNC 

Allen head bolts, black rubber bushings and 

chrome washers. Fits all Sportster and Big 

Twin models 1973 to present (except 

Springers). Sold in kits of 2. 

358112 Flush mount bushing kit 

CHROME PLATED FLUSH MOUNT 

RISER BOLT KITS 

Flush mount riser bolt, fit all stock 1973 to 

present and many aftermarket risers. Kits 

available for either 1/2"-13 UNC or 1/2"- 

20 UNF internal threaded risers. Kits include 

a pair of 2 1/2" long chrome plated Allen 

head bolts and chrome plated washers. Use 

in combination handlebar dampers kits ZPN 

358254, ZPN 358267, ZPN 358272 or ZPN 

358273. Handlebar dampers kits are sold 

separately. 

345004 Flush mount riser bolt kit 1/2"- 

13 UNC 

345005 Flush mount riser bolt kit 1/2"- 

20 UNF 



NESS FLUSH MOUNT 

POLYURETHANE HANDLEBAR 

BUSHING KITS WITH BUILT-IN 

RISE 

• Clean flush mount design 

• Beautifully polished 303 stainless steel 

custom washers 

• Soft polyurethane bushings absorb 

vibration 

• Available with fine or course Allen hardware 

• Fits 1973 and later FX, FXR, Softail and 

Dyna, as well as 1973 thru 2003 Sportster 

and most custom triple tree applications 

• The cleanest way to raise your handlebars 

an extra inch (2.5 cm) 

A08014 1" rise flush mount kit, fine 

thread applications 

A08018 1" rise flush mount kit, course 

thread applications 

TRANSPARANT HANDLEBAR 

DAMPER KIT 

This damper kit features a new one-piece 

chrome cap and insert design and transparent 

polyurethane dampers for a stiffer mounting 

than the stock rubber dampers.Fits all models 

1973 to present except FLT/FLH & Springer 

models 

358276 Transparent handlebar damper 

kit 

SOLID-MOUNT HANDLEBAR KITS 

These kits eliminate rubbermounted 

handlebars and fit either aluminum or steel 

fork crowns. Easy to install and highly 

recommended when installing high bars 

and/or risers. 

233486 Fits all Big Twin and Sportster 

models from 1973 to present 

with rubber handlebar bushings 

233487 Fits all Big Twin and Sportster 

models thru 1972 with steel 

press-fit bushings 

HANDLEBAR DAMPENER KITS 

WITH STUDS 

Handlebar dampener kits for late model Big 

Twins and Sportsters with threaded risers.Kits 

come complete with four rubber dampeners, 

two studs (1/2" x 13) and top and bottom 

washers. Fits FXR models 1984 thru 

1994 (except FXRT/FXRD), 

FXSB/FXEF/-FLST(C) 1985, FLSTF models 

1987 to present and Sportster models late 

1984 to present (OEM 56105-84 & 

56159-73 & 53156-86 & 56158-73). 

358087 Handlebar dampener kits with 

studs 

CHROME PLATED RISER BOLT 

233383 Riser bolt UNC 1/2"x2" 

233382 Riser bolt UNF 1/2" x 2" 


Handlebar Parts 

RISER ADAPTER STUDS FOR FXST 

SPRINGER MODELS 

These chrome plated riser adapter studs are 

designed for use on 1988 and later FXST 

Springer models, including 2008 and later 

Cross Bones. Feature 1/2-12 UNC thread on 

one side and 5/8-20 UNF thread on the other 

end. Can also be used on some aftermarket 

Springer front ends. Sold in pairs. 

241520 Springer riser adapter studs 

(OEM 4554-88) 

ZODIAC'S INTERNAL THROTTLE 

CONTROL 

This internal throttle control allows you to 

route the throttle cable inside the handlebars 

for those classic, naked looks as found on 

Flatheads and Liberators. It is an easy bolton 

construction in to your handlebar. Fits all 

1" diameter handlebars. Must be used with 

a left side OEM or aftermarket grip. 

052017 Internal throttle control 

TWISTGRIP STYLE INTERNAL 

CLUTCH CONTROL 

The internal throttle control is back again, in 

particular for customizers that want a clean 

looking handlebar.For those in search of even 

cleaner looks we now have a matching 

twistgrip style internal clutch control kit.You 

will have to cut your handlebar and drill and 

tap 3 holes to install. Works with Custom 

made clutch cables. The inner grip rolls on 

two needle bearings, whilst the plunger 

features a very small roller bearing,all in order 

to get a very smooth operation. Has 1" 

(25.4 mm) outer diameter and will accept 

stock size grips. 

052019 Twistgrip style internal clutch 

control kit 

KUSTOM TECH INTERNAL 

THROTTLE CONTROL 

You want that naked look and get rid of that 

big mess of cables dangling round your 

handlebar? Try this one, a smoothly designed 

internal throttle control that allows you to 

route the throttle cable inside the handlebars. 

Kustom Tech's internal throttle control is a 

steel construction with bronze and teflon 

internal components for a smooth action. 

Internal pull control can be used with all 

carburetor applications. Easy screw-on 

mounting, but for a very clean look you can 

also weld it to your handlebar. Must be used 

with a left side OEM or aftermarket grip. 

741107 Kustom Tech internal 

CHROME THROTTLE ASSY DUAL 

CABLE 

Chrome plated throttle assembly fits all 

1982 up models with dual cable.Includes grip 

set (OEM 56392-77 & 56395-81). 

052041 Chrome throttle assy dual cable 

CHROME THROTTLE ASSEMBLY 

SINGLE CABLE 

Show-chrome throttle assy fits FL/FLH 

1975-1980 and FX/XL 1974 thru 

1980 (OEM 56500-79). Single cable only. 

052039 Throttle assy with grip set 

052009 Throttle assy without grip set 

BILTWELL WHISKEY THROTTLE 

ASSEMBLY 

The Biltwell Whiskey throttle is constructed 

of CNC-machined 6061 T-6 aluminum and 

fits all 1" (25.4 mm) diameter handlebars. 

Two sets of four different cable ferrules are 

included with each full assembly.These plated 

steel ferrules fit both threaded and click-in 

barrel ends on stock Harley cables. If you 

don't run stock H-D cables on your 

motorcycle, the supplied ferrules provide 

plenty of options for custom single- or 

double-cable assembly. Like most Biltwell 

products, the Whiskey throttle should be 

installed by competent home mechanics or 

experienced professionals. Available with 

polished or black housing. Throttle sleeve is 

available separately as well. 

751846 Black 


751848 Replacement trhrottle sleeve 




Handlebar Parts/Grip Sets 

HANDLEBAR VIBRATION 

DAMPERS 

No matter what style of handlebar is chosen, 

they will vibrate. Sometimes on wide 

handlebars to the extent of being painfull. 

We have a simple and very economical 

solution: a set of our handlebar vibration 

dampers.These vibration dampers will reduce 

or neutralize these unpleasant vibrations. 

They are very easy to install, just remove your 

grips, slide them into the 

handlebar end, secure the bolt and install 

your grips again. Now you can enjoy a more 

comfortable ride. Fits almost any 1" diameter 

handlebar and are sold in pairs. 

735004 Handlebar vibration dampers 

"HOG-CRUISE" THROTTLE 

RETURN THUMBSCREW 

Cad plated, steel throttle return adjusting 

screw. Fits 1974 and later throttles as well as 

any Zodiac throttle. Thumb-wheel has 1" 

diameter which allows far easier adjustment 

and release with gloves on. Complete with 

spring and instructions. USA made. 

232317 Cruise control "HOG CRUISE" 

TWO CABLE THROTTLE SLEEVE 

WITH GRIPS 

Replacement throttle and grip set for all 

models with Push-Pull dual throttle cables 

1981 to present. Set contains throttle sleeve, 

left and right grip (OEM 56220-81B and 

5620681A). 

052028 Two cable throttle sleeve with 

grips 



NESS ROLLER THROTTLE 

BEARING 

• Turning your throttle has never been easier 

or smoother 

• Design allows your factory throttle sleeve 

to ride on a roller bearing instead of 

dragging on your handlebar 

• Cable style, fit all 1976 to present models 

with single throttle cable or dual 

throttle/idle cables, except models with 

handlebar air reservoirs 

Note: Requires cutting 1/2" (13 mm) from 

the right side of your handlebar 

A07099 Ness roller bearing throttle kit 

"JACKHAMMER" CHROME 

PLATED THROTTLE ASSEMBLY 

Universal throttle assembly for use with single 

cable carburetors.Available for 7/8" (22 mm) 

and 1" (25 mm) handlebars. All metal 

housing and twist grip with black rubber 

throttle sleeves. 

351200 Complete assembly 7/8" 

052020 Complete assembly 1" 

351203 Grip set only 

THROTTLE SLEEVES 

This is something you won't find in a Harley 

parts catalog. Throttle sleeves for use with 

single throttle cable as found on most models 

thru 1980, or, what is commonly known as 

"dual throttle" but in fact for throttle and 

return (idle) cable as found on most models 

1981 to present. 

052032 Sleeve for single throttle cable 

052030 Sleeve for dual throttle cable 

REPLACEMENT GRIP SET 

Replacement gripset for all Harley models 

1973 to present (OEM 56205-62A). 

052038 Replacement grip set 

SOFT TOUCH GRIP SET 

The finest on the market. Features embossed 

V-Twin Eagle emblem. The perfectly sized 

rubber sleeve is covered in neoprene rubber 

to absorb vibration and stop finger "Tingles". 

Fits all models 1973 to present (except with 

handlebar air reservoir). 

351434 Grip set with embossed V-Twin 

Eagle logo 


Grip Sets 

SUNDANCE SOFT TOUCH GRIP 

SET FOR HARLEY-DAVIDSON 

This grip set feature improved "close cell" 

grip rubbers which don't absorb water,oil etc. 

but still absorb vibration and stop finger 

"Tingles". Fits all Harley models 1973 up 

(except with handlebar air reservoir). 

351519 Sundance grip set with plain 

chrome end caps 

OLD SKOOL RUBBER GRIPS 

The design of these rubber hand grips with 

their chrome accent is inspired by the Old 

Skool look of the 1940's.Two styles available 

in order to match perfectly with the switch 

housings on your bike. Sold in pairs for left 

and right.Fit all V-Rod,Sportster and Big Twin 

models with single or dual cable operated 

throttle. 

351396 Fits with 1982 thru 1995 switch 

housings 

351394 Fits with 1996 to present style 

switch housings 

OLD SKOOL METAL FLAKE GRIP 

SETS 

These metal flake handlebar grips look good 

and stay good looking for many years 

because of modern materials. Old Skool 

chopper looks are available in 4 colors. Sold 

in sets of left and right. 

Note: Throttle sleeve not included, you may 

use your stock sleeve or order one separately. 

745300 Blue metal flake 

745301 Red metal flake 

745302 Clear metal flake 

745303 Black metal flake 


LEATHER SUNDANCE SOFT 

TOUCH GRIPS 

The Soft Touch rubber on these grips absorbs 

a lot of vibration and puts a hold to finger 

tingles and is also covered with genuine black 

leather. These grips have a larger outer 

diameter as most other grips on the market, 

which makes them ideal for the big handed. 

Throttle side fits on the stock plastic throttle 

sleeve. Grips feature chrome end caps and 

are sold in pairs. 

351081 Leather Sundance Soft Touch 

grip set 

THROTTLE PIPE AND GRIP SET 

Dual throttle cable pipes complete with grips 

and chrome-plated end caps. Fits all models 

from 1981 to present. 

052067 Throttle pipe and grip set 

BILTWELL KUNG-FU GRIPS 

The people at Biltwell Inc. believe motorcycle 

grips should be simple and comfortable.These 

BMX-inspired units are exactly that. Thick 

ends are durable, small flanges are attractive 

and a million little rubber fins are comfy.Grips 

are sold in pairs to fit all 1" (25.4 mm) 

diameter handlebars in your choice of black 

or natural rubber. 

751844 Black rubber 

751845 Natural brown rubber 



SOFT TOUCH GRIPS WITH FRINGE 

These additions to our extensive line of 

handlebar grips provide the same levels of 

comfort as our other soft touch grip sets, but 

with the added styling accent of chrome 

plated and fringed end caps. They fit all 

models from 1973 and later. 

351524 Soft Touch Grips with fringe 

CHROME PLATED FLAT BAND 

STYLE GRIP SETS 

CNC machined aluminum grip sets with 

rubber flat bands to absorb vibration and to 

stop "finger tingles". Fits all models 1972 to 

present with either single or dual cable 

throttle. 

351350 Flat band style grip set 



Grip Sets 



VINTAGE STYLE SOFT GRIPS 

Vintage style soft grip sets give your bike the 

real "Old School" look. Grips fit most OEM or 

aftermarket throttle housings and are 

available for dual cable (push/pull) or internal 

throttle. If a throttle housing or internal 

throttle control is needed, they must be 

ordered separately. 

351125 Black grips fit dual throttle 

housing 

351126 White grips fit dual throttle 

housing 

351127 Red grips fit dual throttle 

housing 

351128 Black grips fit internal throttle 

control 

351129 White grips fit internal throttle 

control 

351130 Red grips fit internal throttle 

control 

J.B. ISO STYLE HANDLEBAR GRIP 

SET 

High-tech aluminum grip set with dual cable 

factory throttle sleeve and flat thick rubber 

O-rings to absorb vibration and stop "finger 

tingles". Will accept both single or dual 

cables. Fits all Harley-Davidson models 

1972to present. Usable for Custom 

applications. 

351452 JB ISO style alu grip set with 

rubbers 

J.B. STYLE ALUMINUM GRIP SETS 

These grip sets are a perfect match with our 

line of J.B. style foot pegs and available for 

dual cable or single cable application. Sold in 

sets. 

351537 Fits single cable 

351535 Fits dual cable 

O-RING HANDLEBAR GRIP SET 

Custom style O-ring grip set, fits most makes 

and models with 7/8" or 1" handlebar.A real 

show item, has chrome finish. 

351347 Fits 7/8" handlebars/ throttles 

351525 Fits 1" handlebars/throttles 

STREAMLINER GRIP SET 

Another addition to our extensive line of grip 

sets. These Streamliner grip sets feature a 

thick one piece rubber inside to absorb 

vibration and are covered by a sleeved 

chrome plated cover to add a touch of beauty. 

Grip sets are available for 7/8" and 1" 

controls (22 and 25 mm). 

351445 Fits 1" handlebars 

351447 Fits 7/8" handlebars 

STREAMLINER II GRIP SET FOR 

1996 TO PRESENT MODELS 

Updated version of our popular Streamliner 

grip set. As with the OEM grips, the left side 

grip is secured inside the handlebar switch 

housing. The right side grip comes with the 

nylon throttle sleeve installed. Fits all 1996 to 

present models. Sold in pairs. 

351324 Streamliner II grip set 

GLADIATOR GRIP SET 

Machined from billet aluminum with a 

chrome finish.The rubber wrapping provides 

a non-slip surface and a more comfortable 

ride. Fits all 1973 to present models with 

single or dual cables, except those with 

handlebar air reservoir. 

351135 Gladiator grip set 

EAGLE'S HEAD HANDLEBAR GRIP 

SET 

Another addition to our extensive line of grip 

sets. These grip sets feature a one piece 

rubber in combination with a sleeved chrome 

plated cover with the addition of an Eagle's 

Head at the end caps. Fits 1" handlebars. 

310214 Eagle's Head grip set 


Grip Sets 

SWIRL STYLE GRIP SET 

This Swirl style grip set features a thick one 

piece rubber inside to absorb vibrations and 

are covered by a grooved chrome plated cover 

to add a touch of beauty. Comes with the 

nylon sleeve for single or dual cable 

applications already installed. Fits all models 

1973 to present (except models with 

handlebar air reservoir). 

351116 Swirl style grip set 

TORNADO II GRIP SET 

Tornado II handlebar grips are a design version of the popular Tornado grips. Like the Tornado 

grips,these are machined from billet aluminum with a chrome finish.They feature rubber wrapping 

with protruding stars, crosses or checkers that provide extra comfort and a non-slip grip.The end 

caps feature the same star or cross design, or are smooth. Available for all 1973 to present 

models with single or dual throttle cables,except those with handlebar air reservoir.Also available 

for 2008 to present Touring models with "fly-by-wire" throttle control. Matching Tornado II 

footrests, shifter pegs and brake pegs can be found in Chapter 13. 

TORNADO GRIP SET 

Machined from billet aluminum with a 

chrome finish.The rubber wrapping provides 

a non-slip surface and a more comfortable 

ride. Fits all 1973 to present models, except 

those with handlebar air reservoir. 

351120 Chrome / rubber CNC Tornado 

grip set 

DIAMOND GRIP SET 

In addition to our range of our Diamond foot 

pegs, we also offer this grip set in the same 

design for the finishing touch. Features thick 

one piece rubbers inside to absorb vibrations 

and brightly chromed sleeves. 

351528 Diamond grips 

Fits 1973 to present cable operated models 

351810 Chrome, Four Cross Design with black rubbers 

351811 Black, Four Cross Design with black rubbers 

351800 Chrome, Lone Star Design with black rubbers 

351801 Black, Lone Star Design with black rubbers 

351820 Chrome, Smooth Design with black rubbers 

351821 Black, Smooth Design with black rubbers 

351112 Bronze, Smooth Design with black rubbers 

351942 Chrome,Turbo Design with black rubbers 

351982 Chrome,Turbo Design with grey rubbers 

351943 Black,Turbo Design with black rubbers 

351983 Black,Turbo Design with grey rubbers 

351944 Bronze,Turbo Design with black rubbers 

351984 Bronze,Turbo Design with grey rubbers 

Fits 2008 to present Touring models with "fly-by-wire" throttle control 

351812 Chrome, Four Cross Design with black rubbers 

351813 Black, Four Cross Design with black rubbers 

351802 Chrome, Lone Star Design with black rubbers 

351803 Black, Lone Star Design with black rubbers 

351822 Chrome, Smooth Design with black rubbers 

351823 Black, Smooth Design with black rubbers 

351113 Bronzed, Smooth Design with black rubbers 

351946 Chrome,Turbo Design with black rubbers 

351986 Chrome,Turbo Design with grey rubbers 

351947 Black,Turbo Design with black rubbers 

351987 Black,Turbo Design with grey rubbers 

351948 Bronze,Turbo Design with black rubbers 

351988 Bronze,Turbo Design with grey rubbers 




Grip Sets 



RUBBER GRIPS WITH CHROME 

FLAMES 

The rubber on these awesome looking grips 

protrude through the chrome flames to give 

a very good grip. Available to fit all 1973 to 

present Harleys with single or dual cable 

operated throttle, except those with 

handlebar air reservoirs. Also available for 

2008 and later "Fly-By-Wire" equipped 

Touring models. Sold in pairs. 

351079 Fits all 1973 to present models 

with cable operated throttle 

351080 Fits all 2008 to present Touring 

models and other "Fly-By- 

Wire" equipped models 

RETRO STYLE KNURLED BILLET 

ALUMINUM GRIP SETS 

The "Retro" design originates from the drag 

race strip where drivers need all grip they can 

get,both on the tarmac as well on handlebars 

and foot pegs. Matching foot,- brake,- and 

shifter pegs can be found in Chapter 13. 

"Retro" grips fit all Harley models with single 

or dual throttle cable from 1973 to present, 

except those with handlebar air reservoirs. 

Available in plain aluminum, chrome, bronze 

anodized or black anodized with clear 

highlights. 

353000 Bronze 

353003 Black with clear aluminum 

highlights 

353006 Chrome 

353009 Plain aluminum 

LION'S HEAD HANDLEBAR GRIP 

SET 

Beauty and comfort are joined together in 

these grips.The thick one piece rubber inside 

the grips absorbs the vibrations and the 

beautifully chromed sleeved cover features a 

Lion's Head at the end cap for that touch of 

class. Grips fit 1" handlebars. 

310215 Lion's Head grip set 

INLAY MILLENNIUM GRIP SET 

Fat looking and sensational feeling grips for 

your Harley. Features a one-piece rubber 

insert that protrudes through the chrome 

plated housing to absorb vibration. The 

throttle side grip comes with the nylon sleeve 

for single or dual cable application allready 

installed. Fits all models 1973 to present 

(except models with handlebar air reservoir). 

351114 Inlay Millennium grip set 

PRO-ONE "MILLENNIUM" BILLET 

GRIPS 

Pro-One's "Millennium" billet grips feature 

a hot design. Made from chrome plated billet 

aluminum,they fit all models 1982 to present 

except those with air reservoir in handlebar. 

Sold in pairs. 

710886 Millennium billet grips 

SPEEDLINE GRIP SET 

This grip set is an updated version of our very 

popular Streamliner grip set. Like the 

Streamliner set they also feature a thick one 

piece rubber inside and are covered by a 

sleeved chrome plated cover.We have added 

the grooved end caps for extra class.This grip 

set really adds something special to your bike. 

Fits 1" handlebars. 

351451 Speedline grooved grip set 

SPEEDLINE II GRIP SETS 

Sleek looking grip sets that fit all models 

1973 to present with single or dual cable 

operated throttle (except models with 

handlebar air reservoir). These grips have 

rubber inlays that protrude trhrough the 

chrome plated housing to absorb vibrations. 

Available with 6 rail "wide band" rubber 

inserts or 8 rail "narrow band" inserts. 

351215 With 6 railed wide band inserts 

351216 With 8 railed narrow band 

inserts 

REVOLUTION BILLET ALUMINUM 

GRIP SET 

High-tech billet aluminum grip set with 

knurled pattern. Not only looks great but also 

provides a non-slip surface. Fits all models 

Harley-Davidson 1973 to present. In 

combination with ZPN 052041 or 

052009 usable for many Custom applications 

on 1" handlebars. 

235899 Billet aluminium grip set 


Grip Sets 

NESS SOFT TOUCH BILLET GRIPS 

• These premium hand grips look and feel 

great 

• Made in the USA from the finest materials 

such as Kraton rubber and billet aluminum 

collars and end caps 

• Throttle sleeve included 

• Cable style grips fit all 1976 to present 

models with single throttle cable or dual 



• Throttle-by-wire style grips fit 2008 to 

present FLH and FLT series Touring models 

Scalloped Dimpled Rubber, 

chrome 

A07082 Cable style 

A07083 Throttle-by-wire 

Engraved, Dimpled Rubber, black 



Scalloped Knurled, chrome 



Scalloped Knurled, black 



Scalloped Dimpled Rubber, black 



Engraved, Dimpled Rubber, 

chrome 



Smooth, Dimpled Rubber, chrome 



Smooth, Dimpled Rubber, black 






Grip Sets 

ARLEN NESS BILLET GRIPS 

• Arlen Ness was the first billet grip 

manufacturer on the motorcycle industry 

• Cable style grips feature Ness exclusive 

internal roller bearing that eliminates any 

free play for smooth throttle operation 







Cable Type cutaway 

Throttle-by-wire cutaway 

Diamond Flatband, chrome 



A07112 Replacement rubbers 

Flamed, black 

A07142 Cable style 


Rocket, chrome 




Knurled Flare Tip, chrome 





Deep Cut, chrome 



Deep Cut, black 



Diamond Twist, chrome 


Retro, chrome 




Flamed, chrome 



Twister, chrome 


Grooved, black 



Grip Sets 

Grooved, chrome 


Battistini Oval, black 



Knurled, chrome 



Battistini Round, black 



NESS ALTERNATIVE BILLET GRIPS 

• Machined from 6061-T6 billet aluminum 

and chrome plated 







Torpedo, chrome 


Battistini Oval, chrome 



Battistini Round, chrome 



Ten-Band, chrome 



Flatband, chrome 



NESS GRIP WING 

• Design adds support to the palm of your 

hand 

• Can be used on throttle and clutch side 

• Increases leverage when used on the 

throttle side 

• Chrome finish 

• Installs in minutes 

A07200 Ness Grip Wing 

Horizontal, chrome 






Grip Sets 


ARLEN NESS FUSION GRIPS 

•The perfect fusion of grip, style and comfort 

•Each rubber grip design features excellent 

traction for your hands to take full control of 

your motorcycle 

•Billet aluminum accents are finished in high 

luster chrome or black anodizing 

•Deep Cut, Port Hole and Smoothie designs 

feature 1 1/4" billet aluminum inner collars, 

diamond knurled rubber grips and billet 

aluminum end caps 

•Slot Track design features 1 1/4" billet 

aluminum inner collars with an air cushion 

rubber thumb pad,linear knurled rubber grips 

and slotted billet aluminum end caps 

•Diamond Knurled Rubber design features 

diamond knurled grips with integrated billet 

end caps for a clean design 

•Ring Leader design features a linear knurled 

rubber grip with integrated air pillows for 

comfort. Collars, rings and end caps are 

machined from billet aluminum 

•All kits include an installed throttle sleeve, 

grip glue and simple to follow instructions 

•Part numbers indicated as "cable" fit all 

models with single throttle or dual throttle 

and idle cable, except those with handlebar 

mounted air reservoirs 

•Part numbers indicated as "Fly-By-Wire" fit 

all 2008 to present FLH and FLT series Touring 

models and selected CVO models 

•Matching foot pegs and shifter pegs can be 

found in Chapter 13 

A07305 Port Hole, black, cable 

A07307 Port Hole, black, Fly-By-Wire 

A07312 Ring Leader, chrome, cable 

A07313 Ring Leader, black, cable 

A07314 Ring Leader, chrome, Fly-By- 

Wire 

A07315 Ring Leader, black, Fly-By-Wire 

A07324 Knurled, chrome, cable 

A07325 Knurled, black, cable 

A07326 Knurled, chrome, Fly-By-Wire 

A07327 Knurled, black, Fly-By-Wire 

A07320 Smoothie, chrome, cable 

A07321 Smoothie, black, cable 

A07322 Smoothie, chrome, Fly-By-Wire 

A07323 Smoothie, black, Fly-By-Wire 


A07300 Slot Track, chrome, cable 

A07301 Slot Track, black, cable 

A07302 Slot Track, chrome, Fly-By-Wire 

A07303 Slot Track, black, Fly-By-Wire 

A07316 Deep Cut, chrome, cable 

A07317 Deep Cut, black, cable 

A07318 Deep Cut, chrome, Fly-By-Wire 

A07319 Deep Cut, black, Fly-By-Wire 


Grip Sets 

CYCLE KRAFT GRIP SETS 

Cycle Kraft grip sets are CNC machined by 

Ken's Factory from billet aluminum and 

available in three designs in a polished finish 

or black anodized with clear cuts. Fits most 

Harley models 1976 to present with single 

throttle cable or combined throttle and idle 

cables. 

747200 Spiral, polished 

747204 Spiral, black anodized with 

clear cuts 

747201 Dimpled, polished 

747203 Dimpled, black anodized with 

clear cuts 

747202 Ribbed, polished 

747205 Ribbed, black anodized with 

clear cuts 

CYCLE KRAFT 

NEO FUSION GRIP SETS 

Cycle Kraft Neo Fusion grip sets are CNC 

machined by Ken's Factory from billet 

aluminum and have a larger outer diameter 

as most other grips on the market.Available 

in two designs, in a polished finish or black 

anodized with clear cuts.All versions feature 

brass end caps. Available for most Harley 

models 1976 to present with single throttle 

cable or combined throttle and idle cables, 

as well as for 2008 "throttle by wire" Touring 

models 2008 to present. 

Classic 

747207 Cable style, polished 

747211 Throttle By Wire, polished 

747206 Cable style, black anodized with 

clear cuts 

747210 Throttle By Wire, black anodized 

with clear cuts 

Spiral 

747209 Cable style, polished 

747213 Throttle By Wire, polished 

747208 Cable style, black anodized with 

clear cuts 

747212 Throttle By Wire, black anodized 

with clear cuts 

PM CONTOUR RENTHAL 

WRAPPED GRIPS 

Most people tend to overlook the grips used 

on their motorbike.But they can be a real eyecatcher, 

especially if they are as beautiful as 

the Contour series by Performance Machine. 

The rubber wrapping absorbs engine 

vibrations and provides you with a more 

secure grip particularly in bad weather 

conditions. A perfect fit when matched with 

the PM Contour handlebar controls found 

elsewhere in this catalog. 

723199 PM Contour renthal wrapped 

grips, chrome 

724199 PM Contour renthal 

wrapped grips, black 




Grip Sets 

CHROME ALUMINUM BARREL 

STYLE GRIPS 

Barrel style grips with deep grooves look 

good and provide a lot of grip. Fits all 1973 to 



handlebar air reservoirs.Also does not work 

on 2008 and later "Fly-By-Wire" equipped 

Touring models. CNC machined aluminum 

with a top of the bill chrome finish. 

351422 Chrome aluminum barrel style 

grip set 

CHROME BILLET MIAMI GRIPS 

Miami grips are a spectacular looking yet 

ergonomically design, CNC machined from 

solid billet aluminum with a chrome finish. 

Grips have knurled parts for a firm handgrip. 

Fits all Harley models 1976 to present, except 

those with handlebar air reservoirs nor 

2008 and later FLH and FLT series models. 

Sold in pairs. 

351414 Chrome billet Miami grip set 

CHROME BILLET ROCKET STYLE 

GRIPS 

Rocket style grips machined from billet 

aluminum, mirror shine polished and showchrome 

finish. Fits all models from 1982 to 

present (except those with handlebar air 

reservoir). 

361130 Chrome billet Rocket Style grip 

set 



CHROME ALUMINUM V-GROOVE 

GRIPS 

The deep V-shaped grooves in these grips not 

only look good, they also provide a very good 

grip. Fits all 1973 to present Harleys with 

single or dual cable operated throttle, except 

those with handlebar air reservoirs.Also does 

not work on 2008 and later "Fly-By-Wire" 

equipped Touring models. CNC machined 

aluminum with a perfect chrome finish. 

351424 Chrome aluminum barrel style 

grip set 

MAGNUM GRIP SETS 

Magnum grips are machined from billet 

aluminum and than chrome plated or black 

anodized. They feature rubber bands that 

provide extra comfort and a non-slip grip to 

your gloves. They are available for use with 

single throttle or throttle/idle cable 

combinations, but won't fit models with 

handlebar mounted air reservoirs. A version 

for "Fly-By-Wire" models, such as 2008 to 

present Touring models and 2011 to present 

Softail CVO models also available. 

Magnum grip sets for cable 

applications 

351920 Chrome 


Magnum grip sets for "Fly-By- 

Wire" applications 

351928 Chrome 


CHOPS 76 GRIP SETS 

Chops 76 grips are designed and made in 

Italy.They are CNC machined from solid billet 

aluminum or pure solid brass.Billet aluminum 

grips come in chrome or black anodized, with 

or without highlighted accents.The pure solid 

brass version has a high luster polished finish. 

Grips are sold in pairs. Throttle sleeve is not 

included. You can re-use the one from your 

stock grips, but it might be a pain to remove 

it. New ones are available from Zodiac (ZPN 

052028). Grips are not suitable for models 

with handlebar air reservoirs or 2008 to 

present Touring models. 


743425 Black anodized billet aluminum 

743426 Black anodized and highlighted 

billet aluminum 

743427 Polished brass 




Grip Sets 

PAUL YAFFE'S BAGGER NATION 

BULLET GRIPS 

Paul Yaffe's exclusive urethane compound 

brings unparalleled pleasure to your ride. 

Perfect fit,perfect length,perfect feel.Feature 

removable end caps that make your 

handlebars a really cool place to stash your 

registration or whatever you feel like hiding. 

Handlebar grips fit all models with cable 

operated throttle 1982 to present, except 

those with handlebar air reservoirs. Matching 

Bullet foot pegs and shifter pegs are also 

available. 

745015 Bullet rubber handlebar grips, 

fit all models with cable 

operated throttle 1982 to 

present, except those with 

handlebar air reservoirs. 

745016 Bullet male mount rubber pegs 

745017 Bullet shifter peg 


ALI-BABA GRIPS 

Paul Yaffe's exclusive urethane compound 

brings unparalleled pleasure to your ride. 

Perfect fit, perfect length, perfect feel. Ali- 

Baba handlebar grips feature removable end 

caps that make your handlebars a really cool 

place to stash your registration or whatever 

you feel like hiding. Handlebar grips fit all 

models with cable operated throttle 1982 to 

present, except those with handlebar air 

reservoirs. Matching Ali-Baba foot pegs and 

shifter pegs are also available. 

745018 Ali-Baba rubber handlebar 

grips, fit all models with cable 




745019 Ali-Baba male mount rubber 

pegs 

745020 Ali-Baba shifter peg 

REBUFFINI GRIP SETS 

These billet aluminum grip sets feature rubber 

inlays to provide a good grip and reduce 

vibrations. Work with Rebuffini, stock, and 

stock style throttle housings.Cable style grips 

are designed for throttle and idle cables as 

used on most 1982 to present models, the 

"Fly-By-Wire" style is for use on 2008 to 

present Touring models. Two designs 

available.The Delta style grips in black feature 

the Rebuffini Cycles script on the end. 


CLASSIC GRIPS 

Paul Yaffe's exclusive top-secret urethane 

compound brings unparalleled pleasure to 

your ride. Perfect fit, perfect length, perfect 

feel. Feature removable end caps that make 

your handlebars a really cool place to stash 

your registration or whatever you feel like 

hiding. Handlebar grips fit all models with 

cable operated throttle 1982 to present, 

except those with handlebar air reservoirs. 

Matching Classic foot pegs and shifter pegs 

are also available. 

745021 Classic rubber handlebar grips, 

fit all models with cable 




745022 Classic male mount rubber pegs 

745023 Classic shifter peg Delta design 

Cable style Fly By Wire style 

746228 746762 Polished 

746229 746763 Black 

746230 746764 Chrome 

Omega design 

Cable style Fly By Wire style 

746225 746765 Polished 

746226 746766 Black 

746227 746767 Chrome 




Grip Sets 



RSD TRACKER GRIPS 

Roland Sands Design grips are CNC machined 

from solid billet aluminum or brass.They are 

wrapped with genuine Renthal rubber to 

ensure that your hand never slips off no 

matter how hard you twist the throttle. 

Feature Speed Dots and a RSD laser engraved 

logo.Available in chrome, Contrast Cut black, 

"Black-OPS"; Roland Sands' top-secret 

proprietary two-tone black finish, or pure 

brass. 

Fits all 1982 to present models 

with single or dual throttle cables 

740700 Contrast Cut black 

740701 Chrome 


740892 Brass 

Fits 2008 to present Touring 

models with Fly By Wire electronic 

throttle control 

740702 Contrast Cust black 

740703 Chrome 


740893 Brass 

RSD CHRONO GRIPS 

Time is on your side with the RSD Chrono line. 

Inspired by unique time pieces, the Chrono 

line offers a high level of detailing and design. 

They are CNC machined from billet aluminum 

and feature Renthal rubber grips and material 

interchangeable black & brass RSD badges 

with a laser engraved logo. 

Fits all Harley models with dual or 

single throttle cable, except those 

with handlebar air reservoirs 



751966 Chrome 

751971 Brass 

Fits all FLH and FLT series Touring 

and other models with "Fly-By- 

Wire" throttle control 



751969 Chrome 

751972 Brass 

CHROME GROOVED GRIP SETS 

Machined from solid billet aluminum with ball 

milled grooves and a perfect chrome finish. 

Fits all models with single or dual throttle 

cables from 1982 to present, except those 

with air reservoir in the handlebars. 

351471 Chrome billet grooved grip set 

KUSTOM TECH SUPER SMOOTH 

GRIPS 

Super Smooth grips provide that Super Sleek 

looks to your bike. Machined by Kustom Tech 

from billet aluminum. Available with ball or 

acorn end in polished or black anodized 

finish. Fits all models 1982 to present, except 

those with ar reservoir in the handlebars. 

Note: Not for use with Kustom Tech internal 

throttle housing. 

741124 Super smooth grips, ball end 

polished 

741125 Super smooth grips, ball end 

black anodized 

741126 Super smooth grips, acorn end 

polished 

741127 Super smooth grips, acorn end 

black anodized 


Grip Sets 

KUSTOM TECH HANDLEBAR 

SMOOTH GRIPS 

A very nice looking set of grip it is. Made from 

billet aluminum, fits all models with single or 

dual cables (except air forks). Choose from 

polished or black finish. 



741120 Smooth grip ball end polish 

741121 Smooth grip ball end black 

anodized 

741122 Smooth acorn end polished 

741123 Smooth grip acorn end black 

anodized 

KUSTOM TECH VINTAGE 

HANDLEBAR GRIPS 

Made in Italy by Kustom Tech. Machined from 

billet aluminum and solid brass. A perfect 

match with Kustom Tech's DeLuxe handlebar 

controls, but also works with stock and most 

aftermarket throttle housings. Fits all 1976 to 

present Harley-Davidson models with 1" 

handlebars and single throttle cable, or dual 

throttle-and-idle cable. Does not fit models 

with handlebar mounted air reservoirs. 

751190 Polished aluminum with 

polished brass accents 

751191 Black coated aluminum with 

polished brass accents 

"THE FACTORY" CAST BRASS OR 

ALUMINUM HANDLEBAR GRIPS 

Hand cast by "The Factory" these solid brass 

or solid aluminum handlebar grips fit all 

1973 to present models with single or dual 

cable operated throttle, except those with 

handlebar air reservoirs. Great classic looks, 

certainly in combination with other 

traditionally cast covers from "The Factory" 

found elsewhere in this catalog.Must be used 

with a throttle sleeve (sold separately). 

735462 "The Factory" cast brass 

handlebar grip set 

735489 "The Factory" cast 

aluminum handlebar grip set 




KUSTOM TECH BILLET 

ALUMINUM CHOPPER GRIPS 

Kustom Tech's handlebar grips fit all models 

from 1982 to present, except those with an 

air reservoir in the handlebar.These grips are 

CNC machined from solid billet aluminum 

and come with Ball End, or Acorn End design. 

Both versions can be ordered with polished 

or black anodized finish. 



741116 Ball-end style, polished 

741117 Ball-end style, black anodized 

741118 Acorn end style, polished 

741119 Acorn end style, black anodized 

FABRIC TAPE HANDLEBAR GRIPS 

Nostalgic looking handlebar grips covered 

with fabric tape. Made from billet aluminum 

featuring a polished finish and come with 

polished brass end caps. Fits most single and 

dual cable applications. Sold in sets of left 

and right. 

751192 Kustom Tech fabric tape 

handlebar grip set 

"MAGNUM .38 POLICE SPECIAL" 

BILLET ALUMINUM GRIP SETS BY 

RBS 

For those that want something really special. 

These Magnum Police Special grip sets are 

decorated with genuine Magnum cartridge 

cases. Grips are manufactured from billet 

aluminum and will fit all models 1982 to 

present except those with fork air reservoirs 

in the handlebar.You can have the grip set in 

chrome or black, but the cartridges stay the 

same. Matching handlebar risers, point 

covers, end caps for SuperTrapp and gas cap 

covers for that real "Shooting" finishing 

touch can be found elsewhere in this catalog. 

722272 Polished .38 Special grip set 

722273 Black .38 Special grip set 



Grip Sets 

RBS BILLET HANDLEBAR GRIP 

SETS 

RBS "Flowing Wave" handlebar grip sets are 

machined out of billet aluminum. Fit all 

models 1973 to present with single or dual 

throttle cables.A perfect match with RBS foot 

and shifter pegs. 

700620 Polished finish 

700621 Black anodized finish 

V-Style grip set with LED turn 

signals 

722489 Polished aluminum 

722490 Chrome plated 

722491 Black coated 

Twister-style grip set with LED 

turn signals 




RBS GRIP SET FOR USE WITH 

KELLERMANN TURNSIGNALS 

Manufactured from billet aluminum. Four 

designs available in chrome plated, polished, 

or black finish. Grips feature open ends to 

accommodate for Kellermann handlebar 

mounted turn signals found elsewhere in this 

catalog (turn signals not included). 

Standard Style 


722474 Chrome 

722475 Black 



RBS GRIPSETS WITH 

TURNSIGNALS 

Manufactured by RBS from billet aluminum. 

These stylish handlebar grips feature state of 

the art bright shining "Built-In" turn signals 

with LED lights. Fits all models 1973 to 

present except those with handlebar air 

reservoirs. They come in four different styles 

and are available in polished aluminum, 

chrome plated or black coated. 

Standard grip set with LED turn 

signals 




Grooved-style grip set with LED 

turn signals 




V-Style 


722477 Chrome 

722478 Black 

Twister Style 


722498 Chrome 

722499 Black 

Grooved Style 


722501 Chrome 

722502 Black 


Grip Sets/Hand Shifter Ornaments 

RBS BILLET DESIGN SERIES 

HANDLEBAR GRIP SETS 

RBS "Design Series" handlebar grip sets are 

machined out of billet aluminum. Available 

in three different designs in your choice of 

polished or black anodized. Fit all models 

1973 to present with single or dual throttle 

cables,except those with handlebar mounted 

fork air reservoir. A perfect match with RBS 

foot and shifter pegs. 

Grooved Style 


722282 Black 

HEATED HAND GRIPS 

Keeps your hands warm and comfortable 

when the weather turns cold. Warm hands 

have a major impact on overall comfort and 

safety, and as we all know gloves sometimes 

are not enough. This self-containing 

handlebar grip set features a chrome 

weatherproof heat control switch built into 

the left grip, 3 level heat control, soft grip 

rubber for a comfortable ride, hidden wires 

between left and right, as well as chrome end 

caps for the finishing touch. Comes pre wired 

and is easy to install on V-Rod,Sportster,Dyna 

and Softail models to present, as well as FLH 

& FLT Touring models thru 2007. 

722383 Heated hand grips 

RSD BILLET HANDLEBAR END 

PLUGS 

Exactly the same plugs as supplied with most 

Roland Sands Design handlebars. Made from 

billet aluminum.Available Natural or chrome 

plated. Sold in packs of 4. 

740706 Handlebar end plugs, natural 

aluminum, 4-pack 

740707 Handlebar end plugs, Chrome, 

4-pack 

V-Style 


722284 Black 

Twister Style 


722286 Black 

CHROME HANDLEBAR END PLUG 

Chrome 15/16" punch in plugs for Harley- 

Davidson grips 1960 thru early 1983. Fits 

25/32" diameter holes. Sold in 10 packs 

(OEM 56238-62). 

052016 Chrome handlebar end plug 

"THE FACTORY" CAST SHIFTER 

ORNAMENTS 

Hand cast from brass or aluminum by "The 

Factory" using traditional casting methods. 

Originally designed as a knob for hand shift 

models, but nobody is keeping you from 

putting it somewhere else on your bike.Heads 

are approx. 3 3/4" (9.5 cm) high and have a 

threaded hole at the bottom. Great vintage 

looks that can be combined with other cast 

brass covers from "The Factory" found 

elsewhere in this catalog. Heads are, like 

almost any part from "The Factory", 

attractively packed in a true Old Skool 

wooden box. 

735464 Frankenhead, brass 

735491 Frankenhead, aluminum 

735466 Virgin Mary, brass 

735493 Virgin Mary, aluminum 

735469 Jaws, brass 

735496 Jaws, aluminum 




Lever Blades 

SHOW-CHROMED LEVER 

ASSEMBLY 

Available with or without cable adjuster. Can 

be used as clutch lever, also usable as brake 

lever for cable operated front brakes. Fits 1" 

handlebars, will also fit 7/8" handlebars 

when reducer sleeves are used (ZPN 242000). 

053023 Lever assy with 5/16" cable 

hole, fits FL 1965 thru 

1967 (OEM 45002-65A) 

053032 Lever assy with 3/8" cable hole, 

fits Sportster 1965 thru 

1970 (OEM 38604-65A) 

053042 Lever assy with cable adjuster 

LATE MODEL LEVER BLADES 

Solid, strong aluminum lever blades. These 

"Easy to Pull" replacement levers fit all Harley 

models 1982 thru 1992.Available your choice 

of chrome plated aluminum or polished 

aluminum. 

Clutch lever (OEM 45062-82T) 



Brake lever (OEM 45064-82T) 



PIVOT PIN AND BUSHING SET 

Clutch and brake lever pivot pin.Fits Sportster 

1965 thru 1981 and Big Twins clutch levers 

1968 thru 1981. Also fits Sportster brake 

levers 1965 thru 1972, FL 1968 thru 

1971 and FX 1971 thru 

1972 (OEM 45036-68 & 45039-68). 

053015 Pivot pin and bushing set 


BRAKE AND CLUTCH LEVERS 

These brake and clutch levers have an extra 

wide lever blade for the ultimate grip. 

Available individually and in sets. 


REPLACEMENT LEVER BLADES 

Chrome plated replacement levers for Harley 

FL/FX/XL models 1965 thru 1981. 

053019 Clutch and drum brake lever 

(OEM 45080-83T) 

053020 Disc brake lever 

(OEM 45082-83T) 

POWER LEVER BLADES FOR 

EARLY MODELS 

Chrome plated levers with power leverage 

design and comfort grip. Fits Harley models 

1965 thru 1981. 

053018 Clutch and drum brake lever 

(OEM 45017-69T) 

053017 Disc brake lever 

(OEM 45016-73T) 

REPLACEMENT NYLON PIN 

Replacement nylon pin eyelet style for 

1988 to present models. 

114540 Nylon pin for eyelet style cable 

(OEM 45036-88) 

PIVOT PIN WITH CLIP 

Replacement pin and clip for our lever 

assembly. Fits most models 1965 thru 1987. 

(OEM 45031-65 & 11036) 

051200 Pivot pin with clip 

Fits 1993 thru 1995 Sportster, 

Softail, Dyna, and Touring models 

051254 Brake lever, chrome 

(OEM 45016-93) 

051255 Brake & clutch lever set, chrome 


Fits 1996 thru 2003 Sportster 

models, 1996 to present Softail 

and Dyna, and 1996 thru 

2007 Touring models 

053104 Brake lever, chrome 

(OEM 45016-96) 



053120 Brake & clutch lever set, 

black (OEM 44994-07) 


Lever Blades 

BRAKE AND CLUTCH LEVERS FOR 

TOURING AND V-ROD 

Stock replacement brake and clutch levers in 

chrome or black. 

Brake levers 

053644 Fits 2006 to present V-Rod and 

2008 to present Touring 

models, chrome 

(OEM 42860-06B) 


2008 to present Touring 

models, black 

(OEM 42860-06B) 

Clutch levers 

053645 Fits 2008 to present Touring 

models with cable clutch, 

chrome (OEM 45015-08) 


models with cable clutch, black 

(OEM 45015-08) 


Touring models with hydraulic 

clutch, chrome 

(OEM 42876-06A) 


Touring models with hydraulic 

clutch, black (OEM 42876-06A) 

Clutch and brake lever sets 

053503 Fits 2004 to present Sportster, 

black (OEM 46944-07) 


models with cable clutch, 

chrome (OEM 38843-08) 


models with cable clutch, black 

(OEM 38845-08) 

CHROME PLATED "STEALTH 

STYLE" CLUTCH & BRAKE LEVERS 

These chrome die-cast levers will add the 

finishing touch to your 1982 thru 

1995 Harley-Davidson motorcycle. They are 

sold separately. Clutch lever comes with antirattle 

clip and lever pivot bushings. 

053037 Clutch lever (OEM 45062-82T) 

053045 Brake lever (OEM 45064-82T) 

"ANTI-RATTLE" CONTROL LEVERS 

These clutch and brake lever sets feature an 

anti-rattle clip on the clutch lever.Available for 

all Big Twin (including Twin Cams) and 

Sportster models 1996 to present with cable 

operated clutch. Sold in sets of brake & clutch 

lever. 

053501 Chrome, fits 2004 to present 

Sportster models 

(OEM 44992-07) 

053503 Fits 2004 to present 

Sportster, black 

(OEM 46944-07) 

053502 Chrome, fits 1996 thru 

2003 Sportster models, 1996 to 

present Softail & Dyna, and 

1996-2007 Touring models 

(OEM 45075-07) 

053902 Black, fits 1996 thru 

2003 Sportster models, 1996 to 

present Softail & Dyna, and 

1996-2007 Touring models 

(OEM 45075-07) 

"WIDE" BRAKE AND CLUTCH 

LEVERS 

They may look exactly the same as the 

OEM lever blades but you will notice the 

difference when you fit them.These "Wide" 

levers are an ergonomic design with 

smoothed edges and approximately 

10 degrees rotated blades, which permits 

them to fit the hands with more comfort. 

These lever blades are chrome plated die-cast 

aluminum and come with the latest style 

spiral pivot bushings and an anti-rattle clip 

for the clutch lever. 

Fits 1982 thru 1995 Big Twin and 


053066 Brake and clutch lever set 

053065 Brake lever only 

053064 Clutch lever only 

Fits 1996 thru 2003 Sportster 

models, 1996 to present Softail & 

Dyna, and 1996-2007 Touring 

models 

053114 Brake and clutch lever set 



"BAD TO THE BONES" STEALTH 

STYLE CLUTCH AND BRAKE 

LEVERS 

Another addition to our line of skull-mania 

products.These brake and clutch levers have 

a three dimensional skull on the end for that 

real "Bad to the Bones" look and are 

available with plain or red colored eyes. Fits 

all models from 1982 thru 

1995 (OEM 45062-82T & 45064-82T). 

053077 Clutch plain eyes 

053078 Brake plain eyes 

053080 Clutch Red eye 

053079 Brake Red eyes 




Lever Blades 



ROLAND SANDS AVENGER 

LEVERS 

Race-styled stock replacement levers add an 

aggressive look to your OEM controls. Levers 

are CNC machined from billet aluminum and 

are a direct bolt-on to stock controls. 

Fits 2008 to present FLH and FLT 

series Touring models 

Set brake & clutch 



751957 Chrome 

Fits 1996 thru 1999 Big Twin, 

1999 thru 2007 Touring, 1999 to 

present Softail, 1999 to present 

Dyna and 1996 thru 

2003 Sportster 




751963 Chrome 

Fits 2004 to present XL Sportster 




751960 Chrome 

ROLAND SANDS AVENGER INLAY 

LEVERS 

All the clean style of the Avenger levers with 

the added comfort of a soft touch rubber inlay 

for long days of heavy clutch pulls and quick 

stops. Levers are CNC machined from billet 

aluminum and are a direct bolt-on to stock 

controls. 


series Touring models 




751948 Chrome 

Fits 1996 thru 1999 Big Twin, 

1999 thru 2007 Touring, 1999 to 

present Softail, 1999 to present 

Dyna and 1996 thru 

2003 Sportster 




751954 Chrome 

Fits 2004 to present XL Sportster 




751951 Chrome 

RSD REGULATOR LEVERS 

All the clean style of the Avenger levers with 

the added comfort of a soft touch rubber inlay 

for long days of heavy clutch pulls and quick 

stops.These race inspired levers are not only 

stylish stock replacements, but customizable 

for any size mitt. Enjoy the comfort of 

adjustability and a wide finger pull area on 

the RSD Regulator Lever.CNC machined from 

billet aluminum and feature a laser-engraved 

RSD logo. 

Fits all 1996 to present Softail and 

Dyna, 1996 thru 2007 Touring and 

1996 thru 2003 Sportster 



751945 Chrome 

Fits all 2004 to present Sportster 



751942 Chrome 

Fits all 2008 to present Touring 

with cable operated clutch 



751939 Chrome 


Handlebar Controls 

CHROME HANDLEBAR CONTROLS FOR 1972 THRU 

1981 MODELS 

Complete chromed handlebar master cylinder and clutch lever bracket 

fits Sportster and FX models 1973 thru 1981 and FL models 1972 thru 

1981.Handlebar master cylinder assembly includes brake lever,Custom 

master cylinder cover, brake line fitting, stoplight switch and all other 

inside components. Switch housings take both OEM and Zodiac rocker 

and button switches. 

Complete set 

231999 For single and dual disc models 

Replacement parts 

148027 Master cylinder assembly (OEM 45010-73) 

027512 Master cylinder gasket (OEM 45012-72) 

231995 Clutch lever bracket (OEM 38608-73) 

231997 Vertical switch housing (OEM 71539-73B) 

241253 Horizontal switch housing (OEM 71539-72) 

148015 Mastercylinder repair kit 

722380 Replacement master cylinder cap with gasket 

(OEM 45057-72) 

Accessories 

231994 Switch housing plain, designed for use when switches 

are relocated for a clean custom appearance 

233302 10-24 x 1/4" allen head screws (10 pack) 

CHROME BANJO BOLTS AND WASHERS 

Replacement banjo bolts for Zodiac and Original Equipment handlebar 

master cylinders and calipers.Available for most models from 1982 to 

present. Sold each. 

292203 Fits Zodiac and OEM brake calipers and master cylinders 

with 10 mm brake line banjo fittings 

292214 Fits Zodiac and OEM master cylinder with 12 mm brake 

line banjo fittings 

CHROME HANDLEBAR CONTROLS FOR 1982 THRU 

1995 MODELS 

Chrome handlebar mounted brake and clutch control assemblies with 

switch housing for 1982 thru 1995 models. Switch housings will accept 

the OEM or OEM styled aftermarket switches. The master cylinder 

assembly comes complete with handlebar clamp, chrome mounting 

hardware and a banjo bolt.All parts are separately available. 

Complete sets left and right side 

053111 With 3/4" (.750" bore master cylinder for all dual disc 

models from 1982 thru 1983 

053112 With 5/8" (.625" bore master cylinder for all single disc 

models from 1984 to present 

053113 With 11/16" (.687" bore master cylinder for all dual disc 

models (except those with radio controls) from 1984 to 

present 

Complete master cylinders 

144027 Master cylinder 3/4" bore (OEM 45013-82) 



Rebuild kits and parts, fits OEM and aftermarket 

master cylinders 

144224 Rebuild kit, fits master cylinder with 3/4" diameter bore 

(ZPN 053057) 1982 thru 1983 double disc models 


(ZPN 053060) 1984 thru 1995 single disc models 

144228 Rebuild kit, fits master cylinder with 11/16" diameter 

bore (ZPN 053061) 1984 thru 1995 double disc models 

053009 Brake/clutch lever clamp (OEM 45044-82) 

053053 Clutch lever assembly (OEM 38608-82 & 45017-82A) 

114540 Nylon pin for eyelet style cable (OEM 45036-88) 

232708 Gasket front brake cylinder (OEM 45012-82) 

Chrome-plated switch housings 

370122 Left top (OEM 71567-82) 

370124 Left bottom (OEM 71568-82A) 

370123 Right top (OEM 71564-82) 

370125 Right bottom (OEM 71563-82A) 







CHROME "WIDE" LEVER HANDLEBAR CONTROL KITS 

Chrome handlebar mounted brake & clutch control kits with switch 

housings and ergonomically designed levers for 1982 thru 1995 models. 

These lever blades may look exactly the same as the OEM part, but you 

will notice the difference when you fit them. "Wide" levers are an 

ergonomic design with smoothed edges and approximately 10? rotated 

blades providing a superior and more comfortable grip.Switch housings 

accept the OEM or aftermarket switches and wiring.These handlebar 

control kits are chrome plated diecast aluminum and fit both Sportster 

and Big Twin models.Available in different plunger diameters for single 

or dual disc applications.Levers and rebuild kits are separately available. 

Complete kits 

053116 With 3/4" bore master cylinder, fits 1982 thru 1983 dual 

disc brake models 

053117 With 5/8" bore master cylinder, fits 1982 thru 

1995 single disc brake models 

053118 With 11/16" bore master cylinder, fits 1984 thru 

1995 dual disc brake models 

Individual parts 

053066 Brake and clutch lever set 





(ZPN 053057) 1982 thru 1983 double disc models 


(ZPN 053060) 1984 thru 1995 single disc models 

144228 Rebuild kit, fits master cylinder with 11/16" diameter 

bore (ZPN 053061) 1984 thru 1995 double disc models 

114540 Nylon pin for eyelet style cable (OEM 45036-88) 

NOTE: THE NEW DOT 4 (AS USED IN THE LATE 

MODELS HARLEY-DAVIDSON) CAN BE MIXED 

WITH THE OLD DOT 4 WITHOUT ANY PROBLEM, 

EVEN WITH THE OLDER DOT 3. THE NEW DOT 

4 CAN NOT BE MIXED WITH DOT 5. 

DOT 5 IS A SILICON BASED FLUID THAT HAS 

ITS OWN FORMULA. THIS ALSO MEANS THAT 

DOT 4 CAN NOT BE USED IN A SYSTEM THAT 

HAS BEEN ON DOT 5 (AND VICE VERSA) 

UNLESS THE WHOLE SYSTEM HAS BEEN TAKEN 

APART AND CLEANED. IT ALSO NEEDS NEW 

SEALS AND CUPS BEFORE THE DOT 4 CAN BE 

USED. CLEANING THE PARTS WITH CLOTH OR 

PAPER IS ALSO NO OPTION, THEPARTSHAVETO 

BE VERY WELL CLEANED WITH BRAKE CLEANER!! 

(ZPN 235213 OR SIMILAR). 

CHROME HANDLEBAR CONTROL KITS 

Complete chrome plated handlebar control kit to fit the 1996 to present 

Big-Twin and 1996 thru 2003 Sportster models. Comes complete with 

switch housings. Housings accept OEM and OEM style aftermarket 

switches. All hardware needed is included. Available with 9/16" bore 

Master cylinder for Single disc models and 11/16" for Dual disc models. 

The handlebar switch housings are a chrome plated reproduction of the 

Original Equipment housings and will accept both OEM or aftermarket 

switches.All parts in these kits are available separately. 

Complete sets 

054002 With 11/16" Master cylinder for double disc models 

054003 With 9/16" Master cylinder for single disc model 

Master cylinders only 

236232 11/16" Master cylinder only (OEM 45072-96) 

236233 9/16" Master cylinder only (OEM 45006-96) 

Chrome switch housing kit, left and right side. Also 

usable as OEM replacement 

054001 Early style, fits 2002 thru 2006 V-Rod models and 

1996 thru 2006 Sportster, Dyna, Softail (except 

FXSTDSE) and FLHR Road King (except FLHRSEI) models 

(OEM 70222-96) 

Master cylinder repair kits (also fit OEM master 

cylinder), fits 9/16" bore master cylinder for single 

disc on 1996 to present Big Twin and Twin Cam models 

and 1996 thru 2003 Sportster (OEM 45006-96) 

144125 Fits 9/16" bore 

236234 Japanese import 


cylinder), fits 11/16" bore master cylinder for dual 

disc on 1996 thru 2005 Big Twin and Twin Cam models, 

2002 thru 2005 V-Rod and 1996 thru 2003 Sportster 

(OEM 45072-96) 





053104 Brake lever, chrome (OEM 45016-96) 


358058 Top cover gasket 



FITTING MASTER CYLINDER 

Fits front brake hose to master cylinder and can be used for Custom fit 

to rear brake "T". 

233410 Straight fitting (OEM 63609-72) 

BANJO BOLT SEAL WASHER 

This unique seal washer features a soft metal washer with vulcanized 

viton O-ring. Usable as replacement for all 3/8" and 10 mm banjo seal 

washers. Sold in 10 packs (OEM 41731-82). 

348014 3/8" (10 mm) aluminum with Viton insert, 10 pack 


Complete handlebar control kit for 2007 thru 2010 Softail, 2007 thru 

2011 Dyna and 2007 to present V-Rod. A perfect reproduction of the 

OEM parts, but with a chrome finish. Can also be used for 1996 and 

later Sportster and 1996 thru 2006V-Rod, Softail, Dyna and Road King 

but note that the left switch housing has a provision for the Clutch 

Interlocking Switch as introduced on the 2007 models.Comes complete 

with switch housings that accept original and original style aftermarket 

switches. All hardware needed is included. Available with 9/16" bore 

Master cylinder for Single disc models with cable or hydraulic operated 

clutch, as well as 11/16" for Dual disc models with hydraulic operated 

clutch. 

Complete sets 

053266 With 9/16" Master cylinder for single disc models and 

cable operated clutch 

053268 With 9/16" Master cylinder for single disc models and 

hydraulic clutch 

053267 With 11/16" Master cylinder for dual disc models and 

hydraulic clutch 



Complete handlebar control kit for 2007 to present Sportster models. 

A perfect reproduction of the Original Equipm-ent parts, but with a 

chrome finish. Comes complete with switch housings that accept 

OEM and OEM style aftermarket switches. All hardware needed is 

included.Available with 1/2" bore master cylinder for Single disc models 

and 9/16" for Dual disc models. 

Complete sets 

053263 With 1/2" Master cylinder for single disc models 

053262 With 9/16" Master cylinder for dual disc model 

Master cylinder rebuild kits 

144291 For 1/2" bore 

144292 For 9/16" bore 




















CHROME HANDLEBAR CONTROLS FOR TOURING 

MODELS 

Very complete kit to replace those dull black handlebar controls on all 

2008 to present Touring models with cable operated clutch.Kit includes 

complete clutch lever assembly and 15 mm bore front brake master 

cylinder for use with the stock Brembo brake calipers on ABS and non- 

ABS equipped models, as well as left and right side switch housings 

prepared for Cruise Control and Audio Control switches. 

053630 Chrome handlebar control kit 

CUSTOM STYLE HANDLEBAR CONTROL KITS 

Custom-styled chrome plated handlebar control kit. Re-styled from the 

OEM controls as used on 1996 to present Big Twin and Sportster 

models. Kits contain complete front brake master cylinder, clutch lever 

with perch, left and right side switch housings, and all required 

hardware.Available with 9/16" and 5/8" bore master cylinder for single 

disc models, and 11/16" bore for dual disc models.The switch housings 

are a reproduction of the OEM housings, but with a show chrome 

quality finish. Switch housings accept both OEM and aftermarket 

switches for 1996 to present Sportster and 1996 thru 2006 Softail and 

Dyna. 

053133 With 9/16" bore master cylinder 





cylinder) 





STOCK STYLE HYDRAULIC CLUTCH MASTER 

CYLINDER 

Chrome plated, restyled version of the hydraulic clutch master cylinder 

as found on the 2001 and later V-Rod. Has 11/16" bore. The design 

matches perfectly with the hydraulic brake master cylinder as used on 

1996 to present Big Twin and Sportster, so great for those who want 

to change the stock cable clutch into a smooth hydraulic operated 

clutch. Comes with 3/8" chrome 12-point banjo-bolt and seal washers. 

Hydraulic operated clutch release systems can be found in Chapter 8 of 

this catalog. 

Note: Will accept 1996 to present brake master cylinder caps and 

gasket (OEM 38657-01A). 

053137 Chrome clutch master cylinder 

053123 Replacement clutch lever 



















CUSTOM STYLE HANDLEBAR CONTROL KIT 

Styled after the handlebar controls as used on 1996 thru 2006 Big Twin 

and Sportster models, we designed these Custom style controls. Both 

the front brake master cylinder and clutch lever have more fluent lines, 

making them more looking like one part with the switch housings. 

Available with 9/16" bore master cylinder for use with single disc brake 

calipers. Switch housings are a show chromed reproduction of the 

OEM housings, and accept both OEM and aftermarket switches 


STOCK STYLE HANDLEBAR KIT WITH HYDRAULIC 

CLUTCH MASTER CILINDER 

Restyled from the OEM controls as used on 1996-2006 Big Twin, and 

1996 thru 2003 Sportster models. Both master cylinders have more 

fluent lines, making them more looking like one part with the switch 

housings.The included switch housings are show-chromed replica's of 

the OEM parts and accept OEM and aftermarket switches. Front brake 

master cylinder features 9/16" bore for use with single disc brake 

calipers. 

053146 Handlebar kit with hydraulic clutch master cylinder 

053123 Replacement clutch lever 

236235 Rebuild kit for clutch master cylinder 

CHROME GROOVED MASTER CYLINDER COVER 1996 

STYLE 

Replaces the black cover of the OEM front brake master cylinder, will 

also fit the clutch master cylinder on models equipped with a stock 

style hydraulic clutch master cylinder. Comes complete with mounting 

screws. Fits Evolution Big Twins 1996 thru 1999, and Sportster models 

1996 thru 2003 (OEM 45004-96A). 

144258 Chrome grooved master cylinder cover 

ZODIAC'S CUSTOM 

PRODUCTS BILLET 

ALUMINUM HANDLEBAR 

CONTROL 

Not just another custom product 

but a high quality custom 

handlebar control kit that can 

compete on the market.There are 

more on the market but none of 

them offer such a high quality in 

design and finish for such an 

affordable price. CNC machined 

from solid billet aluminum with a tribal engraved in the master cylinder 

top cover these controls do very well on any custom bike. Kits come 

complete with handlebar brake master cylinder, clutch lever assembly 

for cable operated clutch or handlebar clutch master cylinder and push 

button switches. Brake master cylinders are 5/8" bore, a bore size that 

works well with most single and dual disc brakes. Clutch master 

cylinders are 9/16" bore,a bore size that works well with most hydraulic 

clutch slave cylinders. Kits are available in high luster polished, black 

coated or chrome plated. 

Kits for cable operated clutch 


053530 Black 

053532 Chrome 

Kits for hydraulic operated clutch 


053529 Black 

053531 Chrome 


053280 Banjo bolt with adapter sleeve 

055400 Cable clutch lever, polished 

055404 Cable clutch lever, black 

055402 Cable clutch lever, chrome 

055401 Brake or clutch lever, hydraulic, polished 

055405 Brake or clutch lever, hydraulic, black 

055403 Brake or clutch lever, hydraulic, chrome 

055406 Rebuild kit for 5/8" bore brake master cylinder 

055407 Rebuild kit for 9/16" bore clutch master cylinder 

055408 Pivot pin for cable clutch lever 

055409 Pivot pin for hydraulic brake or clutch lever 

370314 Push button switch 





HYDRAULIC CLUTCH CONVERSION KITS FOR 1996 TO 

PRESENT SPORTSTER 

Complete handle bar control kits for all 1996 to present Sportster 

models to convert from your stock cable operated clutch into an easy 

to operate hydraulic clutch. Hydraulic operated clutches require 30% 

less effort compared to cable operated clutches. Kits contain brake 

master cylinder, clutch master cylinder, hydraulic clutch line, clutch slave 

cylinder and handlebar switch housings that take the stock switches. 

Easy to follow step-by-step installation instructions are also included. 

Available in chrome or black. 

054100 Chrome kit 

054101 Black kit 


054106 Clutch line with slave cylinder 

054110 Clutch master cylinder rebuild kit 

ROLAND SANDS DESIGNS MASTER CYLINDER CAPS 

Add some style to your stock hand controls with RSD's stock 

replacement master cylinder caps.Billet aluminum with a chrome,black 

Contrast Cut or RSD's propriety Black OPS finish.All covers come with 

one black and one brass RSD logo. Up to you which one you fancy 

most. 

Fits all 1996 thru 2003 Sportster, 2002 thru 2005 V- 

Rod, 1996 thru 2005 Softail, 1996 thru 2005 Dyna and 

1996 thru 2004 Touring models 

740857 Chrome 





HYDRAULIC CLUTCH CONVERSION KITS 

Complete handle bar control kits for all 1996 to present Big Twin 

models, including 6-speed Twin Cam 96 models, to convert a cable into 

a hydraulic operated clutch. Hydraulic operated clutches require 30% 

less hand lever effort compared to cable operated clutches. Kits come 

complete with all parts for on your handlebars, hydraulic line for the 

clutch, as well as a hydraulic slave cylinder that fits in the stock 

transmission cover that is mounted to the right side of your 

transmission. Step-by-step installation instructions are also included to 

allow for an easy conversion.Available in chrome or black finish. 

054102 Chrome clutch conversion kit for Big Twin 

054103 Black clutch conversion kit Big Twin 


054109 Clutch line with slave cylinder 

054110 Clutch master cylinder rebuild kit 

CHROME MASTER CYLINDER 

COVER 1996 STYLE 

This chromed cover adds a highlight to your 

black front brake master cylinder.Will also fit 

the clutch master cylinder on models equipped with a stock style 

hydraulic clutch master cylinder. Comes complete with gasket, fluid 

level view glass and mounting screws.Fits Evolution Big Twins 1996 thru 

1999, and Sportster models 1996 thru 2003 (OEM 45004-96A). 

144259 Chrome fluted master cylinder cover 

Fits all 2004 to present XL Sportster models 

740860 Chrome 



Fits all 2006 to present Softail, all 2006 to present 

Dyna and 2005 thru 2007 Touring models 

740854 Chrome 



Fits all 2008 to present Touring models 

740851 Chrome 




MODELS HARLEY-DAVIDSON) CAN BE MIXED WITH THE 

OLD DOT 4 WITHOUT ANY PROBLEM, EVEN WITH THE 

OLDER DOT 3. THE NEW DOT 4 CAN NOT BE 

MIXED WITH DOT 5. DOT 5 IS A SILICON BASED 

FLUID THAT HAS ITS OWN FORMULA. THIS ALSO 

MEANS THAT DOT 4 CAN NOT BE USED IN A SYSTEM 

THAT HAS BEEN ON DOT 5 (AND VICE VERSA) 

UNLESS THE WHOLE SYSTEM HAS BEEN TAKEN APART 

AND CLEANED. IT ALSO NEEDS NEW SEALS AND CUPS 

BEFORE THE DOT 4 CAN BE USED. CLEANING THE 

PARTS WITH CLOTH OR PAPER IS ALSO NO OPTION, 

THE PARTS HAVE TO BE VERY WELL CLEANED WITH 

BRAKE CLEANER!! (ZPN 235213 OR SIMILAR). 



ERGONOMIC HANDLEBAR SWITCHES FOR 1996 TO 

PRESENT MODELS 

These ergonomic switches are for use on 1996 to present bikes with 

the rounded handlebar controls.The contoured switch rockers provide 

easier operation and improved recognition, even when wearing gloves. 

Switches feature better water resistance for improved reliability in wet 

weather conditions. Switches come completely pre-wired with colorcoded 

48" long wiring harness for easy installation.Available in Chrome 

with black lettering or black with white lettering, Chrome with 

combined black symbols, or black with white symbols in complete kits. 

According to the latest European type approval regulations switches 

with symbols must be used on new motorcycles. Lettered switches are 

also available individually. Kits include wire terminals, mounting screws 

and instructions. Available for 1996 thru 2006 models and 2007 to 

present models.The 2007 to present version has an extra switch on the 

clutch lever that operates the clutch interlock system. Kits do not fit 

models with radio controls. 

Chrome with Black Lettering, 1996 - 2006 

370304 Complete kit 

Individual Parts 

700768 Left turn signal switch (OEM 71598-96) 

700766 Right turn signal switch(OEM 71591-96) 

700770 Horn and dimmer switch (OEM 71597-96) 

700764 Engine start and stop switch (OEM 71589-96) 

700772 Master cylinder stop light switch (OEM 71590-96) 

Black with White Lettering, 1996 - 2006 

370300 Complete kit 

Individual Parts 

700769 Left turn signal switch (OEM 71598-96) 

700767 Right turn signal switch (OEM 71591-96) 

700771 Horn and dimmer switch (OEM 71597-96) 

700765 Engine start and stop switch (OEM 71589-96) 

700772 Master cylinder stop light switch (OEM 71590-96) 

Chrome with combined Black Lettering/Symbols 

370318 Complete kit, fits 1996 thru 2006 models 

370199 Complete kit, fits 2007 to present models, except 2011 

and later Softail and 2012 and later Dyna 

Black with combined White Lettering/Symbols 

370317 Complete kit, fits 1996 thru 2006 models 

370200 Complete kit, fits 2007 to present models, except 2011 

and later Softail and 2012 and later Dyna 

HANDLEBAR MASTER CYLINDER REPAIR KITS 

Complete repair kits for the handlebar master cylinder on 1996 to 

present models. They include all internal parts needed for a complete 

rebuild. O-Rings and cups are made of special synthetic rubber to 

prevent swell. 

Fits 9/16" bore master cylinder for single disc on 

1996 to present Big Twin and Twin Cam models and 

1996 thru 2003 Sportster (OEM 45006-96) 




2004 thru 2006 Sportster (OEM 42803-04A) 

744480 Genuine 


2007 to present Sportster (OEM 42803-07A) 


Fits 11/16" bore master cylinder for dual disc on 

1996 thru 2005 Big Twin and Twin Cam models, 

2002 thru 2005 V-Rod and 1996 thru 2003 Sportster 

(OEM45072-96) 




2004 thru 2006 Sportster (OEM 42809-04B) 



2007 to present Sportster (OEM 42809-07A) 



2006 to present Twin Cam and 2006 to present V-Rod 

(OEM 42862-06A) 






BERINGER HANDLEBAR CONTROLS 

Beringer's brake master cylinder is a true high-tech development with 

its radial placed hydraulics and the hand lever rolling on 3 ball bearings 

to reduce friction.This combination provides maximum braking power 

with the least hand force.The piston diameter is optimized for use with 

any 4 or 6 piston Beringer caliper in either single or dual applications. 

Brake master cylinder and matching lever assembly for cable operated 

clutch are available in polished, black, or chrome finish. 


701525 701526 701527 Radial brake master cylinder 

for dual disc application 

701536 701537 701538 Radial brake master cylinder 

for single disc application 

701531 701532 701533 Radial clutch master 

cylinder 

701528 701529 701530 Clutch lever assembly 

MIRROR HOLDERS FOR BERINGER MASTER 

CYLINDERS 

These mirror holders fit perfect on Beringer's brake and clutch master 

cylinders. CNC machined billet aluminum with black anodized, chrome 

or polished finish. Note that these mirror holders are 

M10x1.25 threaded so do not take stock Harley-style mirrors. 

Left Right 

701540 701539 Black anodised 

701542 701541 Chrome 

701544 701543 Polished 



701534 Electric switch for brake or clutch master cylinder 

701535 Replacement inspection window and seal 

















PM CONTOUR BILLET ALUMINUM THROTTLE 

HOUSING 

Gloppy throttle housings have ruined a fair share of bikes, that's why 

PM designed this one as a perfect match with their Contour handlebar 

controls.Available for single cable, dual cable or dual cable snap-in in 

polished or black anodized. 

Single cable Contour throttle housing 


740560 Black 

Dual cable Contour throttle housing, can be used with 

all 1981 thru 1995 stock and stock-style cables 


740570 Black 

Dual cable snap-in Contour throttle housing, can be 

used with all 1996 to present stock and stock-style 

cables 


740571 Black 



PERFORMANCE MACHINE CONTOUR HANDLEBAR 

CYLINDERS 

PM's "Contour" machined clutch and brake master cylinders are a 

thing of beauty.The gracefully curved one piece body, adjustable reach 

handle and refined internals represent the very best in CNC art work. 

Designed with the Custom builder in mind, billet aluminum has never 

looked so good. Levers and perches are comfort designed, CNC 

machined from billet aluminum and then highly polished.The Contour 

handlebar master cylinders feature state-of-the-art contoured 

machining and race proven internals for a comfortable feel and 

unparalleled looks.The hot set-up for Custom bike builders.Available 

in polished or black anodized. 

Contour hydraulic clutch master cylinder 

Polished Black 

721383 740572 11/16" Bore 

Contour clutch lever assembly, includes perch, lever 

and clamp (will not work with OEM switch housing) 


721471 740573 Clutch lever assembly 

Contour front brake master cylinder 


721853 731402 9/16" Bore 

721381 731679 11/16" Bore 

Optional and replacement parts 

721887 Optional brake light switch 

721422 For Contour master cylinder 


721382 Replacement brake lever 

721384 Replacement clutch lever for hydraulic clutch master 

cylinder 

721394 Replacement lever 

PM CONTOUR HAND CONTROL SPACERS 

These Contour hand control spacers are designed to fill the gap between 

Performance Machine Contour switch housing and the grips on the 

clutch side. For those who use the popular 1 1/4" diameter Fat Style 

handlebars PM offers special Fat Bar adapter spacers, which are 

designed for both right and left side applications.Spacers are sold each. 

A. 722194 Fat Bar spacer left for cable clutch lever, polished 

B. 722195 Fat Bar spacer right or left for hydraulic reservoir, 

polished 

C. 722196 Control spacer for cable clutch lever, polished 

723196 Control spacer for cable clutch lever, black 

D. 722197 Control spacer for PM hydraulic clutch side spacer, 

polished 

723197 Control spacer for PM hydraulic clutch side spacer, 

black 







PM MASTER CYLINDER REBUILD KITS 

Kits for 9/16" bore 



721420 Manufactured after 01-12-1996 

721317 Manufactured 01-06-1995 thru 31-11-96 

721421 Manufactured before 01-06-1996 



721423 Manufactured after 01-12-1996 

721318 Manufactured 01-03-1996 thru 31-11-96 

721424 Manufactured before 01-03-1996 



PM Handlebar master cylinder gaskets 

721495 Fits all PM handlebar master cylinders except Contour 

models 

721496 Fits PM Contour handlebar master cylinders 

Recommended Master Cylinder Bore Sizes for use 

with OEM and other aftermarket front brake 

calipers 

Single disc: Classic 5/8" Contour 9/16" 

Dual disc: Classic 3/4" Contour 11/16" 

Recommended Master Cylinder Bore Sizes for use 

with PM front brake calipers 

PM Classic Style Contour Style 

Caliper Single Dual Single Dual 

125X2 5/8" 5/8" 9/16" 9/16" 

125X4R, S, SL 5/8" 5/8" 9/16" 11/16" 

112X6SSL, RSL, B 5/8" 5/8" 9/16" 9/16" 

112X6SSB, RSB 5/8" 3/4" 9/16" 11/16" 

162X2 5/8" 3/4" 9/16" 11/16" 

137X6 5/8" 3/4" 9/16" 11/16" 

137X4, R, B 5/8" 3/4" 9/16" 11/16" 

PM "CONTOUR" BILLET ALUMINUM SWITCH 

HOUSINGS 

PM's billet aluminum switch housings are a perfect complement to PM's 

Contour handlebar master cylinders. The subtle elegance blends with 

Contour hydraulic or cable operated handlebar controls creating a 

seamless look.Available as single button or three button switch units.Will 

not work with other than PM Contour handlebar controls. PM Contour 

switch housings are made from billet aluminum with a high luster polished 

finish.Come with high quality relaystyle push button switches to eliminate 

the use of separate relays. Switches are pre-wired with 24" leads. 

Single button switch housings 


721472 740574 Left, for use with hydraulic or cable operated 

clutch 

721473 740575 Right 

Three button switch housings 


721476 740576 Left, for use with cable operated clutch 

721474 740577 Left, for use with hydraulic clutch 

721475 740578 Right 

Replacement switches and buttons 

721966 Kill switch 

721967 Turn signal/starter/horn switch 

721968 High/low beam switch 

722457 Replacement round button, black 



















PM CONTOUR SWITCHES FOR TOURING MODELS 

These handlebar switches are for use with Performance Machine 

Contour brake and clutch controls. They utilize the OEM stereo and 

cruise control switches for a simple install and ease of use. Available 

in polished, chrome or black. 

For 4 switches and PM Contour hydraulic clutch 

control 


752057 Chrome 

752058 Black 

REBUILD KITS FOR GMA MASTER CYLINDERS 

The now obsolete rectangular billet aluminum master cylinders from 

GMA have been popular for many years. However, rebuild kits for these 

are still available. 

233728 Master cylinder repair kit 5/8" 

233729 Master cylinder repair kit 3/4" 

For 5 switches and PM Contour hydraulic clutch 

control 


752063 Chrome 

752064 Black 

For 4 switches and PM Contour cable clutch control 


752060 Chrome 

752061 Black 

For 5 switches and PM Contour cable clutch control 


752066 Chrome 

752067 Black 

For 4 switches and PM Contour brake control 


752069 Chrome 

752070 Black 

For 5 switches and PM Contour brake control 


752072 Chrome 

752073 Black 

NESS DIE-CAST CONED THROTTLE HOUSING 

• Designed to accept 1982 thru 1995 single throttle cable 

• Made from durable die-cast zinc 


A20298 Coned chrome die-cast throttle housing 

NESS BILLET LEFT SIDE FALSE "THROTTLE" HOUSING 

• For use on the handlebar's left side 

• Balances the looks of your bike's handlebars 

• Available in Grooved design with or without Petite switch 

A20279 Grooved 

A20278 Grooved with petite switch 







NESS BILLET THROTTLE HOUSING 

• Perfect compliment to Ness billet hand controls and grips 

• Available in either Grooved or Radius designs with or without Petite 

switch and for single and dual cable 

• CNC machined from 6061-T6 billet aluminum 


• Designed for 1982 thru 1995 throttle cable applications 

A20297 Grooved, Dual cable with Petite switch 

A20283 Radius, Single cable 

A20287 Radius, Single cable with Petite switch 

ARLEN NESS RAD III HANDLEBAR CONTROLS 

Arlen Ness introduces the industry's first factory replacement full custom 

hand controls. The RAD III controls are guaranteed to give your stock 

handlebars a great new look. Complete kits include: master cylinder, 

brake lever, clutch perch, brake lever and appropriate switch housings. 

Controls and switch housings accept all factory wires, cables, lines and 

switches.Available for single or dual disc 1996 thru 2007 models with 

cable operated clutch, also for models originally equipped with radio 

and/or cruise control 

• Any of our Arlen Ness mirrors and grips are a great addition to these 

kits 

Chrome Black 

A08745 A08870 Kit for Single Disc models, includes 9/16" 

Master Cylinder, Chrome 

A08746 A08871 Kit for Dual Disc models, includes 11/16" 

Master Cylinder, Chrome 

A08747 A08872 Kit for 1996 thru 2007 Dual Disc Touring 

models w/radio, includes 11/16" Master 

Cylinder Chrome 

A08748 A08880 Kit for 1996 thru 2007 Dual Disc Touring 

models w/radio & cruise, includes 11/16" 

Master Cylinder Chrome 

A08850 A08881 Kit for 2008 to present Dual Disc Touring 

models, includes 15 mm Master Cylinder 


models w/radio, includes 15 mm Master 

Cylinder 


models w/radio & cruise, includes 15 mm 

Master Cylinder 

Individual components 

Chrome Black 

A08740 - 9/16" Brake Master Cylinder (includes lever) 

A08741 - 11/16" Brake Master Cylinder (includes 

lever) 

A08860 - 15 mm Brake Master Cylinder with lever 

A08743 - Cable clutch perch with lever 

A08750 - Replacement Clutch Lever 

A08751 - Replacement Brake Lever 

A08752 - Replacement Brake Master Cylinder Cover 

A08737 A08877 Standard switch housing set 

A08738 A08878 Switch housing set with Radio 

A08739 A08879 Switch housing set with Radio & Cruise 

Control 


A08755 9/16" Complete Rebuild Kit 


A08865 15 mm Complete Rebuild Kit 



NESS-TECH ® RAD II HANDLEBAR CONTROLS 

• Radically sculptured Ness design. 

• Invisible mounting design for body, lid and levers 

• Bearing mounted levers for smooth operation 

• Carved from 6061-T6 billet aluminum 

• Kits include master cylinder, clutch lever, perch and switches where 

applicable 

• Elegantly chrome plated 

Note: 9/16” bore for single disc, 3/4” bore for dual disc applications 

3-Button 2-Button Smooth 

Switch Switch Style 

A08694 - A08632 9/16" Kit, Cable Clutch 

A08691 - A08653 3/4" Kit, Cable Clutch 

A08696 A08674 A08698 9/16" Kit, Hydraulic Clutch 

A08693 A08671 A08673 3/4" Kit, Hydraulic Clutch 

A08677 A08654 A08649 9/16" Brake Master 

Cylinder 

A08688 A08656 A08658 3/4" Brake Master Cylinder 

A08686 A08648 A08647 11/16" Hydraulic Clutch 

M/C 

A08680 - - Switch Housing Kit 

A08665 A08665 A08665 Brake Lever 

A08685 A08662 A08663 Clutch Lever Assembly, 

cable 

A08664 A08664 A08664 Clutch Lever, cable 

A08661 A08661 A08661 Clutch Lever Hydraulic 

3-Button 2-Button Smooth 

Switch Switch Style 

A08620 A08620 A08620 9/16" Rebuild kit 

A06628 A06628 A06628 5/8" Rebuild Kit 

A06629 A06629 A06629 3/4" Rebuild Kit 

A06659 A06659 A06659 11/16" Clutch M/C Rebuild 

Kit 

A06625 A06625 - Potted replacement switch 

with 30" wire leads, 

1997-up production (Can 

be used in earlier 

production with slight 

modification) 

A08621 A08621 - Button Cap 

A08666 A08666 A08666 Replacement Lid Gasket 

- - A08669 Switch Cover Kit 

A15502 A15502 - Easy Beam Hi/Lo Relay 







NESS RETRO-ROCKET HANDLEBAR CONTROL KITS 

• Innovative retro styling with modern day technology 

• All components are machined from 6061-T6 billet aluminum and 

chromed 

• Handlebar control kit available with 9/16" brake master for single disc 

applications with clutch lever assembly for cable operated clutch or 

master cylinder for hydraulic clutch 

• Handlebar control kit available with 11/16" brake master for dual 

disc applications with clutch lever assembly for cable operated clutch 

or master cylinder for hydraulic clutch 

• Three-button switch block designed to work on either brake or clutch 

side available separately 

• Matching design forward controls are also available 

Chrome 

A08720 

A08721 

A08722 

A08723 

A08704 

A08724 

A08725 

A08707 

A08732 

A08709 

Black 

A08726 Handlebar control kit 9/16" brake master 

cylinder with cable clutch 


with cable clutch 


with hydraulic clutch 


with hydraulic clutch 

A08711 Switch block, three-button 

A08730 Brake master cylinder 9/16" bore 

A08731 Brake master cylinder 11/16" bore 

A08713 Cable clutch lever assembly 

A08733 Replacement clutch lever 

A08717 Hydraulic clutch master cylinder 11/16" bore 


A08620 9/16" Rebuild Kit 



A08622 11/16" Bore brake rebuild kit 

A06659 11/16" Clutch M/C Rebuild Kit 

A08621 Button Cap 

A06625 Potted replacement switch with 30" wire leads, 

1997-up production (Can be used in earlier production 

with slight modification) 



NESS PETITE SWITCH, CUSTOM AND STOCK STYLE 

HANDLEBAR CONTROLS 

• Ness designed controls are CNC machined and chrome plated for a 

clean look 

• Petite Switch style feature small button switches that are virtually 

invisible 

• Custom style is the designed for the rider who wants clean switchless 

controls 

• Stock Style controls clean up the looks of your handlebar while 

retaining your stock 1996 to present switch gear 

• Kits available for single or dual disc brake and cable or hydraulic 

operated clutch 

Petite Switch style 

A08516 Kit, 3/4" brake, cable clutch 

A06666 3/4" Brake Master Cylinder only 


A06661 11/16" Clutch Master Cylinder only 

A06652 Clutch lever assembly with switch 

A06639 Petite switch clamp with switches, buttons and wiring 

Stock Switch Style 






A08515 Clutch Cable Pin Adapter For Eyelet Style Cables 

A06614 Clutch lever, Cable style 

A06605 Master Cylinder Cover and "Super-Seal" Gasket, Brake 

or Clutch 

A06646 Brake Lever W/ Plunger Pin 

A06623 Plunger pin for brake lever 

A06624 Clutch Lever Pivot Pin 

A06620 Early style switch, un-potted and unwired, each 

A06625 Potted replacement switch with 30" wire leads, 1997-up 

production (Can be used in earlier production with slight 

modification) 

A06621 Switch button cap, each 


Custom Style 


A08552 Kit, 5/8" brake, hydraulic clutch 




A06660 11/16" Clutch Master Cylinder only 

A06647 Clutch lever assembly 

PARTS FOR NESS RADIUS CONTROLS 

• Replacement parts for the obsolete Radius handlebar controls 

A08606 3/4" brake master cylinder, switch style 

A06606 Brake master cylinder cover and seal 

A06607 Clutch master cylinder cover and seal 

A06625 Potted replacement switch with 30" wire leads, 1997-up 

production (Can be used in earlier production with slight 

modification) 

A06620 Early style switch, un-potted and unwired, each 

A08621 Button Cap 



A06634 5/8" Hydra clutch rebuild kit 

A06623 Plunger pin for brake lever 






REBUFFINI ELLIPSE HANDLEBAR CONTROLS 

Rebuffini's "Ellipse" controls are a very clean design that matches 

with almost any style of bike. Ellipse controls can be used with 1" 

diameter handlebars as well as 1 1/4" stepped design bars, such as 

our Phat handlebars. Brake levers are available in 1/2" bore for use in 

single disc applications and 9/16" bore for use in dual disc applications. 

Clutch levers are available for use with the stock clutch cable or for use 

with a hydraulic clutch. Both the brake and clutch master cylinders are 

equipped with adjustable reach levers. These controls are not 

compatible with stock switch housings. Matching 2-button and 

3-button switch blocks are available separately. The 3-button switch 

blocks are also available with EC-compliant engraved symbols.All parts 

are CNC machined from solid billet aluminum available with a high 

luster polished finish, black anodized or chrome plated. 

Brake master cylinders 

1/2" bore 9/16" bore 

746081 746087 Polished 

746082 746088 Black 

746083 746089 Chrome 

Brake master cylinders, TÜV approved 

1/2" bore 9/16" bore 

746084 746090 Polished 

746085 746091 Black 

746086 746092 Chrome 

Clutch lever assemblies 

Cable Hydraulic 

746096 746093 Polished 

746097 746094 Black 

746098 746095 Chrome 

Switch assemblies for brake side 

2-Button 

Smooth Smooth Symbols 

746142 746145 746112 Polished 

746143 746146 746113 Black 

746144 746147 746114 Chrome 

Switch assemblies for hydraulic clutch assemblies 

2-Button 


746148 746151 746115 Polished 

746149 746152 746116 Black 

746150 746153 746117 Chrome 

Switch assemblies for cable clutch assemblies 

2-Button 


746169 746172 746118 Polished 

746170 746173 746119 Black 

746171 746174 746120 Chrome 

Replacement clutch levers 


746160 746157 Polished 

746161 746158 Black 

746162 746159 Chrome 

Brake light switches 


746166 Black 

Clutch/kickstand switches 

To maintain the stock kickstand sensor on 2008 and later models 


746168 Black 

Rebuild kits 

746099 For 1/2" bore brake master cylinder 

746100 For 9/16" bore brake or clutch master cylinder 

Replacement brake levers 


746155 Black 

746156 Chrome 

Replacement switch parts 

746111 On/off switch 

746110 Momentary switch 

746121 Switch button cap 



REBUFFINI COMET HANDLEBAR CONTROLS 

Rebuffini's "Comet" controls drastically change the looks of your bike. 

These controls look more like "growing from" as "bolted on" your 

handlebars. CNC machined from solid billet aluminum available with 

a high luster polished finish, black anodized or chrome plated. These 

controls can be used with 1" diameter handlebars as well as 1 1/4" 

stepped design bars, such as our Phat handlebars. Brake levers are 

available in 1/2" bore for use in single disc applications and 9/16" 

bore for use in dual disc applications. Clutch levers are available for 

use with the stock clutch cable or for use with a hydraulic clutch. 

Matching 2-button and 3-button switch blocks are available separately. 

The 3-button switch blocks are also available with EC-compliant 

engraved symbols. 


1/2" bore 9/16" bore 

746122 746129 Polished 

746123 746130 Black 

746124 746131 Chrome 

Brake master cylinders, TÜV approved 

1/2" bore 9/16" bore 

746125 746132 Polished 

746126 746133 Black 

746127 746134 Chrome 



746139 746135 Polished 

746140 746136 Black 

746141 746137 Chrome 



746160 746157 Polished 

746161 746158 Black 

746162 746159 Chrome 

Brake light switches 


746166 Black 

Clutch/kickstand switches 

To maintain the stock kickstand sensor on 2008 and later models 


746168 Black 

Rebuild kits 



746128 Top cover seal brake master cylinder 

746138 Top cover seal clutch master cylinder 



746155 Black 

746156 Chrome 

Replacement switch parts 

746111 On/off switch 

746110 Momentary switch 

746121 Switch button cap 



NOTE: REBUFFINI RECOMMENDS THE USE OF 

NON-SILICONE DOT 4 HYDRAULIC FLUID. 





REBUFFINI MINI HANDLEBAR CONTROLS 

A stylish design by Rebuffini. CNC machined from solid billet aluminum 

available with a high luster polished finish, black anodized or chrome 

plated. These controls can be used with 1" diameter handlebars as 

well as 1 1/4" stepped design bars, such as our Phat handlebars. Brake 

levers are available in 1/2" bore for use in single disc applications and 

9/16" bore for use in dual disc applications. Clutch levers are available 

for use with the stock clutch cable or for use with a hydraulic clutch. 

Hydraulic fluid reservoir must be ordered separately, allowing you to 

make a combination that looks exactly the way you want it. Matching 

2-button switch blocks are available separately. 

Rebuild Kits 





746209 Black 

746210 Chrome 


1/2" bore 9/16" bore 

746181 746184 Polished 

746182 746185 Black 

746183 746186 Chrome 

Clutch levers 


746190 746187 Polished 

746191 746188 Black 

746192 746189 Chrome 

Hydraulic fluid reservoirs 

Alpha Beta Gamma 

746193 746196 746199 Polished 

746194 746197 746200 Black 

746195 746198 746201 Chrome 

2-Button switch assemblies 

Left Right 

746202 746205 Polished 

746203 746206 Black 

746204 746207 Chrome 



746214 746211 Polished 

746215 746212 Black 

746216 746213 Chrome 

REBUFFINI'S BILLET THROTTLE HOUSINGS 

CNC machined handlebar throttle housings. Made from solid billet 

aluminum on state of the art machinery.Available in polished, chrome 

plated or black anodized. Single cable housings are threaded 

5/16-18 for use with 1981 thru 1996 style throttle cables. Dual cable 

housings are threaded 5/16-18 and 1/4-20 for use with 1981 thru 

1996 style throttle and idle cables. Snap-in style throttle housings take 

1996 to present throttle and idle cables. 

Single cable 


746102 Black 

746103 Chrome 

Dual cable 


746105 Black 

746106 Chrome 

Snap-in style 


746108 Black 

746109 Chrome 

NOTE: REBUFFINI RECOMMENDS THE USE OF 

NON-SILICONE DOT 4 HYDRAULIC FLUID. 



BILLET DESIGNER HANDLEBAR CONTROLS BY 

KUSTOM TECH 

These designer handlebar controls are another proof that Italians can 

produce very stylish parts and accessories.These Custom controls are 

CNC machined from billet aluminum. Levers and perches have radiused 

edges, offering a very comfortable pull.With their polished finish they 

are the hottest set-up available for any Customizer. All components 

are separately available.Available are 14 mm bore handlebar master, 

a 14 mm clutch master cylinder, or as set that includes a cable operated 

clutch lever assembly and a 14 mm diameter brake master cylinder. 

741138 Cable clutch lever assembly and brake master cylinder 

741139 Brake master cylinder 

741140 Clutch master cylinder 

741141 Rebuild kit for brake or clutch master cylinder 

KUSTOM TECH THROTTLE HOUSINGS 

Kustom Tech's throttle housings are designed for use with just a single 

throttle cable and made from forged aluminum or forged brass. Both 

brass and aluminum throttle housings are available in polished and 

satin finish. A perfectly match with Kustom Tech's DeLuxe handlebar 

controls. 


751243 Satin brass 


751245 Satin aluminum 


















KUSTOM TECH DELUXE SWITCH HOUSINGS 

Kustom Tech's DeLuxe switch housings are forged from solid brass. 

Available in polished, satin, chrome plated and satin chrome plated 

finish. Compact size and feature external fins to match perfectly with 

Kustom Tech's DeLuxe handlebar controls. 


751247 Satin brass 

751248 Chrome 

751249 Satin chrome 





KUSTOM TECH DELUXE HANDLEBAR CONTROLS 

Kustom Tech's DeLuxe handlebar controls have a design that is inspired by the handlebar controls 

found on vintage motorcycles. These controls are CNC machined from billet material and have 

a polished or satin finish. Available in aluminum or a beautiful combination of aluminum and 

brass. 


751270 12 mm bore, polished brass and aluminum 

751271 12 mm bore, satin brass and aluminum 

751274 12 mm bore, polished aluminum 

751275 12 mm bore, satin aluminum 

751272 14 mm bore, polished brass and aluminum 

751273 14 mm bore, satin brass and aluminum 

751276 14 mm bore, polished aluminum 

751277 14 mm bore, satin aluminum 


751278 Brass and aluminum, polished 

751279 Brass and aluminum, satin 

751280 Aluminum, polished 

751281 Aluminum, satin 


751282 Clutch cable adjuster, brass 

751283 Rebuild kit for 12 mm bore brake master cylinder 

751284 Rebuild kit for 14 mm bore brake master cylinder 



MINI PUSH BUTTON SWITCH 

This tiny little stainless steel push button 

switch comes with a special radius shaped 

spacer to allow mounting in handlebars. 

Switch works for turn signal. starter, horn, kill 

or hi-low, must be used with a switch relay. 

Requires a 9/32" hole and 5/16" UNF nut. 

Switch is less than 1/2" in diameter and sticks 

only 1/4" above the handlebar surface. Of 

course you can also install this switch on flat 

surfaces when you do not use the radius 

shaped spacer. Installation requires a 9/32" 

drill and a 5/16-24 UNF tap. Switch comes 

with two 20" wires installed. 


TWO BUTTON HANDLEBAR 

SWITCH 

Chrome handlebar switch housing for use on 

1" (25.4 mm) handlebars. Features 

2 momentary push button switches that come 

pre-wired. Housing is only 1/2" (12 mm) 

wide. Great to control air shock compressors 

or auxiliary lights. 

370268 2-Button handlebar switch 

TWIN USB POWER DEVICE 

This Twin USB power device has two standard 

USB sockets. Great for your GPS, mobile 

phone, digital camera or anything else that 

can charge via a USB connection. This 

lightweight device is shock- and 

weatherproof and can be easily mounted on 

all 7/8" to 1" (22 to 25.4 mm) handlebars. 

Comes pre-wired with 120cm long wires. 

Installation instructions are included. 

390049 Handlebar mounted USB power 

device 


Handlebar Controls/Control Cables 

CIGARETTE LIGHTER OUTLET 

This 12 Volt car-type cigarette lighter comes 

in a moisture proof plastic housing and 

features a strong clamp that can be fitted to 

any 7/8" (22 mm) or 1" (25.4 mm) tube, such 

as your handlebars. Has a rubber cap to seal 

it off when the lighter is taken out. Provides 

you with a 12 Volt outlet as a power supply 

for almost any GPS navigation system,mobile 

phone, MP3 player and so on as these usually 

come with a cigarette lighter style plug. The 

outlet comes pre-wired with an in-line fuse 

holder and 10 Amp wedge type fuse. 

500400 Cigar lighter outlet 

HANDLEBAR MOUNT KIT FOR 

MOBILE DEVICES 

This handlebar mount kit provides mounting 

options for many of today's popular mobile 

electronics, such as cell phones, PDA's, 

Satellite Radio's and GPS units. The mount 

attaches to the clutch lever perch on the 

handlebars of all 1982 to present models with 

the included hardware. Mount is made from 

thick 12 gauge (2 mm) steel with chrome or 

black finish and features the standard hole 

pattern for mobile device cradles.The specific 

cradle for your device can be obtained from 

shops specialized in mobile electronics. 

163057 Chrome multi mount kit 

163058 Black multi mount kit 

BLACK ADDER CABLE CLAMPS 

These tough black Elastomer clamps won't 

scratch your paint,won't rust and won't break 

but still route throttle, idle or clutch cables, 

ignition wires, brake lines and so on nice and 

tidy along the frame tubes. Also reduce 

vibrations and outer cable wear compared to 

metal cable clamps.They install in seconds as 

they snap on the tubes and use a strong and 

simple O-ring fixing system.Available with a 

single hole for one cable or boob-style double 

hole for two cables. Install using the small O- 

ring on 1 1/8" (28 thru 30 mm) tubes, the 

large O-ring for 1 1/4" (31.75 thru 32 mm) 

tubes. Sold in pairs. 

061006 Single cable version, 2 pieces 

061007 Dual cable version, 2 pieces 

POLISHED ALUMINUM PUSH ON 

CABLE CLAMPS 

To neatly route cables along your fork tubes, 

these highly polished clamps are available in 

either smooth or grooved versions. Universal 

fit on all forks with 1 5/8" (41.275 mm) 

diameter fork tubes. Sold in pairs. 

090121 Smooth 

090137 Grooved 

THROTTLE AND IDLE CABLE 

CLAMP 

Billet aluminum throttle and idle cable clamp, 

keeps your cables neatly together. Easy to 

install. Show chrome finish. 

061090 Throttle and idle cable clamp 

PRO-ONE CHROME PLATED 

BILLET ALUMINUM CABLE GUIDE 

CLAMPS 

Get those wild cables under control with 

these cable clamps.These billet cable clamps 

are another of those little details that mean 

the difference between winning and just 

being runner up.Available for speedo, clutch 

and single or dual throttle cables.All clamps 

have a perfect chrome plated finish. 

239404 Clutch cable clamp 1" 

239405 Clutch cable clamp 1 1/8" 

239406 Clutch cable clamp 1 1/4" 

239407 Throttle cable clamp 1" hole 

239408 Throttle cable clamp 2" hole 

239409 Speedo cable clamp 41.2 mm 




Control Cables 



ZODIAC CHROME CABLE CLAMPS 

Chrome plated aluminum cable clamps to 

route clutch and throttle cables neatly along 

frame tubes or handlebars.The 1" clamps will 

fit most aftermarket frames and may also be 

used on handlebars. The 1 1/8" clamps fit 

stock Softail, 4 Speed, and Sportster models 

thru 1981.The 1 1/4" clamps fit all Sportster, 

FXR and Dyna models 1982 to present. 

Available in plain and ball milled, throttle 

cable clamps are available for use with single 

or dual cable. 

Plain Ball Milled 

061101 061100 Clutch cable clamp 

1" frame or 

handlebar 


1 1/8" frame 


1 1/4" frame 

061107 061106 Single throttle cable 

clamp 1" frame or 

handlebar 

061109 061108 Dual throttle cable 

clamp 1" frame or 

handlebar 

CHROME PLATED BILLET 

ALUMINUM DUAL CABLE 

CLAMPS 

Chrome plated billet aluminum cable clamps 

to route both idle and throttle cables. 2-piece 

clamp design allows fixation of both cables 

without cable removal. Clamps are available 

in 5 different sizes to fit handlebars and/or 

tubes from 1" thru 2". 

061053 Dual throttle cable clamp 1" 

061054 Dual throttle cable clamp 

1 1/4" 


1 1/2" 


1 3/4" 

061057 Dual throttle cable clamp 2" 

BRAKE LINE AND WIRE CLIPS 

These clips are used in many places on models 

from 1968 to present.They are, for example, 

used to hold the rear brake line on the swing 

arm of 1958 thru 1986 4-speed Big Twins, 

throttle cables to the frame on Ironhead 

Sportsters and numerous other applications. 

Take up to 1/2" diameter hoses and cables 

and have a .200" mounting hole. 

099033 Brake line clip, dealer 10-pack 

(OEM 38712-68) 

THROTTLE WIRING EXTENSIONS 

FOR 2008 TO PRESENT "FLY BY 

WIRE" TOURING MODELS 

The "Fly By Wire" throttle control system as 

introduced on the 2008 Touring models 

replaces the commonly used throttle and idle 

cables. Installation of higher or wider than 

stock handlebars requires you to extend the 

OEM wiring.For this purpose we supply ready 

to install extensions that plug in between the 

existing connectors for trouble free operation. 

231891 8" (20 cm) extension kit 



PLUG-N-PLAY THROTTLE BY WIRE 

CABLE KIT 

This NAMZ Throttle-by-Wire "Plug-n-Play" 

wiring harness is a no brainer when adding 

taller handlebars on 2008 to present FLH and 

FLT series Touring models, except Screamin' 

Eagle and CVO. Longer than stock, one size 

fits all for handlebars up to 18" (46 cm) high. 

Simply remove the OEM harness and plug this 

one in. Comes ready to install and complete 

with OEM connectors. 

701668 Throttle-By-Wire wiring harness 

TROTTLE BY WIRE EXTENSIONS 

FOR 2008 TO PRESENT TOURING 

MODELS 

These Throttle-by-Wire extensions have been 

tested and designed by NAMZ to work 

perfectly without causing any harm or 

interference to the motorcycle's computer. 

Fits all 2008 to present FLH and FLT series 

models and are a must for all CVO & 

Screamin' Eagle models due to the hardwired 

twist grip assembly. These extensions 

do not require any soldering for a quick and 

easy installation. 

701669 Throttle By Wire extension, 4" 

(10 cm) 


(20 cm) 


(30 cm) 


(38 cm) 



REAR BRAKE CABLE FOR HARLEY XL 

Extra strong rear brake cables for XL models 1975 thru 1978. Black 

vinyl outer cable housing. 

114347 Fits 1975 thru 1978 (OEM 38634-76) 

INNER CABLE, OUTER CASING AND FITTINGS 

Now you can make control cables at any length you want.The casings 

as well as the inner cables come in 50 feet long rolls. Outer casing has 

black PVC coating. Throttle inner cable has 0.125" diameter, 

brake/clutch inner cable has 0.125" diameter.Together with the fitting 

assortment it is possible to make all cables fit perfectly to any 

Customized bike. The fitting assortment contains a variety of control 

fittings, cable ends and ferrules, packed in a handy plastic case.A must 

for every Custom bike workshop. 

Inner cable and outer casing 

232254 Inner cable throttle (roll 50 ft./15 meter) 

232497 Inner cable clutch & brake (roll 50 ft./15 meter) 

232255 Outer casing throttle (roll 50 ft./15 meter) 

232503 Outer casing clutch & brake (roll 50 ft./15 meter) 

Cable fittings 

232249 Fitting assortment for Harley-Davidson, containing 

nipples and ferrules as undermentioned (not necessarily 

in the same quantities) 

722389 Cable fitting #N-27, dealer pack of 10 

722427 Step-down ferrules #N-35, dealer pack of 10 

722428 Throttle Cable #47-7, dealer pack of 20 

722429 Throttle fitting #47-1, dealer pack of 25 

722430 Slide Lift Fitting #48, dealer pack of 50 

722431 Carburetor fitting #49 74-75, dealer pack of 

10 (OEM 56302-74) 

722432 Ferrule #52 for .22" casing, dealer pack of 30 

722433 Ferrule #53 for #30W casing, dealer pack of 20 

722434 Brass end #250F for .250" casing, dealer pack of 10 

722435 Brass end #250FS for .250" casing, dealer pack of 10 

722436 .375" End cap #63F for 70A & 80W casing, dealer pack 

of 10 

722437 Ferrule #619F for 70A & 80W casing, dealer pack of 10 

722439 Slotted #61-H bushing for 1/4" HD throttle casing, 

dealer pack of 10 

722438 Cable T end #63TK for Sportster clutch lever, each 

THROTTLE AND SPARK CONTROL CABLE 

Perfect reproduction of the early throttle and spark control cable. Inner 

wire is .050" diameter and 66" long. Outer housing is 53" long flexible 

wound with PVC covering and has end plug swaged in place. Fits FL 

1953 thru 1973, FX 1971 thru 1973 and XL 1957 thru 1973. 

114184 Inner cable (OEM 56373-58) 

114183 Outer cable (OEM 56503-65) 





CONTROL CABLES FOR HARLEY-DAVIDSON & BUELL 

Zodiac offers a wide selection of control cables for almost any 

type/model Harley-Davidson,Buell or Custom built motorcycles.Cables 

are available in three different brands: Zodiac, Barnett and Magnum 

Shielding. 

Zodiac control cables high quality cables at very competitive 

prices. 

Barnett Braided:American made classic stainless steel braid covered 

outer cable 

Zodiac Black: Stock replacement cables with a black vinyl covered 

outer cable 

Barnett Clear Coated: American made clear vinyl covered stainless 

steel braid outer cable 

Zodiac Braided: Same cables as above but with a Braided Stainless 

Steel covered outer 


Barnett Stealth: American Made totally black cables with black 

elbows and black adjusters 


Zodiac Clear Coated: Clear vinyl covered Braided Stainless Steel 

outer cable 

Barnett cables, American made control cables 

Barnett Black:American made stock replacement black vinyl covered 

outer cable 

Magnum Sterling Chromite: 

American made cables with a braided steel outer cable. Every strand 

of wire used for this braid is individually chrome plated for a super 

shiny appearance. Sterling Chromite cables and lines feature crystal 

clear Teflon outer jacket offering exceptional protection against scuffing 

paint and will never discolor. 

How to find your cable: 

We have grouped cables by application. Check in the application list 

what throttle, idle or clutch cable style and stock length you need for 

your model and than choose a cable from the cable listing.The lengths 

given are approximately and measured end to end of the visible outer 

cable and do not include the end fittings. 

Throttle and idle cables come with 90 or 130 degree elbows. The 

90 degree elbows add approx. 3 1/2" (8.9 cm) to the cable length, 

130 degree elbows add approx. 5" (12.7 cm) to the cable length. Do 

not mix 90 and 130 degree elbows for throttle and idle on the same 

motorcycle. 



Throttle Stock throttle Throttle and Idle cable for Fuel 

Models are listed Clutch Stock clutch and Idle and Idle Idle grip Injected models with 

in alphabetical order cable style cable length cable style cable length elbow fitting Cruise Control available 

Buell models 

M2 1997 to present XB96 50" XB96 32" Buell 

S1 & S3 1996-1998 XB96 50" XB96 32" Buell 

X1 1999 to present XB96 50" XB96 32" Buell 


XLCH 1971-1973 XL71 42" use ZPN 114184 + ZPN 114183 

XLCH 1974-early 1976 XL71 42" BT76 33" 90 degree 

XLCH late 1976-1979 XL71 42" BT76 33" 90 degree 

XLCR 1977-1978 XL71 38" BT76 33" 90 degree 

XLH 1100 1986-1987 XL86 59" XL86 32" 130 degree 


XLH 1200 Std. 1996-2001 XL86 57" XL96 30" 90 degree 


XL 1200C Custom 1996-1999 XL86 57" XL96 30" 130 degree 



XL 1200C Custom 2007-up XL86 53" XL07 30" 130 degree 

XL 1200L Low 2007-up XL86 59" XL07 30" 130 degree 

XL 1200N Nightster 2008-up XL86 59" XL07 30" 130 degree 

XL 1200R 2004-2006 XL86 53" XL96 30" 130 degree 

XL 1200R 2007-up XL86 53" XL07 30" 130 degree 

XL 1200S Sport 2001 XL86 53" XL96 30" 130 degree 

XL 1200S Sport 2002-2003 XL86 57" XL96 30" 130 degree 

XLH 1971-1973 XL71 42" Use cable 114183 + 114184 

XLH 1974-early ‘76 XL71 42" BT76 33" 90 degree 

XLH 1981-1985 XL71 42" BT81 41" 130 degree 

XLH 50 Anniversary 2007 XL86 53" XL07 30" 130 degree 



XLH 883 Deluxe 1987 XL86 53" XL86 32" 130 degree 

XLH 883 Deluxe 1988-1995 XL86 53" XL88 30" 130 degree 

XLH 883 Hugger 1996-2001 XL86 57" XL96 30" 90 degree 




XL 883 Std. 2004-2006 XL86 53" XL96 30" 130 degree 

XL 883 Std. 2007-up XL86 53" XL07 30" 130 degree 

XL 883C Custom 1999 XL86 53" XL96 30" 130 degree 




XL 883L Low 2002-2006 XL86 53" XL96 30" 130 degree 

XL 883L Low, SuperLow 2007-up XL86 53" XL07 30" 130 degree 

XL 883N Iron 2007-up XL86 53" XL07 30" 130 degree 

XL 883R Roadster 2002-2003, 2006 XL86 53" XL96 30" 130 degree 

XL 883R Roadster 2007-up XL86 53" XL07 30" 130 degree 

XLH Hugger 1988-1995 XL86 59" XL88 30" 130 degree 

XLH Hugger late 1987 XL86 59" XL86 32" 130 degree 

XLH late 1976-1980 XL71 42" BT76 33" 90 degree 

XLS Roadster 1979 -1980 XL71 38" BT76 33" 90 degree 

XLS Roadster 1981-1982 XL71 42" BT81 41" 130 degree 


XLT 1977 XL71 42" N/A N/A - 

XLX 1983-1985 XL71 38" BT81 41" 130 degree 

XR1000 (All) XL71 38" N/A N/A - 

XR 1200 2008-2010 XR08 .." XR08 .." .. ° 

XR 1200X 2008-up XR08 .." XR08 .." .. ° 

Big Twin models 

ELF (with mousetrap) 1952 BT52 30" Use cable 114183 + 114184 

FL models with 4-speed transmissions 1968-1975 BT68 49" BT76 33" 90 degree 



FL models with mousetrap 1952-1967 BT52 30" Use cable 114183 + 114184 

FLD Switchback 2012-up FXD06 65" BT96 32" 90 degree 

FLHR Road King 1994-1995 BT87 62" BT90 42" 90 degree 

FLHR Road King 1996-2001 BT87 62" BT96 44" 90 degree yes 

FLHR Road King 2002-2006 BT87 62" FLH02 41" 90 degree yes 

FLHR Road King 2007 FXD06 62" FLH02 41" 90 degree yes 

FLHR Road King 2008 FXD06 62" Note: 2008 and later Touring models do not use throttle,- and idle cables 

FLHRC Road King Classic 1998-1999 BT87 62" BT96 44" 90 degree yes 


FLHRC Road King Classic 2002-2006 BT87 62" FLH02 41" 90 degree yes 

FLHRC Road King Classic 2007 FXD06 62" FLH02 41" 90 degree yes 

FLHRC Road King Classic 2008-up FXD06 62" Note: 2008 and later Touring models do not use throttle,- and idle cables 

FLHRP 1996-2001 BT87 62" BT96 44" 90 degree 

FLHRS 2004-2006 BT87 62" BT96 44" 90 degree yes 

FLHRS 2007 FXD06 62" BT96 44" 90 degree yes 

FLHRS 2008-up FXD06 62" Note: 2008 and later Touring models do not use throttle,- and idle cables 

FLHS Electra Glide Sport 1987-1988 BT87 62" BT81 42" 90 degree 

FLHS Electra Glide Sport 1989 BT87 62" BT81 42" 90 degree 


FLHT Electra Glide 1983 FLT83 51" BT81 33" 130 degree 

FLHT Electra Glide 1984-1986 FLT83 51" BT81 42" 90 degree 

FLHT Electra Glide 1987-1989 BT87 62" BT81 42" 90 degree 












FLHT Electra Glide 2002 BT87 62" FLH02 41" 90 degree yes 

FLHT Electra Glide 2003-2005 BT87 62" FLH02 41" 90 degree yes 

FLHT Electra Glide 2007 FXD06 62" FLH02 40" 90 degree yes 

FLHTC Electra Glide Classic 1983 FLT83 51" BT81 33" 130 degree 

FLHTC Electra Glide Classic 1984-1986 FLT83 51" BT81 42" 90 degree 

FLHTC Electra Glide Classic 1987-1988 BT87 62" BT81 42" 90 degree 

FLHTC Electra Glide Classic 1989 BT87 62" BT81 42" 90 degree 


FLHTC Electra Glide Classic 1996-2001 BT87 62" BT96 44" 90 degree yes 

FLHTC Electra Glide Classic 2002-2006 BT87 62" FLH02 41" 90 degree yes 

FLHTC Electra Glide Classic 2007 FXD06 62" FLH02 40" 90 degree yes 

FLHTC Electra Glide Classic 2008 FXD06 62" Note: 2008 and later Touring models do not use throttle,- and idle cables 

FLHTC-SE Electra Glide Classic 2004-2005 hydraulic FLH02 40" 90 degree yes 

FLHTCU Ultra Classic Electra Glide 1989 BT87 62" BT81 42" 90 degree 

FLHTCU Ultra Classic Electra Glide 1990-1995 BT87 62" BT90 42" 90 degree yes 


FLHTCU Ultra Classic Electra Glide 2002-2006 BT87 62" FLH02 41" 90 degree yes 

FLHTCU Ultra Classic Electra Glide 2007 FXD06 62" FLH02 40" 90 degree yes 

FLHTCU Ultra Classic Electra Glide 2008-up FXD06 62" Note: 2008 and later Touring models do not use throttle,- and idle cables 

FLHX Street Glide 2006 FXD06 62" FLH02 41" 90 degree yes 


FLHX Street Glide 2008-up FXD06 62" Note: 2008 and later Touring models do not use throttle,- and idle cables 

FLS Softail Slim 2012-up FXD06 59" BT96 28" 90 degree 

FLST Heritage Softail 1986 FXST86 47" BT81 33" 130 degree 

FLST Heritage Softail 1987-1989 BT87 62" BT81 33" 130 degree 

FLST Heritage Softail 1990 BT87 62" BT90 32" 90 degree 

FLST Heritage Softail 2007-up FXD06 65" BT96 33" 90 degree 

FLSTC Heritage Softail Classic 1987-1989 BT87 62" BT81 33" 130 degree 



FLSTC Heritage Softail Classic 2000 BT87 64" BT96 32" 90 degree 


FLSTC Heritage Softail Classic 2007-up FXD06 65" BT96 32" 90 degree 

FLSTF Fat Boy 1990-1995 BT87 62" BT90 32" 90 degree 


FLSTF Fat Boy 2000 BT87 64" BT96 32" 90 degree 


FLSTF Fat Boy 2007-up FXD06 65" BT96 32" 90 degree 

FLSTF-SE Fat Boy 2005-2006 BT87 64" BT96 32" 90 degree 

FLSTN Nostalgia 1990-1995 BT87 62" BT90 32" 90 degree 



FLSTN Softail Deluxe 2007-up FXD06 65" BT96 32" 90 degree 

FLSTS Heritage Springer 1996-1999 BT87 62" BT96 32" 90 degree 

FLSTS Heritage Springer 2000 BT87 64" BT96 32" 90 degree 


FLSTSB Cross Bones 2008-up FXD06 65" BT96 32" 90 degree 

FLSTSC Heritage Softail Springer 2005-2006 BT87 64" BT96 32" 90 degree 

FLSTSC 2007-up FXD06 65" BT96 32" 90 degree 

FLT Tour Glide 1980 FLT79 55" BT76 33" 90 degree 




FLT Tour Glide 1984-1986 FLT83 51" BT81 42" 90 degree 

FLTC 1981 FLT79 55" BT81 42" 90 degree 



FLTC 1984-1986 FLT83 51" BT81 42" 90 degree 

FLTC 1987-1988 BT87 62" BT81 42" 90 degree 

FLTC 1989 BT87 62" BT81 42" 90 degree 


FLTCU 1989 BT87 62" BT81 42" 90 degree 

FLTCU 1990-1995 BT87 62" BT90 42" 90 degree 


FLTR Road Glide 1998-2001 BT87 62" BT96 44" 90 degree yes 

FLTR Road Glide 2002-2006 BT87 62" FLH02 41" 90 degree yes 

FLTR Road Glide 2007-up FXD06 62" FLH02 40" 90 degree yes 

FX Super Glide 1971-1975 BT68 49" BT76 33" 90 degree 


FXB Sturgis 1980 BT68 49" BT76 33" 90 degree 

FXB Sturgis 1981-1982 BT68 49" BT81 33" 130 degree 

FXCW Rocker 2008-up FXD06 65" BT96 32" 90 degree 

FXCW-C Rocker Custom 2008-up FXD06 65" BT96 32" 90 degree 

FXD Dyna Glide 1996-1999 BT87 68" BT96 32" 90 degree 


FXD Dyna Glide 2006-up FXD06 64" BT96 30" 90 degree 

FXD35 Anniversary 2006-2007 FXD06 64" BT96 33" 90 degree 

FXDB Sturgis 1991 BT87 62" BT90 32" 90 degree 

FXDB Daytona 1992-1995 BT87 68" BT90 32" 90 degree 

FXDB Street Bob 2006-up FXD06 68" BT96 32" 90 degree 

FXDC Dyna Glide Custom 1992-1995 BT87 68" BT90 32" 90 degree 

FXDC Dyna Super Glide Custom 2005 BT87 64" BT96 32" 90 degree 

FXDC Dyna Super Glide Custom 2006 FXD06 64" BT96 33" 90 degree 

FXDC Dyna Super Glide Custom 2007-up FXD06 68" BT96 30" 90 degree 

FXDF Dyna Fat Bob 2008-up FXD06 59" BT96 28" 90 degree 

FXDG Disc Glyde 1983 BT68 49" BT81 33" 130 degree 






FXDL Low Rider 1992-1995 BT87 68" BT90 32" 90 degree 



FXDL Low Rider 2006-up FXD06 65" BT96 33" 90 degree 

FXDS Dyna Glide Super 1992-1995 BT87 68" BT90 32" 90 degree 

FXDS-Conv Dyna Glide Convertible 1996-2005 BT87 68" BT96 32" 90 degree 

FXDWG Dyna Wide Glide 1992-1995 BT87 68" BT90 32" 90 degree 



FXDWG Dyna Wide Glide 2006-up FXD06 68" BT96 32" 90 degree 

FXDX Dyna Super Glide Sport 2000-2005 BT87 64" BT96 32" 90 degree 

FXDXT Dyna Super Glide T-Sport 2001-2003 BT87 64" BT96 32" 90 degree 

FXE 1973-1975 BT68 49" BT76 33" 90 degree 



FXEF 1979-1980 BT68 49" BT76 33" 90 degree 

FXEF 1981 BT68 49" BT81 33" 130 degree 


FXLR 1987 FXR87 61" BT81 35" 90 degree 

FXLR 1988-1989 FXR87 61" BT81 35" 90 degree 


FXR 1982 FLT79 55" BT90 33" 130 degree 

FXR 1983-1986 FLT83 51" BT81 33" 130 degree 

FXR 1987-1989 FXR87 64" BT81 33" 130 degree 


FXR 1999-2000 BT87 62" BT96 32" 90 degree 

FXR 2000 BT87 60" BT96 32" 90 degree 

FXRC 1985-1986 FLT83 51" BT81 33" 130 degree 

FXRC 1987 FXR87 64" BT81 33" 130 degree 

FXRD 1986 FLT83 51" BT81 35" 90 degree 

FXRDG late 1984 FLT83 51" BT81 33" 130 degree 

FXRS 1982 FLT79 55" BT81 33" 130 degree 

FXRS 1983-1986 FLT83 51" BT81 33" 130 degree 

FXRS 1987-1989 FXR87 64" BT81 33" 130 degree 


FXRS Sport Edition 1987-1989 FXR87 58" BT81 35" 90 degree 


FXRS Sport Edition- late 1985-1986 FLT83 51" BT81 33" 130 degree 

FXRT Sport Glide 1983-1986 FLT83 51" BT81 35" 90 degree 

FXRT Sport Glide 1987-1989 FXR87 64" BT81 35" 90 degree 


FXS Low Rider 1977-1980 BT68 49" BT76 33" 90 degree 


FXS Blackline 2012-up FXD06 59" BT96 28" 90 degree 

FXSB Low Rider 1983-1985 BT68 49" BT81 33" 130 degree 

FXST Softail Standard 1984-1985 BT68 49" BT81 33" 130 degree 

FXST Softail Standard 1986 FXST86 51" BT81 33" 130 degree 


FXST Softail Standard 1990 BT87 62" BT90 32" 90 degree 




FXST Softail Standard 2007-up FXD06 65" BT96 32" 90 degree 

FXSTB Night Train 1999 BT87 56" BT96 28" 90 degree 

FXSTB Night Train 2000-2006 BT87 58" BT96 28" 90 degree 

FXSTB Night Train 2007-up FXD06 59" BT96 28" 90 degree 

FXSTC Softail Custom 1986 FXST86 51" BT81 33" 130 degree 

FXSTC Softail Custom 1987-1989 BT87 62" BT81 33" 130 degree 



FXSTC Softail Custom 2007-up FXD06 65" BT96 32" 90 degree 

FXSTD Deuce 2000-2006 BT87 60" BT96 32" 90 degree 

FXSTD Deuce 2007 FXD06 63" BT96 32" 90 degree 

FXSTD-SE Deuce 2003-2005 BT87 60" BT96 28" 90 degree 

FXSTS Springer Softail 1988-1989 BT87 62" BT81 35" 130 degree 


FXSTS Springer Softail 1996-1999 FXR87 64" BT96 35" 130 degree 


FXSTSB Bad Boy 1995 BT87 60" BT90 32" 90 degree 

FXSTSB Bad Boy 1996-1997 BT87 60" BT96 32" 90 degree 

FXWG Wide Glide 1980 BT68 49" BT76 33" 90 degree 

FXWG Wide Glide 1981-1986 BT68 49" BT81 33" 130 degree 

V-Rod models 

VRSCA V-Rod 2002-2007 hydraulic VR02 30" 90 degree 

VRSCAW V-Rod 2008 hydraulic VR02 29" 90 degree 

VRSCAWA V-Rod 2008-up hydraulic VR02 29" 90 degree 

VRSCB V-Rod 2004-2006 hydraulic VR02 29" 130 degree 

VRSCD 2006-up hydraulic VR02 29" 130 degree 

VRSCDA 2008 hydraulic VR02 29" 130 degree 

VRSC-SE 2005-2006 hydraulic VR02 30" 90 degree 

VRSCDX Night Rod Special 2007-up hydraulic VR02 29" 90 degree 

VRSCDXA Night Rod Special 2008-up hydraulic VR02 29" 90 degree 

VRSCF V-Rod Muscle 2009-up hydraulic VR02 29" 90 degree 

VRSCR Street Rod 2006-2007 hydraulic VR02 29" 130 degree 

VRSCX 2007 hydraulic VR02 30" 90 degree 




Clutch Cables 

CLUTCH CABLES 

OEM Zodiac Zodiac Zodiac Zodiac Barnett Barnett Barnett Barnett Magnum 

Black AllBlack Braided Clear Black Stealth Braided Clear Sterling 

Coated 

Coated 

BT52 style clutch cables for 

1952 thru 1967 Big Twin 

4-speed models 

Fits models with stock “Mousetrap" 

clutch mechanism. Use BT68 style 

clutch cable on models with 

Mousetrap Eliminator 

30" (76 cm) length 38618-52 110050 - - - - - - - - 

36" (91 cm) length - 110051 - - - - - - - - 


1968 thru 1986 4-speed FX 

and FL, and FXST Softail 

1984 thru 1986 

49" (124 cm) length 38618-68C 114050 114852 114333 114904 722880 638807 - 722882 710561 

51" (130 cm) length - - - 114936 114906 - - - - - 

57" (145 cm) length - 114011 114854 114061 114907 722881 638808 - 722883 710562 

61" (155 cm) length, Heavy Duty 114052 114855 - 114908 - - - - - 




1987 thru 2006 Softail, 

1991 thru 2005 Dyna, and 

1987 thru 2006 FLH/FLT 

56" (142 cm) length 38647-98 - - - - 720412 638787 - 722897 - 

58" (147 cm) length 38665-00 - - - - 722033 638797 - 722900 722705 

60" (152 cm) length 38664-00, - - - - 235412 638763 - 722879 710846 

38617-95 

62" (157 cm) length 38607-87A, 114622 114856 114623 114978 232482 638731 - 722875 710548 

38601-89A 

64" (163 cm) length 38666-00 - - - - 721906 638792 - 722868 722703 

66" (168 cm) length - - - - - 722034 - - 722898 - 

68" (173 cm) length 38602-92, 114699 114857 - 114986 232495 638737 - 722866 710558 

38649-98 

70" (178 cm) length - 114665 114858 114624 114979 232473 638726 - 722876 722704 

72" (183 cm) length - - - - - 721915 638793 - 722869 710559 

76" (193 cm) length - 114700 114859 - 114985 232496 - - 722867 - 

FLT79 style clutch cables for 

1979 thru 1982 FLT and 

1982 FXR 

55" (140 cm) length 38599-80A - - - - 232464 638725 - 722862 710567 

63" (160 cm) length - - - - - 232465 - 235399 - - 


Clutch Cables 

CLUTCH CABLES 



Coated 

Coated 

FLT83 style clutch cables for 

1983 thru 1986 FLT and 

1983 thru 1986 FXR 

51" (130 cm) length 38599-83A - - - - 232462 638724 - 722863 710563 

57" (145 cm) length - - - - - - - - - 710564 

59" (150 cm) length - - - - - 232463 - 235421 - - 

FXD06 style clutch cables for 

2006 to present FXD, 2007 to 

present Softail and 2007 to 

present FLH/FLT 

59" (150 cm) length 38665-07 114834 114860 - 114835 232959 638745 - 232956 - 

62" (157 cm) length 38667-07 - - - - 232953 638743 - 232751 722930 

63" (160 cm) length 38664-07 114836 114861 - 114837 232955 638744 - 722837 - 

64" (163 cm) length 38787-06 - - - - 232104 638719 - - - 

65" (165 cm) length 38788-06 114838 114862 - 114839 232105 638720 - 232957 722931 

65" (165 cm) length 38666-07 - - - - 232725 638742 - - - 

68" (173 cm) length 38789-06 - - - - 232107 638721 - 232585 722932 

70" (178 cm) length - - - - - 232588 638740 - 232586 - 

72" (183 cm) length - - - - - 232589 638741 - 232587 - 

FXR87 style clutch cables for 

1987 thru 1994 FXR models 

58" (147 cm) length 36755-87A - - - - 232484 638733 - 722910 710557 

61" (155 cm) length 36753-87A - - - - 232483 638732 - 722909 710555 

64" (163 cm) length 38606-87A - - 114619 114977 232481 638730 - 722872 710552 

66" (168 cm) length - - - - - 232471 - - - - 

69" (175 cm) length - - - - - 232472 - - - - 

72" (183 cm) length - - - - - 232474 - - 722873 - 

FXST86 style clutch cables for 

1986 Softail 

47" (119 cm) length 38611-86 114323 - - 722877 638806 - 722878 - 

51" (130 cm) length 38605-86 - - - - 232480 638729 - 722870 - 



54" (137 cm) length - 114327 - - - - - - - - 

57" (145 cm) length - - - - - - - - 722871 - 

59" (150 cm) length - - - - - 232475 - - - - 


Clutch Cables 

CLUTCH CABLES 



Coated 

Coated 

XB96 style clutch cables for 

Buell models 1996 to present 

50" (127 cm) length 38696-96Y - - - - 236472 638766 - 722899 - 

XL71 style clutch cables for 

1971 thru 1985 Sportster 

38" (97 cm) length 38626-84 - - - - 232491 638736 - 722884 - 

42" (107 cm) length 38619-71B 114009 114863 - 114902 - - - - 710565 

46" (117 cm) length - - - - - 232492 - 235393 - - 

49" (124 cm) length - 114013 114864 114073 114903 - - - - 710566 

XL86 style clutch cables for 

1986 to present Sportste 

53" (135 cm) length 38619-86A 114627 114865 - 114981 232488 638734 - 722885 710550 

57" (145 cm) length 38620-96 114628 - - 114980 720411 638786 - 722887 710551 

59" (150 cm) length 38621-86A 114631 114867 - 114982 232489 638735 - 722888 710554 



61" (155 cm) length - - 114866 - - 232470 - - - - 

63" (160 cm) length - - - - - 720415 - 720423 760399 - 

67" (170 cm) length - 114632 114868 114634 114983 232469 - - 760395 - 

XR08 style clutch cables for 

2008 to present XR 1200 

Stock Length 38786-08A - - - - 760394 760393 - - - 


Throttle & Idle Cables 

THROTTLE & IDLE CABLES 



Coated 

Coated 

BT76 style throttle cables for 

1976 thru 1980 Big Twin and 


33" stock length on 1976 thru 

1980 Big Twin and Sportster models 

with single cable twist grip and Keihin 

butterfly carburetor. Cables have a 

1/4"-20 threaded 90 degree elbow on 

throttle grip end 

33" (84 cm) length, 56313-76, 114018 114869 114063 114909 722812 638798 - 722814 710518 

90 degree elbow 56314-78 

39" (99 cm) length, - 114020 - - 114910 - - - - 710519 

90 degree elbow 

41" (104 cm) length, - - 114870 - - 722813 638799 - 722815 - 



1981 thru 1985 Sportster, and 


5/16"-18 threaded elbow on throttle 

grip end, angle: 

33" (84 cm) length, 56324-81C 114210 114871 114212 114911 233121 638761 - 722822 710514 


35" (89 cm) length, 56306-88 - - - - 233078 638757 - 722803 - 


35" (89 cm) length, 56336-83, - - - - 233074 638755 - 722849 710522 

90 degree elbow 56343-88 

38" (97 cm) length, - 114214 114872 114216 114912 233123 - - 722823 710515 


40" (102 cm) length, - - - - - 233071 - 235369 - 710523 


41" (104 cm) length, - - - - - 722821 638801 235377 722823 - 


42" (107 cm) length, 56327-81B 114655 114873 114656 114958 233056 638749 - 722830 710526 


48" (122 cm) length, - 114686 114874 - 114959 233057 - 235367 - - 









Coated 

Coated 

BT81 style idle cables for 

1981 thru 1985 Sportster, 

and 1981 thru 1989 Big Twin 



33" (84 cm) length, 56323-81C 114202 114875 114204 114913 233122 638762 - 722817 710532 


35" (89 cm) length, 56305-88 - - - - 233080 638758 - 722800 - 


35" (89 cm) length, 56337-83, - - - - 233076 638756 - 722840 710538 


38" (97 cm) length, - 114206 114876 114208 114914 233124 - 235353 234519 710533 


40" (102 cm) length, - - - - - 233073 - 235371 - 710539 


41" (104 cm) length, - - - - - 722816 638800 235379 722818 - 


42" (107 cm) length, 56328-81B 114657 114877 114658 114968 233054 638748 235362 722826 710542 


48" (122 cm) length, - 114688 114878 - 114996 233055 - - 235363 - 






models 



29 1/2" (75 cm) length, 56343-90 114661 114879 - 114960 - - - - - 


32" (81 cm) length, 56356-92 114779 114780 - 114778 233066 638752 - 722851 710528 


35" (89 cm) length, 56306-90 114643 114880 114644 114951 233082 638759 - 722804 710517 


38" (97 cm) length, - 114692 114881 114693 114961 - - - - - 


40" (102 cm) length, - - - - - 722850 638804 - - - 


42" (107 cm) length, 56327-90, 114721 - - - 233058 638750 - 722827 710597 


46" (117 cm) length, - - - - - - - - - 710598 


48" (122 cm) length, - 114751 - - - 233059 - 235381 - 710525 







Coated 

Coated 

BT90 style idle cables 

for 1990 thru 1995 




29 1/2" (75 cm) length, 56342-90 114659 114882 114660 114969 - - - - 710534 


32" (81 cm) length, 56355-92 114782 114783 - 114781 233068 638753 - 722842 710544 




38" (97 cm) length, - 114690 114884 114691 114971 - - - - 710540 


40" (102 cm) length, - - - - - 722841 638802 - - 710832 


42" (107 cm) length, 56328-90, 114725 - - - 233060 638751 - 722831 710541 


46" (117 cm) length, - - - - - - - - - 710833 


48" (122 cm) length, - 114753 - - - 233061 - 235383 - 710934 



Softail 1996 to present, Dyna 

1996 to present and FLH/FLT 

1996 thru 2001 

Snap-in style 1/4" diameter elbow at 

throttle grip end, angle: 

28" (71 cm) length, 56432-98, - 114885 - - 720413 638788 - 722834 722712 


30" (76 cm) length, 56343-96, - - - - 232039 638706 - - 710591 


32" (81 cm) length, 56356-96A, 114663 114886 114616 114962 238191 638770 - 722854 710593 

90 degree elbow 56343-01, 

56421-06 

34" (86 cm) length, - - - - - 720417 - 720425 760402 710592 


35" (89 cm) length, 56306-96 114713 - 114714 114952 238193 638771 - 722805 710589 


38" (97 cm) length, - 114694 114887 114621 114963 238192 - - 722848 - 


40" (102 cm) length, - - - - - 722853 638805 - 722855 - 


41" (104 cm) length, - - - - - 238194 - 238206 760401 - 


42" (107 cm) length, 56327-96 114723 - - - 238187 638768 - 722828 722707 


44" (112 cm) length, 56379-96 - - - - - - - 722858 - 


48" (122 cm) length, - - - - - 238188 - - 722859 722708 


50" (127 cm) length, - - - - - 722836 638820 - 722829 - 









Coated 

Coated 




Softail 1996 to present, Dyna 

1996 to present and FLH/FLT 

1996 thru 2001 WITHOUT 

Cruise Control 



28" (71 cm) length, 56433-98, - - - - 720414 638789 - 722835 722726 

90 degree elbow 56634-06, 

56637-06 

30" (76 cm) length, 56342-96, - - - - 232049 638715 - - 722725 


32" (81 cm) length, 56355-96A, 114731 114888 114732 114975 238417 638775 - 722845 710828 


34" (86 cm) length, - - - - - 720418 - 720426 - 710827 




38" (97 cm) length, - 114762 114890 114763 114976 238418 - - 722839 710824 


40" (102 cm) length, - - - - - 722844 638803 - 722846 - 


41" (104 cm) length, - - - - - 238420 - 238432 760400 - 


42" (107 cm) length, 56328-96 114727 - - - 238413 638774 - 722832 722721 


44" (112 cm) length, 56368-96 - - - - - - - 722927 - 


48" (122 cm) length, - - - - - 238414 - 238426 722857 722722 


50" (127 cm) length, - - - - - 722719 638821 - 722833 - 


FLH02 style throttle cables 

for 2002 thru 2007 FLH and 

FLT series models 

41" (104 cm) length, 56376-02 - - - - 232008 638703 - - - 


40" (102 cm) length, 56357-02, - - - - 232009 638704 - - 722714 


46" (117 cm) length, - - - - - - - - - 722715 







Coated 

Coated 

FLH02 style idle cables for 

2002 thru 2007 FLH and FLT 

series models WITHOUT 

Cruise Control 

40" (102 cm) length, 56362-02 - - - - 232043 638710 - - - 


45" (114 cm) length, - - - - - - - - - 722730 


FLH style idle cables for 

1996 thru 2007 FLH and FLT 

models with Cruise Control 

37" (94 cm) length, 56237-99A - - - - 232044 638711 - - 722731 


38" (97 cm) length, 56358-02 - - - - 232048 638714 - 723101 722736 


39" (99 cm) length, 56622-02 - - - - - - - - 722728 


41" (104 cm) length, 56293-03, - - - - 232046 638713 - - 722933 


43" (109 cm) length, 56358-96 - - - - 723100 638809 - - 722733 


VR02 style throttle cables 

for 2002 to present 

V-Rod models 

29" (74 cm) length, 56984-07 - - - - 232509 638738 - - - 


29" (74 cm) length, 56593-04 - - - - 232042 638709 - - 722699 


30" (76 cm) length, 56365-01 - - - - 232041 638708 - - 722718 


36" (91 cm) length, - - - - - 738814 638814 - - - 


VR02 style idle cables 


V-Rod models 

29" (74 cm) length, 56985-07 - - - - 232512 638739 - - - 


29" (74 cm) length, 56594-04 - - - - 232103 638718 - - 722739 


30" (76 cm) length, 56367-01 - - - - 232059 638717 - - 722740 


36" (91 cm) length, - - - - - 738815 638815 - - - 


XB96 style throttle cables for 

1996 thru 1998 Buell models 

32" (81 cm) length 56429-96Y - - - - 236470 638764 - - - 

XB96 style idle cables for 

1996 thru 1998 Buell models 

32" (81 cm) length 56430-96 - - - - 236471 638765 - - - 








Coated 

Coated 

XL86 style throttle cables for 

1986 and 1987 Sportster 

models 

32" (81 cm) length, 56308-86 - - - - 233050 638746 - 722806 710527 


38" (97 cm) length, - - - - - 233051 - 235356 760403 - 


XL86 style idle cables for 

1986 and 1987 Sportster 

models 

32" (81 cm) length, 56309-86 - - - - 233052 638747 - 722809 710543 


38" (97 cm) length, 130 degree elbow - - - - - 233053 - 235357 760404 - 



XL88 style throttle cables 

for 1988 thru 1995 




36" (91 cm) length, - 114678 114892 114679 114955 232476 - 235359 722874 710521 



XL88 style idle cables for 1988 

thru 1995 Sportster models 



36" (91 cm) length, 

130 degree elbow - 114684 114894 114685 114970 232477 - 235361 722799 710537 


1996-2006 Sportster models 

30" (76 cm) length, 56400-96, 114649 114895 114650 114956 721904 638790 - 722860 710834 


32" (81 cm) length, 56381-96 - - - - 238185 638767 - 722808 710838 



90 degree elbow - - - - - - - - - 710837 


130 degree elbow - 114680 114896 - 114998 721909 638818 721908 760396 710835 


130 degree elbow - - - - - 238186 638816 238198 751256 710839 






Coated 

Coated 





32" (81 cm) length, 56382-96 - - - - 238411 638773 - 722811 710844 



90 degree elbow - - - - - - - - - 710843 




130 degree elbow - - - - - 238412 638817 238424 760398 710845 

30" (76 cm) length, 56884-07 116100 116103 - 116102 723102 638810 - 723104 760409 


36" (91 cm) length, - 116105 116108 - 116107 751130 638812 - 751132 760410 



30" (76 cm) length, 56885-07 116110 116113 - 116112 723103 638811 - 723105 760411 


36" (91 cm) length, - 116115 116118 - 116117 751131 638813 - 751133 760412 


XR08 style throttle cables for 


Stock length 56637-08 - - - - 760389 760391 - - - 

XR08 style Idle cables for 


Stock length 56639-08 - - - - 760390 760392 - - - 





THROTTLE AND IDLE CABLES FOR USE WITH AFTERMARKET CARBURETORS 

Zodiac Zodiac Zodiac Barnett Barnett Barnett Barnett 

Black Braided Clear Coated Black Stealth Braided Clear Coated 

Throttle cables for use with Mikuni HS40 carburetor and 1986 thru 1995 style throttle grip 

37" (94 cm) length, 130 degree elbow 232208 - 114946 - - - - 

41" (104 cm) length, 130 degree elbow 232211 - 114945 - - - 722890 

47" (119 cm) length, 130 degree elbow 232206 - 114947 - - 233972 760405 

Idle cables for use with Mikuni HS40 carburetor and 1986 thru 1995 style throttle grip 




Throttle cables for use with Mikuni HS40 carburetor and 1996 to present snap-in style throttle grip 

41" (104 cm) length, 90 degree elbow - - - 232037 638705 - 722889 

47" (119 cm) length, 90 degree elbow - - - 232038 - - - 

Idle cables for use with Mikuni HS40 carburetor and 1996 to present snap-in style throttle grip 



Throttle cables for use with early Mikuni HSR42 and HSR45 carburetors and 1986 thru 1995 style threaded throttle grip 

Early HSR42 and HSR45 carbs have the cable wheel on the left side 

Current available HSR42 and HSR 45 carburetors have the cable wheel on the right side for use with BT86 style cables 

31" (79 cm) length, 130 degree elbow 114557 - 114939 - - - - 


38" (97 cm) length, 130 degree elbow 114559 - 114941 - - 233976 722894 

Idle cables for use with early Mikuni HSR42 and HSR45 carburetors and 1986 thru 1995 style threaded throttle grip 





38" (97 cm) length, 130 degree elbow 114560 - - - - 233978 722896 

Throttle cables for use with early Mikuni HSR42 and HSR45 carburetors and 1996 snap-in style throttle grip 




41" (104 cm) length, 90 degree elbow - - - 232262 - 232186 760407 

Idle cables for use with early Mikuni HSR42 and HSR45 carburetors and 1996 snap-in style throttle grip 





Throttle cables for use with Mikuni HSR carburetors on 1997 to present Buell models 

32" (81 cm) length - - - 232006 - - - 

Idle cables for use with Mikuni HSR carburetors on 1997 to present Buell models 

32" (81 cm) length - - - 232007 - - - 

Throttle cables for use with SU, Bendix, S&S Super B and Super D carburetors and 1986 thru 1995 threaded throttle 

44" (112 cm) length, 130 degree elbow - - - 231889 638700 - - 

Idle cables for use with SU, Bendix, S&S Super B and Super D carburetors and 1986 thru 1995 threaded throttle 


Throttle cables for use with S&S Super E & Super G carburetors and 1986 thru 1995 style threaded throttle 

S&S Super E and Super G carburetors manufactured before October 2000 with serial numbers that start with A must be used with these cables. 

Later carburetors have a cable bracket like ZPN 750036, allowing the use of OEM style cables. 

Throttle cables have a 5/16"-18 threaded elbow on the throttle grip end 



Idle cables for use with S&S Super E & Super G carburetors and 1986 thru 1995 style threaded throttle 



Idle cables have a 1/4"-20 threaded elbow on the throttle grip end 



Throttle cables for use with S&S Super E & Super G carburetors and 1996 to present snap-in style throttle 



Throttle cables have a 1/4" snap-in elbow on the throttle grip end 


38" (97 cm) length, 90 degree elbow - 114720 114957 710292 638782 238208 722905 

44" (112 cm) length, 90 degree elbow - - - 710296 638784 710298 722906 

Idle cables for use with S&S Super E & Super G carburetors and 1996 to present snap-in style throttle 



Idle cables have a 7/32" snap-in elbow at the throttle grip end 




Throttle cables for Buells with S&S Super E & Super G carburetors 

38" (97 cm) length for use on models with 7/8" (22 mm) handlebars - - - 235523 - - - 

38" (97 cm) length for use on models with 1" (25.4 mm) handlebars - - - 235525 - - - 

Idle cables for Buells with S&S Super E & Super G carburetors 




Chapter 14 

Designed by Zodiac, these 1” 

handlebars stand out from the 

crowd 

Chapter 14 is all about handlebars and everything 

that’s bolted to the handlebars such as grips, levers, 

control cables, risers, handlebar clamps and much 

more. No matter if you are looking for a stock 

replacement or custom handlebar, in diameters from 

1”, 1 1/4” or even Mucho-Fatzo 1 1/2” thick, you will 

find them in this section. This section also shows 

various types of handlebar controls. Stock replacement 

controls, custom style controls as well as billet 

aluminum controls from Zodiac, Performance Machine, 

Kustom Tech and Arlen Ness. Many new products are 

introduced in this catalog such as new handlebars from 

Zodiac, Biltwell, Roland Sands Design,Arlen Ness and 

Fehling, grips fromArlen Ness, KustomTech and Cycle 

Kraft, loads of different riser designs and Barnett 

“Stealth” clutch, throttle and idle cables, which feature 

black casings, as well as all-black cable adjusters 

instead of the regular chrome hardware. 

Rugged and comprehensive handlebar 

mounting kit with 5 Volt USB connector to 

secure, power and charge 

your smartphone 

device on your 

bike 

New handlebars 

from Biltwell come 

in chrome and black in 

many, many different styles 

Cycle Kraft’s “Neo 

Fusion” grips by Ken’s 

Factory of Japan 

feature outstanding 

designs and come in black, 

polished aluminum or satin 

finish bronze

Handlebars/Handlebar Risers 


ZODIAC'S X-TREME BAGGER BARS 

Great looking bars exclusively made in Europe for Zodiac.They are 1" 

in diameter and feature dimples and slots for internal wiring, and are 

also knurled to give risers a firm grip. These bars are great for Electra 

Glides and other models equipped with a Batwing fairing. Also great 

to add Bagger styling to any other Big Twin or Sportster. Bars have an 

11" (28cm) center width, are 39" (99cm) wide and have a 6 3/4" 

(17cm) pullback.Available in chrome or black powder coat. 

Chrome Black Rise 

732030 732031 8" (20cm) 

732032 732033 10" (25cm) 

732034 732035 12" (30cm) 

732036 732037 14" (36cm) 

TOMAHAWK HANDLEBARS 

Designed by Zodiac, these 1" handlebars stand out from the crowd. 

All handlebars are knurled for use with regular or Springer handlebar 

clamps. Available in raw steel, black powder coated or with a triple 

plated chrome finish. Slotted for internal wiring. Chrome handlebars 

come with black end caps, black handlebars with chrome end caps and 

raw handlebars with raw endcaps.Endcaps are also available separately 

and can be used for most 1" diameter handlebars. All Tomahawk 

handlebars are 30" (77cm) wide, have a 6 1/2" (16.5cm) center width 

and a 4" (10cm) pull back. 

Rise End Rise 

096603 Chrome 7 1/2" (19cm) 3 1/2" (9cm) 

096609 Chrome Springer 7 1/2" (19cm) 3 1/2" (9cm) 

096604 Black 7 1/2" (19cm) 3 1/2" (9cm) 

096610 Black Springer 7 1/2" (19cm) 3 1/2" (9cm) 

096605 Raw 7 1/2" (19cm) 3 1/2" (9cm) 

096611 Raw Springer 7 1/2" (19cm) 3 1/2" (9cm) 

096600 Chrome 12" (30cm) 6 1/4" (16cm) 

096606 Chrome Springer 12" (30cm) 6 1/4" (16cm) 

096601 Black 12" (30cm) 6 1/4" (16cm) 

096607 Black Springer 12" (30cm) 6 1/4" (16cm) 

096602 Raw 12" (30cm) 6 1/4" (16cm) 

096608 Raw Springer 12" (30cm) 6 1/4" (16cm) 

096613 Domed end cap, chrome, set of 4 

096614 Domed end cap, black, set of 4 

096615 Domed end cap, raw, set of 4 

BILLET ALUMINUM ROUND TOP RISERS 

Tapered style billet aluminum risers are a timeless design. They come 

complete with top covers and allen head top cover screws.They are sold 

in pairs, 2" (5.1cm) high and threaded for use with 1/2-20 UNF riser 

bolts ZPN 233382. 

241028 Chrome 


ROLAND SANDS 

NOSTALGIA RISERS FOR 

1 1/4" HANDLEBARS 

Nostalgia style 4-bolt risers for 

use with 1 1/4" (32mm) 

handlebars.Risers are tapped for 

use with 1/2-13 UNC mounting 

bolts, such as ZPN 233383. 

Risers are 1 1/2" (3.8cm) high 

and sold in pairs. 


740839 Chrome 



Handlebar Parts/Grip Sets 

ARLEN NESS THROTTLE 

HOUSINGS 

Throttle housings are designed for use with 

1982 thru 1995 single throttle cables. Also 

available as "false" housing for the left side 

to balance the looks of your handlebars. 

Radius and Grooved style are chrome billet 

aluminum, Coned style is die cast chrome. 

Selected models are available with a built-in 

momentary push button switch. 

A20283 Radius style 

A20287 Radius style with switch 

A20275 

Radius false housing 

with switch 

A20297 Grooved with switch 

A20278 Grooved false housing with 

switch 

A20298 Coned style 

MÜLLER'S INTERNAL THROTTLE 

KIT 

The Müller internal throttle is engineered to 

perfection and made from top of the bill 

materials.It features a total of 4 ball bearings, 

two for each side of the spiral and two slide 

bearings. Together with the included Teflon 

lined throttle cable this makes it the easiest 

turning internal throttle on the market. Cable 

is 53" (135 cm) long and can be shortened 

to the required length. To make installation 

easy an installation tool kit is available 

separately.The toolkit includes a drill & tap jig, 

clamping screw and 6.5 mm drill.The Müller 

internal throttle is available in a normal 

version, as well as one with an open-end 

version to allow for the installation of 

Kellermann and similar handlebar end turn 

signals. 

744330 Muller internal throttle kit 

744331 Muller internal throttle kit for 

Kellerman turn signal 

744332 Installation tool & jig kit 

ARLEN NESS COMFORT GRIPS 

Conical aluminum billet grip bodies with 

innovative rubber inserts that have a soft air 

cushion feel that dampens vibration for a 

comfortable ride. Grips have a slightly larger 

outer diameter than stock, which helps with 

carpal tunnel syndrome and hand fatigue 

during long rides. 

Fits all 1976 to present single 

and dual cable operated throttle 

models, except those with 


A07050 Chrome 

A07051 Black 

Fits all 2008 to present Touring 

and other models with throttleby-wire 

A07052 Chrome 

A07053 Black 


RUBBER GRIPS WITH CHROME 

FLAMES 

The rubber on these awesome looking grips 

protrude through the chrome flames to give 

a very good grip. Available to fit all 1973 to 



handlebar air reservoirs. Also available for 

2008 and later "Fly-By-Wire" equipped 

Touring models. Sold in pairs. 

351080 Fits all 1973 to present models 

with cable operated throttle 

351079 Fits all 2008 to present Touring 

models and other "Fly-By- 

Wire" equipped models 




ARLEN NESS RAD III HANDLEBAR CONTROLS 

Arlen Ness introduces the industry's first factory replacement full custom 

hand controls. The RAD III controls are guaranteed to give your stock 

handlebars a great new look. Complete kits include master cylinder 

with brake lever and clutch perch with lever that work with your 

OEM switch housings. Available for single or dual disc 1996 thru 

2007 models with cable operated clutch and 2008 to present dual disc 

Touring models. Any of our Arlen Ness mirrors and grips are a great 

addition to these kits 

Chrome Black 

A08895 A08890 Kit for Single Disc models, includes 9/16" 


A08896 A08891 Kit for Dual Disc models, includes 11/16" 



models, includes 15mm Master Cylinder 

Individual components 

Chrome Black 

A08740 - 9/16" Brake Master Cylinder (includes 

lever) 

A08741 - 11/16" Brake Master Cylinder 

(includes lever) 

A08860 - 15mm Brake Master Cylinder with lever 

A08743 - Cable clutch perch with lever 

A08750 - Replacement Clutch Lever 

A08751 - Replacement Brake Lever 

A08752 - Replacement Brake Master Cylinder Cover 

370198 - Standard switch housing set 

A08739 - 




A08865 15mm Complete Rebuild Kit 

Switch housing set with Radio & Cruise 

Control 

CHROME HANDLEBAR CONTROLS FOR TOURING 

MODELS 

Chrome brake and clutch controls to replace those dull black handlebar 

controls on all 2008 to present Touring models with cable operated 

clutch. Kit includes complete clutch lever assembly and 15mm bore 

front brake master cylinder for use with the stock Brembo brake calipers 

on ABS and non-ABS equipped models. A chrome switch housing kit 

for use on models with Audio and Cruise Control is available separately. 


370288 Chrome switch housing kit for Audio & Cruise 

Control (OEM71813-09) 









HAS BEEN ON DOT 5 (AND VISA VERSA) 










SWITCH HOUSING KITS 

Reproduction of the Original Equipment handlebar switch housings. 

Accepts both OEM and aftermarket switches without re-wiring. Zodiac 

has four versions available, early style, late style that has extra holes in 

the left side switch housing to accommodate for the Clutch Interlock 

system as introduced on the 2007 models, an audio & cruise control 

style, 2011 to present Softail and 2012 to present Dyna style. 

054001 Early style, fits 2002 thru 2006 V-Rod models and 

1996 thru 2006 Sportster, Dyna, Softail (except 

FXSTDSE) and FLHR Road King (except FLHRSEI) models 

(OEM 70222-96) 

370198 Late style, fits 2007 to present V-Rod models, 2007 to 

present Sportster, Dyna, Softail (except FXSTDSE) and 

FLHR Road King (except FLHRSEI) models 

(OEM 70222-96) 

370288 Chrome, audio & Cruise Control style, fits 1996 to 

present FLHTCU, 2010 to present FLHTK, 

1998-2009 FLTR, 2011 to present FLTRU, 2002 to 

present FLHRC and 2009 to present FLHTCUTG.Will also 

fit Cruise Control equipped 2002 to present FLHR 

(OEM 71813-09) 

370870 Chrome, fits 2011 to present Softail and 2012 to 

present Dyna (OEM 71826-11) 

370875 Black, fits 2011 to present Softail and 2012 to 

present Dyna (OEM 72920-11, 72921-11, 72922-11 & 

72923-11) 

239373 Chrome screw kit for 1996-up late style switch housings 

CHROME HANDLEBAR SWITCH CAP KITS 

These chrome switch caps are easy to install and add a real highlight 

to your handlebar controls. Unlike the stock black switch caps they 

have embossed logos, so their function stays visible for years and years. 

Kits include caps for all handlebar switches, a special tool and detailed 

instructions how to remove those stock dull black caps and replace 

them with these chrome beauties. 

370852 Fits 1996 thru 2010 Softail, 1996 thru 2011 Dyna, 

1996 to present V-Rod, Sportster and FLHR, except those 

with Cruise Control (OEM 71804-03) 

370850 Fits 1996 to present FLHTCU and FLHTK 

(OEM 71802-03) 

370851 Fits 1996 to present FLHT and FLHTC (OEM 71803-03) 

370853 Fits 2002 to present FLHRCI (OEM 71808-03) 

370854 Fits 1996 to present FLHT, FLHTC, 2006 to present FLHX 

and 1996 to present FLHR with Cruise Control 

(OEM 71816-09) 




Fits 2007 thru 2010 Softail, 

2007 thru 2011 Dyna, 2007 to 

present Sportster, V-Rod and 

Touring models without audio 

and/or cruise control 

370453 Chrome LED switch kit 

370454 Black LED switch kit 


LED LIGHTED HANDLEBAR 

SWITCH KITS 

The coolest handlebar switches for your stock 

left and right handlebar switch housings to 

date.They feature LED backlight displays for 

all function symbols, so are ideal for those 

late night rides. Kits come with 60" long 

wires and complete with terminals. 

Fits 1996 thru 2006 FLH and FLT 

series Touring models with 

audio 

370443 Chrome LED switch kit with 

audio controls 


audio & cruise control 

370444 Black LED switch kit with audio 

controls 


& cruise control 


series Touring models with 

audio 


audio controls 


audio & cruise control 


controls 


& cruise control 

HANDLEBAR WIRING 

EXTENSIONS FOR 1996 TO 

PRESENT MODELS 

Ideal for when the stock wiring is too short to 

mount your Ape hangers. To take the guess 

out of your work these wires are identical 

color coded as OEM equipment and have the 

contact pins already fitted so you can easily 

mount them in the stock connector housings. 

Crimp-on cable connectors are also included. 

Fits all 1996 thru 2006 models, 

except those with radio controls 

370940 4" (10cm) extension kit 





Fits 1996 thru 2006 Sportster, 

Softail and Dyna, 2002 thru 

2006 V-Rod as well as 1996 thru 

2006 Touring models without 

audio and/or cruise control 

370455 Chrome LED switch kit 

370456 Black LED switch kit 

Fits 2007 thru 2010 Softail, 


2007 to present Sportster, 

Touring and V-Rod models, 

except those with radio controls. 

For 2008 to present Touring 

models a wiring extension kit 

for the throttle-by-wire system 

must be ordered separately. 







Hand Shifter Ornaments/Handlebar Controls 

"THE FACTORY" CAST SHIFTER ORNAMENTS 

Hand cast from brass or aluminum by "The Factory" using traditional 

casting methods. Originally designed as a knob for hand shift models, 

but nobody is keeping you from putting it somewhere else on your bike. 

These ornaments have a threaded hole at the bottom. Great vintage 

looks that can be combined with other cast covers from "The Factory" 

found elsewhere in this catalog. Ornaments are, like almost any part 

from "The Factory", attractively packed in a true Old Skool wooden 

box. 

735464 Frankenhead, brass, height 3 3/4" (9.5cm) 

735491 Frankenhead, aluminum, height 3 3/4" (9.5cm) 

735466 Virgin Mary, brass, height 3" (7.5cm) 

735493 Virgin Mary, aluminum, height 3" (7.5cm) 

735469 Jaws, brass, height 2" (5.4cm) 

735496 Jaws, aluminum, height 2" (5.4cm) 

735520 Indian, brass, height 4" (10cm) 

735521 Indian, aluminium, height 4" (10cm) 

735522 Skull, brass, height 2 1/2" (6.5cm) 

735523 Skull, aluminium, height 2 1/2" (6.5cm) 

735526 Mexican Skull, brass, height 2 3/4" (7cm) 

735527 Mexican Skull, aluminum, height 2 3/4" (7cm) 

735528 8-Ball, brass, height 2 3/4" (7cm) 

735529 8-Ball, aluminum, height 2 3/4" (7cm) 

735530 Flying Eyeball, brass, height 3" (7.5cm), width 

6 3/8" (16cm) 

735531 Flying Eyeball, aluminum, height 3" (7.5cm), 

width 6 3/8" (16cm) 


NESS MASTER CYLINDER COVERS 

Available for most popular front and rear applications 

Includes chrome hardware 

Made from billet aluminum with a chrome or black anodized finish 

Engraved Engraved Deep Deep Retro Slot Slot Beveled Beveled 

Cut Cut Track Track 

Front master cylinder covers Chrome Black Chrome Black Chrome Chrome Black Chrome Black 

2006 to present Sportster - - - - - - - A03470 A03471 

2005 thru 2007 Touring and2006 to present Softail & Dyna 

A03440 A03441 A03452 A03453 A03448 A03413 A03417 A03405 A03409 

2008 to present Touringand 2006 V-Rod 

A03442 A03443 A03454 A03455 A03449 A03412 A03416 A03404 A03408 

Rear master cylinder covers 2006 to present Sportster 

- - - - - - - A03475 A03476 

2005 thru 2007 Touring and 2006 to present Softail & Dyna 

A03444 A03446 A03456 A03457 A03450 A03414 A03418 A03406 A03410 

2008 to present Touring A03445 A03447 A03458 A03459 A03451 A03415 A03419 A03407 A03411 


Handlebar Controls/Control Cables 

NESS BILLET CABLE CLAMPS 

Radius or Grooved design Clean mounting 

for various cable applications Chrome plated 

CNC machined billet aluminum 1 1/2" 

diameter works great on Dyna frames 


HANDLEBAR MASTER CYLINDER 

REBUILD KITS 

Complete master cylinder rebuild kits for most 

models. Cups and O-rings are made of 

synthetic rubber to prevent swell. 

Fits Sportster & FX 1973-1981 & 

FL 1972-1981 (OEM45063-72) 

148015 Mastercylinder repair kit 

(OEM45063-72) 

PM CONTOUR BILLET ALUMINUM 

THROTTLE HOUSING 

Gloppy throttle housings have ruined a fair 

share of bikes, that's why PM designed this 

one as a perfect match with their Contour 

handlebar controls.Available for single cable, 

dual cable or dual cable snap-in in polished 

or black anodized. 

Single cable Contour throttle 

housing, can be used with all 

1981 thru 1995 stock and stockstyle 

throttle cables 


740560 Black 

Dual cable Contour throttle 

housing, can be used with all 

1981 thru 1995 stock and stockstyle 

throttle and idle cables 


740570 Black 

Dual cable snap-in Contour 

throttle housing, can be used 

with all 1996 to present stock 

and stock-style throttle and idle 

cables 


740571 Black 

FOLDING QUICK-CLAMPS 

These folding clamps are easy to install on 

any 1" or 1 1/4" (25.4 or 31.8mm) diameter 

round tube, including most handlebars.They 

feature a small hinge to make installation 

easy and without bending. Rubber inserts are 

included to avoid rotating and they have a 

hole that accepts #10 or M5 bolts to secure 

whatever you want. 

370420 Chrome quick-clamp 

370421 Black quick-clamp 

SMARTPHONE HANDLEBAR 

MOUNT 

A rugged and comprehensive handlebar 

mounting kit with 5 Volt USB connector to 

secure, power and charge your smartphone 

device on your bike. Features RAM Mounts 

adjustable ball-and-socket design, which is 

vibration and wind resistant. Intended for 

gauge display and hands free usage while 

operating vehicle, Never use mobile 

computing or communication equipment 

while your vehicle is in motion. 

747455 Smartphone handlebar mount 

with USB adapter 

Radius Design 

A03165 1" (25.4mm) to clutch cable 

A03166 1 1/8" (28.5mm) to 

clutch cable 

A03167 1 1/4" (31.3mm) to clutch 

cable 

A03161 1 3/8" (35mm) to clutch 

cable 

A03164 1 1/2" (38mm) to clutch cable 

A03168 1" (25.4mm) to throttle & idle 

cable 

A03163 1 1/4" (31.3mm) to throttle & 

idle cable 

A03169 1" (25.4mm) to throttle & idle 

cable 

A03162 1 1/4" (31.3mm) to 

throttle & idle cable 

Grooved Design 

A03175 1" (25.4mm) to clutch 

cable 

A03176 1 1/8" (28.5mm) to 

clutch cable 

A03177 1 1/4" (31.3mm) to 

clutch cable 

A03174 1 1/2" (38mm) to clutch cable 

A03178 1" (25.4mm) to single 

throttle cable 

a03173 1 1/4" (31.3mm) to single 

throttle cable 

A03179 1" (25.4mm) to throttle 

& idle cable 



CONTROL CABLES FOR HARLEY- 

DAVIDSON & BUELL 

Zodiac offers a wide selection of control cables 

for almost any type/model Harley-Davidson, 

Buell or Custom built motorcycles. Cables are 

available in three different brands: Zodiac, 

Barnett and Magnum Shielding. 


We have grouped cables by application. Check 

in the application list what throttle, idle or clutch 

cable style and stock length you need for your 

model and than choose a cable from the cable 

listing.The lengths given are approximately and 

measured end to end of the visible outer cable 

and do not include the end fittings. 

Throttle and idle cables come with 90 or 

130 degree elbows. The 90 degree elbows add 

approx. 3 1/2" (8.9cm) to the cable length, 

130 degree elbows add approx. 5" (12.7cm) to 

the cable length. Do not mix 90 and 130 degree 

elbows for throttle and idle on the same 

motorcycle. 


Zodiac control cables high quality cables at 

very competitive prices. 

A. Zodiac Black: Stock replacement cables with 

a black vinyl covered outer cable 

B. Zodiac Braided: Same cables as above but 

with a Braided Stainless Steel covered outer 

C. Zodiac Clear Coated: Clear vinyl covered 

Braided Stainless Steel outer cable 

D. Barnett Black: American made stock 

replacement black vinyl covered outer cable 

E. Barnett Braided: American made classic 

stainless steel braid covered outer cable 

F. Barnett Clear Coated: American made clear 

vinyl covered stainless steel braid outer cable 

G. Magnum Sterling Chromite: American 

made cables with a braided steel outer cable. 

Every strand of wire used for this braid is 

individually chrome plated for a super shiny 

appearance.Sterling Chromite cables and lines 

feature crystal clear Teflon outer jacket offering 

exceptional protection against scuffing paint 

and will never discolor. 

H. Barnett Stealth: American Made totally 

black cables with black elbows and black 

adjusters 







Buell models 

M2 1997 to present XB96 50" XB96 32" Buell 

S1 & S3 1996-1998 XB96 50" XB96 32" Buell 

X1 1999 to present XB96 50" XB96 32" Buell 


XLCH 1971-1973 XL71 42" use ZPN 114184 + ZPN 114183 

XLCH 1974-early 1976 XL71 42" BT76 33" 90 degree 

XLCH late 1976-1979 XL71 42" BT76 33" 90 degree 

XLCR 1977-1978 XL71 38" BT76 33" 90 degree 










XL 1200L Low 2007-up XL86 59" XL07 30" 130 degree 

XL 1200N Nightster 2008-up XL86 59" XL07 30" 130 degree 

XL 1200R 2004-2006 XL86 53" XL96 30" 130 degree 

XL 1200R 2007-up XL86 53" XL07 30" 130 degree 

XL 1200S Sport 2001 XL86 53" XL96 30" 130 degree 

XL 1200S Sport 2002-2003 XL86 57" XL96 30" 130 degree 

XL 1200V Seventy-Two 2012-up XL86 63" XL07 34" 130 degree 

XL 1200X Forty-Eight 2012-up XL86 53" XL07 30" 130 degree 

XLH 1971-1973 XL71 42" Use cable 114183 + 114184 

XLH 1974-early ‘76 XL71 42" BT76 33" 90 degree 

XLH 1981-1985 XL71 42" BT81 41" 130 degree 

XLH 50 Anniversary 2007 XL86 53" XL07 30" 130 degree 



XLH 883 Deluxe 1987 XL86 53" XL86 32" 130 degree 

XLH 883 Deluxe 1988-1995 XL86 53" XL88 30" 130 degree 





XL 883 Std. 2004-2006 XL86 53" XL96 30" 130 degree 

XL 883 Std. 2007-up XL86 53" XL07 30" 130 degree 

XL 883C Custom 1999 XL86 53" XL96 30" 130 degree 




XL 883L Low 2002-2006 XL86 53" XL96 30" 130 degree 

XL 883L Low, SuperLow 2007-up XL86 53" XL07 30" 130 degree 

XL 883N Iron 2007-up XL86 53" XL07 30" 130 degree 

XL 883R Roadster 2002-2003, 2006 XL86 53" XL96 30" 130 degree 

XL 883R Roadster 2007-up XL86 53" XL07 30" 130 degree 

XLH Hugger 1988-1995 XL86 59" XL88 30" 130 degree 

XLH Hugger late 1987 XL86 59" XL86 32" 130 degree 

XLH late 1976-1980 XL71 42" BT76 33" 90 degree 

XLS Roadster 1979 -1980 XL71 38" BT76 33" 90 degree 



XLT 1977 XL71 42" N/A N/A - 

XLX 1983-1985 XL71 38" BT81 41" 130 degree 

XR1000 (All) XL71 38" N/A N/A - 

XR 1200 2008-2010 XR08 - XR08 - - 

XR 1200X 2008-up XR08 - XR08 - - 


ELF (with mousetrap) 1952 BT52 30" Use cable 114183 + 114184 




FL models with mousetrap 1952-1967 BT52 30" Use cable 114183 + 114184 

FLD Switchback 2012-up FXD06 65" BT96 32" 90 degree 

FLHR Road King 1994-1995 BT87 62" BT90 42" 90 degree 

FLHR Road King 1996-2001 BT87 62" BT96 44" 90 degree yes 

FLHR Road King 2002-2006 BT87 62" FLH02 41" 90 degree yes 

FLHR Road King 2007 FXD06 62" FLH02 41" 90 degree yes 

FLHR Road King 2008 FXD06 62" Note: 2008 and later Touring models do not use throttle,- and idle cables 



FLHRC Road King Classic 2002-2006 BT87 62" FLH02 41" 90 degree yes 

FLHRC Road King Classic 2007 FXD06 62" FLH02 41" 90 degree yes 

FLHRC Road King Classic 2008-up FXD06 62" Note: 2008 and later Touring models do not use throttle,- and idle cables 

FLHRP 1996-2001 BT87 62" BT96 44" 90 degree 

FLHRS 2004-2006 BT87 62" BT96 44" 90 degree yes 

FLHRS 2007 FXD06 62" BT96 44" 90 degree yes 

FLHRS 2008-up FXD06 62" Note: 2008 and later Touring models do not use throttle,- and idle cables 


FLHS Electra Glide Sport 1989 BT87 62" BT81 42" 90 degree 


FLHT Electra Glide 1983 FLT83 51" BT81 33" 130 degree 

FLHT Electra Glide 1984-1986 FLT83 51" BT81 42" 90 degree 









FLHT Electra Glide 2002 BT87 62" FLH02 41" 90 degree yes 

FLHT Electra Glide 2003-2005 BT87 62" FLH02 41" 90 degree yes 

FLHT Electra Glide 2007 FXD06 62" FLH02 40" 90 degree yes 

FLHTC Electra Glide Classic 1983 FLT83 51" BT81 33" 130 degree 

FLHTC Electra Glide Classic 1984-1986 FLT83 51" BT81 42" 90 degree 


FLHTC Electra Glide Classic 1989 BT87 62" BT81 42" 90 degree 


FLHTC Electra Glide Classic 1996-2001 BT87 62" BT96 44" 90 degree yes 

FLHTC Electra Glide Classic 2002-2006 BT87 62" FLH02 41" 90 degree yes 

FLHTC Electra Glide Classic 2007 FXD06 62" FLH02 40" 90 degree yes 

FLHTC Electra Glide Classic 2008 FXD06 62" Note: 2008 and later Touring models do not use throttle,- and idle cables 

FLHTC-SE Electra Glide Classic 2004-2005 hydraulic FLH02 40" 90 degree yes 

FLHTCU Ultra Classic Electra Glide 1989 BT87 62" BT81 42" 90 degree 



FLHTCU Ultra Classic Electra Glide 2002-2006 BT87 62" FLH02 41" 90 degree yes 

FLHTCU Ultra Classic Electra Glide 2007 FXD06 62" FLH02 40" 90 degree yes 

FLHTCU Ultra Classic Electra Glide 2008-up FXD06 62" Note: 2008 and later Touring models do not use throttle,- and idle cables 



FLHX Street Glide 2008-up FXD06 62" Note: 2008 and later Touring models do not use throttle,- and idle cables 

FLS Softail Slim 2012-up FXD06 59" BT96 28" 90 degree 

FLST Heritage Softail 1986 FXST86 47" BT81 33" 130 degree 

FLST Heritage Softail 1987-1989 BT87 62" BT81 33" 130 degree 

FLST Heritage Softail 1990 BT87 62" BT90 32" 90 degree 

FLST Heritage Softail 2007-up FXD06 65" BT96 33" 90 degree 




FLSTC Heritage Softail Classic 2000 BT87 64" BT96 32" 90 degree 


FLSTC Heritage Softail Classic 2007-up FXD06 65" BT96 32" 90 degree 



FLSTF Fat Boy 2000 BT87 64" BT96 32" 90 degree 


FLSTF Fat Boy 2007-up FXD06 65" BT96 32" 90 degree 

FLSTF-SE Fat Boy 2005-2006 BT87 64" BT96 32" 90 degree 




FLSTN Softail Deluxe 2007-up FXD06 65" BT96 32" 90 degree 


FLSTS Heritage Springer 2000 BT87 64" BT96 32" 90 degree 


FLSTSB Cross Bones 2008-up FXD06 65" BT96 32" 90 degree 

FLSTSC Heritage Softail Springer 2005-2006 BT87 64" BT96 32" 90 degree 

FLSTSC 2007-up FXD06 65" BT96 32" 90 degree 





FLT Tour Glide 1984-1986 FLT83 51" BT81 42" 90 degree 




FLTC 1984-1986 FLT83 51" BT81 42" 90 degree 


FLTC 1989 BT87 62" BT81 42" 90 degree 


FLTCU 1989 BT87 62" BT81 42" 90 degree 



FLTR Road Glide 1998-2001 BT87 62" BT96 44" 90 degree yes 

FLTR Road Glide 2002-2006 BT87 62" FLH02 41" 90 degree yes 

FLTR Road Glide 2007-up FXD06 62" FLH02 40" 90 degree yes 



FXB Sturgis 1980 BT68 49" BT76 33" 90 degree 

FXB Sturgis 1981-1982 BT68 49" BT81 33" 130 degree 

FXCW Rocker 2008-up FXD06 65" BT96 32" 90 degree 

FXCW-C Rocker Custom 2008-up FXD06 65" BT96 32" 90 degree 



FXD Dyna Glide 2006-up FXD06 64" BT96 30" 90 degree 

FXD35 Anniversary 2006-2007 FXD06 64" BT96 33" 90 degree 

FXDB Sturgis 1991 BT87 62" BT90 32" 90 degree 

FXDB Daytona 1992-1995 BT87 68" BT90 32" 90 degree 

FXDB Street Bob 2006-up FXD06 68" BT96 32" 90 degree 

FXDC Dyna Glide Custom 1992-1995 BT87 68" BT90 32" 90 degree 

FXDC Dyna Super Glide Custom 2005 BT87 64" BT96 32" 90 degree 

FXDC Dyna Super Glide Custom 2006 FXD06 64" BT96 33" 90 degree 

FXDC Dyna Super Glide Custom 2007-up FXD06 68" BT96 30" 90 degree 

FXDF Dyna Fat Bob 2008-up FXD06 59" BT96 28" 90 degree 








FXDG Disc Glyde 1983 BT68 49" BT81 33" 130 degree 




FXDL Low Rider 2006-up FXD06 65" BT96 33" 90 degree 

FXDS Dyna Glide Super 1992-1995 BT87 68" BT90 32" 90 degree 

FXDS-Conv Dyna Glide Convertible 1996-2005 BT87 68" BT96 32" 90 degree 




FXDWG Dyna Wide Glide 2006-up FXD06 68" BT96 32" 90 degree 

FXDX Dyna Super Glide Sport 2000-2005 BT87 64" BT96 32" 90 degree 

FXDXT Dyna Super Glide T-Sport 2001-2003 BT87 64" BT96 32" 90 degree 





FXEF 1981 BT68 49" BT81 33" 130 degree 


FXLR 1987 FXR87 61" BT81 35" 90 degree 



FXR 1982 FLT79 55" BT90 33" 130 degree 

FXR 1983-1986 FLT83 51" BT81 33" 130 degree 



FXR 1999-2000 BT87 62" BT96 32" 90 degree 

FXR 2000 BT87 60" BT96 32" 90 degree 

FXRC 1985-1986 FLT83 51" BT81 33" 130 degree 

FXRC 1987 FXR87 64" BT81 33" 130 degree 

FXRD 1986 FLT83 51" BT81 35" 90 degree 

FXRDG late 1984 FLT83 51" BT81 33" 130 degree 

FXRS 1982 FLT79 55" BT81 33" 130 degree 

FXRS 1983-1986 FLT83 51" BT81 33" 130 degree 





FXRS Sport Edition- late 1985-1986 FLT83 51" BT81 33" 130 degree 

FXRT Sport Glide 1983-1986 FLT83 51" BT81 35" 90 degree 





FXS Blackline 2012-up FXD06 59" BT96 28" 90 degree 

FXSB Low Rider 1983-1985 BT68 49" BT81 33" 130 degree 

FXSB Breakout 2013-up 

FXD06 


FXST Softail Standard 1986 FXST86 51" BT81 33" 130 degree 






FXST Softail Standard 2007-up FXD06 65" BT96 32" 90 degree 

FXSTB Night Train 1999 BT87 56" BT96 28" 90 degree 

FXSTB Night Train 2000-2006 BT87 58" BT96 28" 90 degree 

FXSTB Night Train 2007-up FXD06 59" BT96 28" 90 degree 

FXSTC Softail Custom 1986 FXST86 51" BT81 33" 130 degree 




FXSTC Softail Custom 2007-up FXD06 65" BT96 32" 90 degree 

FXSTD Deuce 2000-2006 BT87 60" BT96 32" 90 degree 

FXSTD Deuce 2007 FXD06 63" BT96 32" 90 degree 

FXSTD-SE Deuce 2003-2005 BT87 60" BT96 28" 90 degree 



FXSTS Springer Softail 1996-1999 FXR87 64" BT96 35" 130 degree 


FXSTSB Bad Boy 1995 BT87 60" BT90 32" 90 degree 

FXSTSB Bad Boy 1996-1997 BT87 60" BT96 32" 90 degree 

FXWG Wide Glide 1980 BT68 49" BT76 33" 90 degree 

FXWG Wide Glide 1981-1986 BT68 49" BT81 33" 130 degree 

V-Rod models 

VRSCA V-Rod 2002-2007 hydraulic VR02 30" 90 degree 

VRSCAW V-Rod 2008 hydraulic VR02 29" 90 degree 

VRSCAWA V-Rod 2008-up hydraulic VR02 29" 90 degree 

VRSCB V-Rod 2004-2006 hydraulic VR02 29" 130 degree 

VRSCD 2006-up hydraulic VR02 29" 130 degree 

VRSCDA 2008 hydraulic VR02 29" 130 degree 

VRSC-SE 2005-2006 hydraulic VR02 30" 90 degree 

VRSCDX Night Rod Special 2007-up hydraulic VR02 29" 90 degree 

VRSCDXA Night Rod Special 2008-up hydraulic VR02 29" 90 degree 

VRSCF V-Rod Muscle 2009-up hydraulic VR02 29" 90 degree 

VRSCR Street Rod 2006-2007 hydraulic VR02 29" 130 degree 

VRSCX 2007 hydraulic VR02 30" 90 degree 


Clutch Cables 

CLUTCH CABLES 


type/model Harley-Davidson, Buell or Custom built motorcycles. Cables 


Shielding. 


prices. 

A. Zodiac Black: Stock replacement cables with a black vinyl covered 

outer cable 

B. Zodiac Braided: Same cables as above but with a Braided Stainless 


C. Zodiac Clear Coated: Clear vinyl covered Braided Stainless Steel 

outer cable 

D. Barnett Black: American made stock replacement black vinyl 

covered outer cable 

E. Barnett Braided: American made classic stainless steel braid 


F. Barnett Clear Coated: American made clear vinyl covered stainless 


G. Magnum Sterling Chromite:American made cables with a 

braided steel outer cable. Every strand of wire used for this braid is 

individually chrome plated for a super shiny appearance. Sterling 

Chromite cables and lines feature crystal clear Teflon outer jacket 

offering exceptional protection against scuffing paint and 

will never discolor. 

H. Barnett Stealth: American Made totally black cables with black 








CLUTCH CABLES 

BT52 style clutch cables 

for 1952 thru 1967 

Big Twin 4-speed models 

Fits models with stock “Mousetrap" 

clutch mechanism. Use BT68 style 

clutch cable on models with 

Mousetrap Eliminator 



Coated 

Coated 

30" (76cm) length 38618-52 110050 - - - - - - - - 

36" (91cm) length - 110051 - - - - - - - - 


CLUTCH CABLES 



Coated 

Coated 


1968 thru 1986 4-speed 

FX and FL, and FXST Softail 

1984 thru 1986 

49" (124cm) length 38618-68C 114050 114852 114333 114904 722880 638807 - 722882 710561 

51" (130cm) length - - - 114936 114906 - - - - - 

57" (145cm) length - 114011 114854 114061 114907 722881 638808 - 722883 710562 

61" (155cm) length, Heavy Duty 114052 114855 - 114908 - - - - - 


Clutch Cables 

CLUTCH CABLES 



Coated 

Coated 


1987 thru 2006 Softail, 


1987 thru 2006 FLH/FLT 

56" (142cm) length 38647-98 - - - - 720412 638787 - 722897 - 

58" (147cm) length 38665-00 - - - - 722033 638797 - 722900 722705 

60" (152cm) length 38664-00, - - - - 235412 638763 - 722879 710846 

38617-95 

62" (157cm) length 38607-87A, 114622 114856 114623 114978 232482 638731 - 722875 710548 

38601-89A 

64" (163cm) length 38666-00 - - - - 721906 638792 - 722868 722703 

66" (168cm) length - - - - - 722034 - - 722898 - 

68" (173cm) length 38602-92, 114699 114857 - 114986 232495 638737 - 722866 710558 

38649-98 

70" (178cm) length - 114665 114858 114624 114979 232473 638726 - 722876 722704 

72" (183cm) length - - - - - 721915 638793 - 722869 710559 

76" (193cm) length - 114700 114859 - 114985 232496 - - 722867 - 


CLUTCH CABLES 



Coated 

Coated 

FLT79 style clutch cables 

for 1979 thru 1982 FLT and 

1982 FXR 

55" (140cm) length 38599-80A - - - - 232464 638725 - 722862 710567 

63" (160cm) length - - - - - 232465 - 235399 - - 

CLUTCH CABLES 



Coated 

Coated 

FLT83 style clutch cables 

for 1983 thru 1986 FLT and 

1983 thru 1986 FXR 

51" (130cm) length 38599-83A - - - - 232462 638724 - 722863 710563 

57" (145cm) length - - - - - - - - - 710564 

59" (150cm) length - - - - - 232463 - 235421 - - 

14-114

Clutch Cables 

CLUTCH CABLES 



Coated 

Coated 

FXD06 style clutch cables 

for 2006 to present FXD, 

2007 to present Softail and 

2007 to present FLH/FLT 

59" (150cm) length 38665-07 114834 114860 - 114835 232959 638745 - 232956 - 

62" (157cm) length 38667-07 - - - - 232953 638743 - 232751 722930 

63" (160cm) length 38664-07 114836 114861 - 114837 232955 638744 - 722837 - 

64" (163cm) length 38787-06 - - - - 232104 638719 - - - 

65" (165cm) length 38788-06 114838 114862 - 114839 232105 638720 - 232957 722931 

65" (165cm) length 38666-07 - - - - 232725 638742 - - - 

68" (173cm) length 38789-06 - - - - 232107 638721 - 232585 722932 

70" (178cm) length - - - - - 232588 638740 - 232586 - 

72" (183cm) length - - - - - 232589 638741 - 232587 - 

CLUTCH CABLES 

FXR87 style clutch cables 

for 1987 thru 1994 FXR 

models 



Coated 

Coated 


58" (147cm) length 36755-87A - - - - 232484 638733 - 722910 710557 

61" (155cm) length 36753-87A - - - - 232483 638732 - 722909 710555 

64" (163cm) length 38606-87A - - 114619 114977 232481 638730 - 722872 710552 

66" (168cm) length - - - - - 232471 - - - - 

69" (175cm) length - - - - - 232472 - - - - 

72" (183cm) length - - - - - 232474 - - 722873 - 

CLUTCH CABLES 

FXST86 style clutch cables 

for 1986 Softail 



Coated 

Coated 

47" (119cm) length 38611-86 114323 - - 722877 638806 - 722878 - 

51" (130cm) length 38605-86 - - - - 232480 638729 - 722870 - 

54" (137cm) length - 114327 - - - - - - - - 

57" (145cm) length - - - - - - - - 722871 - 

59" (150cm) length - - - - - 232475 - - - - 


Clutch Cables 

CLUTCH CABLES 

XB96 style clutch cables 

for Buell models 

1996 to present 



Coated 

Coated 

50" (127cm) length 38696-96Y - - - - 236472 638766 - 722899 - 

CLUTCH CABLES 



Coated 

Coated 

XL71 style clutch cables 

for 1971 thru 1985 

Sportster 

38" (97cm) length 38626-84 - - - - 232491 638736 - 722884 - 

42" (107cm) length 38619-71B 114009 114863 - 114902 - - - - 710565 

46" (117cm) length - - - - - 232492 - 235393 - - 

49" (124cm) length - 114013 114864 114073 114903 - - - - 710566 


CLUTCH CABLES 



Coated 

Coated 

XL86 style clutch cables 


Sportster 

53" (135cm) length 38619-86A 114627 114865 - 114981 232488 638734 - 722885 710550 

57" (145cm) length 38620-96 114628 - - 114980 720411 638786 - 722887 710551 

59" (150cm) length 38621-86A 114631 114867 - 114982 232489 638735 - 722888 710554 

61" (155cm) length - - 114866 - - 232470 - - - - 

63" (160cm) length 37000041 - - - - 760388 760386 - 760387 - 

65" (165cm) length - - - - - 720415 - - 760399 - 

67" (170cm) length - 114632 114868 114634 114983 232469 - - 760395 - 

XR08 style clutch cables 


XR 1200 

Stock Length 38786-08A - - - - 760394 760393 - - - 



THROTTLE AND IDLE CABLES FOR 

HARLEY-DAVIDSON & BUELL 


type/model Harley-Davidson, Buell or Custom built motorcycles. Cables 


Shielding. 


prices. 

A. Zodiac Black: Stock replacement cables with a black vinyl covered 

outer cable 

B. Zodiac Braided: Same cables as above but with a Braided Stainless 


C. Zodiac Clear Coated: Clear vinyl covered Braided Stainless Steel 

outer cable 

D. Barnett Black:American made stock replacement black vinyl covered 

outer cable 

E. Barnett Braided: American made classic stainless steel braid 


F. Barnett Clear Coated: American made clear vinyl covered stainless 


G. Magnum Sterling Chromite:American made cables with a 

braided steel outer cable. Every strand of wire used for this braid is 

individually chrome plated for a super shiny appearance. Sterling 

Chromite cables and lines feature crystal clear Teflon outer jacket 

offering exceptional protection against scuffing paint and will never 

discolor. 

H. Barnett Stealth: American Made totally black cables with black 








Throttle and idle cables come with 90 or 130 degree elbows. The 

90 degree elbows add approx. 3 1/2" (8.9cm) to the cable length, 

130 degree elbows add approx. 5" (12.7cm) to the cable length. Do 

not mix 90 and 130 degree elbows for throttle and idle on the same 

motorcycle. 


THROTTLE CABLES OEM Zodiac Zodiac Zodiac Zodiac Barnett Barnett Barnett Barnett Magnum 


Coated 

Coated 

BT76 style throttle cables 

for 1976 thru 1980 Big Twin 

and Sportster models 

33" stock length on 1976 thru 1980 

Big Twin and Sportster models with 

single cable twist grip and Keihin 

butterfly carburetor. Cables have a 

1/4"-20 threaded 90 degree elbow 

on throttle grip end 

33" (84cm) length, 90 degree elbow 56313-76, 114018 114869 114063 114909 722812 638798 - 722814 710518 

56314-78 

39" (99cm) length, 90 degree elbow - 114020 - - 114910 - - - - 710519 

41" (104cm) length, 90 degree elbow - - 114870 - - 722813 638799 - 722815 - 



THROTTLE CABLES 


for 1981 thru 1985 Sportster, 




Coated 

Coated 

5/16"-18 threaded elbow on 


33" (84cm) length, 130 degree elbow 56324-81C 114210 114871 114212 114911 233121 638761 - 722822 710514 

35" (89cm) length, 130 degree elbow 56306-88 - - - - 233078 638757 - 722803 - 

35" (89cm) length, 90 degree elbow 56336-83, - - - - 233074 638755 - 722849 710522 

56343-88 

38" (97cm) length, 130 degree elbow - 114214 114872 114216 114912 233123 - - 722823 710515 

40" (102cm) length, 90 degree elbow - - - - - 233071 - 235369 - - 

41" (104cm) length, 130 degree elbow - - - - - 722821 638801 235377 722823 - 

42" (107cm) length, 90 degree elbow 56327-81B 114655 114873 114656 114958 233056 638749 - 722830 710526 

48" (122cm) length, 90 degree elbow - 114686 114874 - 114959 233057 - 235367 - - 


IDLE CABLES 


1981 thru 1985 Sportster, 






Coated 

Coated 

33" (84cm) length, 130 degree elbow 56323-81C 114202 114875 114204 114913 233122 638762 - 722817 710532 


35" (89cm) length, 90 degree elbow 56337-83, - - - - 233076 638756 - 722840 710538 

56342-88 

38" (97cm) length, 130 degree elbow - 114206 114876 - 114914 233124 - 235353 234519 710533 

40" (102cm) length, 90 degree elbow - - - - - 233073 - - - - 

41" (104cm) length, 130 degree elbow - - - - - 722816 638800 235379 722818 - 

42" (107cm) length, 90 degree elbow 56328-81B 114657 114877 114658 114968 233054 638748 235362 722826 710542 

48" (122cm) length, 90 degree elbow - 114688 114878 - 114996 233055 - - 235363 - 





for 1990 thru 1995 






Coated 

Coated 

29 1/2" (75cm) length, 90 degree elbow 56343-90 114661 114879 - 114960 - - - - - 

32" (81cm) length, 90 degree elbow 56356-92 114779 114780 - 114778 233066 638752 - 722851 710528 

35" (89cm) length, 90 degree elbow 56306-90 114643 114880 114644 114951 233082 638759 - 722804 710517 

38" (97cm) length, 90 degree elbow - 114692 114881 114693 114961 - - - - - 

40" (102cm) length, 90 degree elbow - - - - - 722850 638804 - - - 

42" (107cm) length, 90 degree elbow 56327-90, 114721 - - - 233058 638750 - 722827 710597 

56376-94 

46" (117cm) length, 90 degree elbow - - - - - - - - - - 

48" (122cm) length, 90 degree elbow - 114751 - - - 233059 - 235381 - 710525 


IDLE CABLES 


1990 thru 1995 






Coated 

Coated 

29 1/2" (75cm) length, 90 degree elbow 56342-90 114659 114882 114660 114969 - - - - 710534 

32" (81cm) length, 90 degree elbow 56355-92 114782 114783 - 114781 233068 638753 - 722842 710544 


38" (97cm) length, 90 degree elbow - 114690 114884 114691 114971 - - - - 710540 

40" (102cm) length, 90 degree elbow - - - - - 722841 638802 - - 710832 

42" (107cm) length, 90 degree elbow 56328-90, 114725 - - - 233060 638751 - 722831 710541 

56375-94 

46" (117cm) length, 90 degree elbow - - - - - - - - - - 

48" (122cm) length, 90 degree elbow - 114753 - - - 233061 - 235383 - - 





for Softail 1996 to present, 

Dyna 1996 to present and 

FLH/FLT 1996 thru 2001 

Snap-in style 1/4" diameter elbow 

at throttle grip end, angle: 



Coated 

Coated 

28" (71cm) length, 90 degree elbow 56432-98, - 114885 - - 720413 638788 - 722834 722712 

56633-06 

30" (76cm) length, 90 degree elbow 56343-96, - - - - 232039 638706 - - 710591 

56634-06 

32" (81cm) length, 90 degree elbow 56356-96A, 114663 114886 114616 114962 238191 638770 - 722854 710593 

56343-01, 

56421-06 

34" (86cm) length, 90 degree elbow - - - - - 720417 - 720425 760402 710592 

35" (89cm) length, 130 degree elbow 56306-96 114713 - 114714 114952 238193 638771 - 722805 710589 

38" (97cm) length, 90 degree elbow - 114694 114887 114621 114963 238192 - - 722848 - 

40" (102cm) length, 90 degree elbow - - - - - 722853 638805 - 722855 - 


42" (107cm) length, 90 degree elbow 56327-96 114723 - - - 238187 638768 - 722828 722707 

44" (112cm) length, 90 degree elbow 56379-96 - - - - - - - 722858 - 

48" (122cm) length, 90 degree elbow - - - - - 238188 - - 722859 722708 



IDLE CABLES 


Softail 1996 to present, 

Dyna 1996 to present and 

FLH/FLT 1996 thru 2001 

WITHOUT Cruise Control 





Coated 

Coated 

28" (71cm) length, 90 degree elbow 56433-98, - - - - 720414 638789 - 722835 722726 

56634-06, 

56637-06 


56633-06 

32" (81cm) length, 90 degree elbow 56355-96A, 114731 114888 114732 114975 238417 638775 - 722845 710828 

56342-01 

34" (86cm) length, 90 degree elbow - - - - - 720418 - 720426 - 710827 


38" (97cm) length, 90 degree elbow - 114762 114890 114763 114976 238418 - - 722839 710824 



42" (107cm) length, 90 degree elbow 56328-96 114727 - - - 238413 638774 - 722832 722721 

44" (112cm) length, 90 degree elbow 56368-96 - - - - - - - 722927 - 

48" (122cm) length, 90 degree elbow - - - - - 238414 - 238426 722857 722722 




THROTTLE CABLES OEM Zodiac Zodiac Zodiac Zodiac Barnett Barnett Barnett Barnett Magnum 


Coated 

Coated 

FLH02 style throttle cables 

for 2002 thru 2007 FLH and 


38" (97cm) length, 90 degree elbow 56376-02 - - - - 232008 638703 - - - 

40" (102cm) length, 90 degree elbow 56357-02, - - - - 232009 638704 - - 722714 

56526-02 

46" (117cm) length, 90 degree elbow - - - - - - - - - 722715 

IDLE CABLES OEM Zodiac Zodiac Zodiac Zodiac Barnett Barnett Barnett Barnett Magnum 


Coated 

Coated 

FLH02 style idle cables for 

2002 thru 2007 FLH and 


WITHOUT Cruise Control 


45" (114cm) length, 90 degree elbow - - - - - - - - - 722730 

FLH style idle cables for 1996 thru 2007 FLH and FLT models with Cruise Control 

37" (94cm) length, 90 degree elbow 56237-99A - - - - 232044 638711 - - 722731 

38" (97cm) length, 90 degree elbow 56358-02 - - - - 232048 638714 - 723101 722736 

39" (99cm) length, 90 degree elbow 56622-02 - - - - - - - - 722728 


56372-98 

43" (109cm) length, 90 degree elbow 56358-96 - - - - 723100 638809 - - 722733 


VR02 style throttle cables for 2002 to present V-Rod models 




36" (91cm) length, 90 degree elbow - - - - - 738814 638814 - - - 

VR02 style idle cables for 2002 to present V-Rod models 




36" (91cm) length, 90 degree elbow - - - - - 738815 638815 - - - 

XB96 style throttle cables for 1996 thru 1998 Buell models 

32" (81cm) length 56429-96Y - - - - 236470 638764 - - - 

XB96 style idle cables for 1996 thru 1998 Buell models 

32" (81cm) length 56430-96 - - - - 236471 638765 - - - 





for 1986 and 1987 




Coated 

Coated 

32" (81cm) length, 130 degree elbow 56308-86 - - - - 233050 638746 - 722806 710527 

38" (97cm) length, 130 degree elbow - - - - - 233051 - - 760403 - 

IDLE CABLES 


1986 and 1987 




Coated 

Coated 

32" (81cm) length, 130 degree elbow 56309-86 - - - - 233052 638747 - 722809 710543 

38" (97cm) length, 130 degree elbow - - - - - 233053 - 235357 760404 - 




Coated 

Coated 



for 1988 thru 1995 




36" (91 cm) length, - 114678 114892 114679 114955 232476 - - 722874 710521 


XL88 style idle cables for 1988 

thru 1995 Sportster models 




130 degree elbow - 114684 114894 114685 114970 232477 - 235361 722799 710537 



30" (76 cm) length, 56400-96, 114649 114895 - 114956 721904 638790 - 722860 710834 


32" (81 cm) length, 56381-96 - - - - 238185 638767 - 722808 710838 



90 degree elbow - - - - - - - - - 710837 


130 degree elbow - 114680 114896 - 114998 721909 638818 - 760396 710835 


130 degree elbow - - - - - 238186 638816 - 751256 710839 






Coated 

Coated 





32" (81 cm) length, 56382-96 - - - - 238411 638773 - 722811 710844 



90 degree elbow - - - - - - - - - - 




130 degree elbow - - - - - 238412 638817 238424 760398 710845 


2007-up XL Sportster 

30" (76 cm) length, 56884-07 116100 116103 - 116102 723102 638810 - 723104 760409 



36" (91 cm) length, - 116105 116108 - 116107 751130 638812 - 751132 760410 



XL07 style idle cables for 2007- 

up XL Sportster 

30" (76 cm) length, 56885-07 116110 116113 - 116112 723103 638811 - 723105 760411 


34" (86cm) length, 130 degree elbow - - - - 760385 760383 - 760384 - 

36" (91 cm) length, - 116115 116118 - 116117 751131 638813 - 751133 760412 


XR08 style throttle cables for 


Stock length 56637-08 - - - - 760389 760391 - - - 

XR08 style Idle cables for 


Stock length 56639-08 - - - - 760390 760392 - - - 




THROTTLE AND IDLE CABLES FOR USE WITH AFTERMARKET CARBURETORS 

Zodiac Zodiac Zodiac Barnett Barnett Barnett Barnett 

Black Braided Clear Coated Black Stealth Braided Clear Coated 

Throttle cables for use with Mikuni HS40 carburetor and 1986 thru 1995 style throttle grip 




Idle cables for use with Mikuni HS40 carburetor and 1986 thru 1995 style throttle grip 




Throttle cables for use with Mikuni HS40 carburetor and 1996 to present snap-in style throttle grip 



Idle cables for use with Mikuni HS40 carburetor and 1996 to present snap-in style throttle grip 



Throttle cables for use with early Mikuni HSR42 and HSR45 carburetors and 1986 thru 1995 style threaded throttle grip 





38" (97 cm) length, 130 degree elbow 114559 - 114941 - - 233976 722894 

Idle cables for use with early Mikuni HSR42 and HSR45 carburetors and 1986 thru 1995 style threaded throttle grip 





38" (97 cm) length, 130 degree elbow 114560 - - - - - 722896 

Throttle cables for use with early Mikuni HSR42 and HSR45 carburetors and 1996 snap-in style throttle grip 





Idle cables for use with early Mikuni HSR42 and HSR45 carburetors and 1996 snap-in style throttle grip 





Throttle cables for use with Mikuni HSR carburetors on 1997 to present Buell models 

32" (81 cm) length - - - 232006 - - - 

Idle cables for use with Mikuni HSR carburetors on 1997 to present Buell models 

32" (81 cm) length - - - 232007 - - - 

Throttle cables for use with SU, Bendix, S&S Super B and Super D carburetors and 1986 thru 1995 threaded throttle 


Idle cables for use with SU, Bendix, S&S Super B and Super D carburetors and 1986 thru 1995 threaded throttle 


Throttle cables for use with S&S Super E & Super G carburetors and 1986 thru 1995 style threaded throttle 



Throttle cables have a 5/16"-18 threaded elbow on the throttle grip end 



Idle cables for use with S&S Super E & Super G carburetors and 1986 thru 1995 style threaded throttle 



Idle cables have a 1/4"-20 threaded elbow on the throttle grip end 



Throttle cables for use with S&S Super E & Super G carburetors and 1996 to present snap-in style throttle 



Throttle cables have a 1/4" snap-in elbow on the throttle grip end 


38" (97 cm) length, 90 degree elbow - 114720 114957 710292 638782 - 722905 


Idle cables for use with S&S Super E & Super G carburetors and 1996 to present snap-in style throttle 



Idle cables have a 7/32" snap-in elbow at the throttle grip end 




Throttle cables for Buells with S&S Super E & Super G carburetors 



Idle cables for Buells with S&S Super E & Super G carburetors

Chapter 14 - Zodiac

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?