Aquaculture for all

Closer to shrimp aquacultureGetting the most out of Artemia in shrimp aquaculture

Shrimp Live feed Artemia +15 more

Artemia are valuable as live feeds for the early life stages of shrimp. While they might be expensive, if used correctly – as explained below – they should fully justify the investment

by
Alune thumbnail

The use of Artemia, or brine shrimp, as live feed in shrimp farming is commonly practised in hatcheries. In early life stages, shrimp larvae prefer live feed, as it is easier for their undeveloped gut to digest, and it provides high nutritional value. Artemia are also easy to use, have a long shelf life and can be hatched by the shrimp farmers when needed. Nauplii are the most common stage of Artemia used as live feeds, particularly in the hatchery and nursery phases.

Close-up of Artemia Nauplii
Artemia still form a core component of hatchery nutrition

Why Artemia are important

In the early days of culture, Artemia are critical for helping the post-larvae (PL) acclimatise, as well as in providing nutrition and health benefits. As PLs are fed with Artemia in the hatcheries, using formulated commercial feed right after stocking would shock their gut systems. Feeding Artemia at the early stage of culture may help them transition more smoothly. And the rich nutrient content, such as essential amino acids and polyunsaturated fatty acids, helps to boost their health and enhance their growth.

The common practice in Indonesia, according to Wawan Siswanto, the Indonesian sales manager of INVE Aquaculture, is for hatcheries to give farmers enough Artemia for one day, as a bonus for the purchase of their PL. Although the use of brine shrimp is still limited, “more shrimp farmers are using Artemia as an integral part of the early days of shrimp culture,” he says. Farmers usually use Artemia for seven days, with a ratio of one can of Artemia per million PL.

Artemia provision is only recommended in limited volumes and for a short period. We recommend the use of Artemia in the nursery and grow-out phase for three to seven days. As well as the high cost, excessive use of Artemia may actually cause more harm than good, because uneaten Artemia may compete for resources with the PL and their metabolite excretion may also deteriorate water quality. Artemia can also carry diseases, so it is important to ensure that your supply comes from a trusted, biosecure source.

While the use of Artemia requires considerable investment, the robust health and better growth of the shrimp should offset the cost, safeguard the overall cycle and provide higher profit down the line.

Feeding rates

The recommended feeding rate is 100 nauplii per shrimp, per day, administered over two to three feeding sessions. One gram of Artemia cysts equates to approximately 180,000 nauplii. The amount of Artemia cysts needed for a pond depends on the number of PL.

Let’s say we have 1 million PL stocked, how many grams of cysts do we need? Simply multiply the amount of PL by 100, which is the amount of nauplii per shrimp, and then divide it by 180,000. As a result, for 1 million PL, we need 556 grams of cysts per day.

How to hatch and use Artemia

Artemia cysts need to be hatched and harvested before being fed to the PL. This process requires a hatching and harvesting device (see Figure 1 below). Here is one way to do it.

Graph showing how to aerate Artemia to induce hatching
Figure 1. Hatching and harvesting of Artemia

© Alune

Hatching

  • Use a hatching tube with a little outlet at the bottom
  • Sterilise the tube using chlorine and fill it with water of 28-29 ppt salinity, which has been previously sterilised using chlorine and neutralised with sodium thiosulfate.
  • Further neutralise the water using an aeration hose that has been previously sprayed with disinfectant and add NaHCO3 (sodium bicarbonate) to reach a water pH level of 8.4.
  • Put the cysts into the water, at a rate of 1 gram of cysts for 2 litres of water. Apply strong aeration to make sure that the water is mixed perfectly.
  • Put an LED lamp, with approximately 2,000 lux of illuminance, on top of the tube.
  • Maintain the water temperature to always be below 30°C – ideally at 28°C to 29°C.
  • Hatch the cysts for 24 hours.
Collection of green Artemia cysts
Cyst shells should float to the surface of the water 24 hours after aeration

© Patrick Sorgeloos

Harvesting

  • Stop the aeration after 24 hours and wait for the cyst shells to float on the surface of the water.
  • Remove the cyst shells using a scoop net, open the valve at the bottom and collect the nauplii by placing a pail or bucket below the hatching tube.
  • Finally, the Artemia nauplii can be fed to the PL by directly pouring them into the nursery or grow-out ponds.

Conclusion

Despite the cost, Artemia should be considered by penaeid shrimp farmers with intensive or supra-intensive systems, due to its beneficial impacts for shrimp PL at the early stages of production. We only touched the surface of this topic and we hope we can dive deeper into the finer details in the near future.

The Alune* farming experts will be sharing their experiences and research in regular articles on The Fish Site as part of the Closer to shrimp aquaculture series.

*Alune is part of Hatch’s portfolio, but The Fish Site remains editorially independent.

Create an account now to keep reading

It'll only take a second and we'll take you right back to what you were reading. The best part? It's free.

Already have an account? Sign in here

Series: Closer to shrimp aquaculture

Preparing shrimp farms for wet weather

As shrimp producers across the globe face more extreme weather events due to climate change, the Alune* farming experts give their advice on how farmers can prepare for the rainy season and keep their ponds healthy.

Shrimp feeds of the future

A review of the latest scientific studies by Alune* suggests that fish meal inclusion in shrimp feeds can be significantly reduced, offering hope for a more sustainable shrimp farming sector.